Structural and Optical Annealing Route-Dependent Properties of CZTS Thin Films Grown by One-Step Electrodeposition with Free Annealing Sulfurization for Photovoltaic Application
Source abstract
Abstract
In the electrodeposition-anneal processes, the as-deposited film presents a deficiency of S which makes sulfurization inevitable. In this paper, an electrolyte was used for elaborating Cu2ZnSnS4 thin films with free annealing sulfurization onto indium-doped tin oxide-coated glass substrates for solar cell applications. For a one-step elaboration of CZTS thin films, a potentiostatic process has been adopted, and the deposition potential effect has been studied. The prepared samples were treated by annealing at different temperatures and subsequently were considered for structural and morphological properties with the aim to comprehend the growth behavior and to promote the film characteristics. X-ray diffraction (XRD) patterns showed the characteristic peaks at (112), (200) and (224) planes, which correlate with a Kesterite thin film structure and another phase impurity. The uniform area of the film and the grain size transformation of the particles relative to annealing temperature was investigated using scanning electron microscopy and the XRD analysis. From the optical study, the gap energy Eg was enlarged with changed annealing temperature in the range of 1.7–1.48 eV.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. M. Jeon, Y. Tanaka, T. Shimizu, and S. Shingubara, Energy Proc. 10, 255 (2011).10.1016/j.egypro.2011.10.187 ↗
2. E.M. Mkawi, K. Ibrahim, M.K.M. Ali, K.M.A. Saron, M.A. Farrukh, and N.K. Allam, J. Mater. Sci. Mater. Electron. 26, 222 (2015).10.1007/s10854-014-2387-z ↗
3. C.P. Chan, H. Lam, K.Y. Wong, and C. Surya, Mater. Res. Soc. Symp. Proc. 1123, 05 (2008).10.1557/PROC-1123-1123-P05-06 ↗
4. K. Oishi, G. Saito, K. Ebina, M. Nagahashi, K. Jimbo, W.S. Maw, H. Katagiri, M. Yamazaki, H. Araki, and A. Takeuchi, Thin Solid Films 517, 1449 (2008).10.1016/j.tsf.2008.09.056 ↗
5. S. Jae-Seung, L. Sang-Yul, L. Jae-Choon, N. Hyo-Duk, and K. Kyoo-Ho, Sol. Energy Mater. Sol. Cells 75, 155 (2003).10.1016/S0927-0248(02)00127-7 ↗
6. S.W. Shin, S.M. Pawar, C.H. Park, J.H. Yun, J.H. Moon, J.H. Kim, and J.Y. Lee, Sol. Energy Mater. Sol. Cells 12, 3202 (2011).10.1016/j.solmat.2011.07.005 ↗
7. N.D. Sankir, E. Aydin, H. Unver, and E. Uluer, Int. J. Renew. Energy Res. (IJRER) 2, 491 (2012).
8. S. Abermann, Sol. Energy 94, 37 (2013).10.1016/j.solener.2013.04.017 ↗
9. A.G. Kannan, T.E. Manjulavalli, and J. Chandrasekaran, Proc. Eng. 141, 15 (2016).10.1016/j.proeng.2015.08.1112 ↗
10. S.J. Patil, V.C. Lokhande, D.W. Lee, and C.D. Lokhande, Opt. Mater. 58, 418 (2016).10.1016/j.optmat.2016.06.011 ↗
11. S.W. Shin, J.H. Han, C.Y. Park, A.V. Moholkar, J.Y. Lee, and J.H. Kim, J. Alloys Compd. 516, 96 (2012).10.1016/j.jallcom.2011.11.143 ↗
12. J. Huang, X. Ma, L. Cao, J. Wu, and H. He, Mater. Lett. 61, 3920 (2007).10.1016/j.matlet.2006.12.058 ↗
13. A.P. Abbott, G. Capper, D.L. Davies, R.K. Rasheed, and V. Tambyrajah, Chem. Commun. 1, 70 (2003).10.1039/b210714g ↗
14. M. Farinella, R. Inguanta, T. Spanò, P. Livreri, S. Piazza, and C. Sunseri, Energy Proc. 44, 105 (2014).10.1016/j.egypro.2013.12.015 ↗
15. S. Ahmaed, K.B. Reuter, O. Gunawan, L. Guo, L.T. Romankiw, and H. Deligianni, Adv. Energy Mater. 2, 253 (2012).10.1002/aenm.201100526 ↗
16. M. Farinella, P. Livreri, S. Piazza, C. Sunseri, R. Inguanta, in Electroplating of Nanostructures, 2nd edn., ed. by M. Aliofkhazraei (2015).
17. W. Dang, X. Ren, W. Zi, L. Jia, and S. Liu, J. Alloys Compd. 650, 1 (2015).10.1016/j.jallcom.2015.07.203 ↗
18. S.M. Pawar, B.S. Pawar, K.V. Gurav, D.W. Bae, S.H. Kwon, S.S. Kolekar, and J.H. Kim, Jpn. J. Appl. Phys. 51, 10 (2012).10.1143/JJAP.51.10NC27 ↗
19. T.S. Tlemçani, E.B. Benamar, F.C. El Moursli, F. Hajji, Z. Edfouf, M. Taibi, H. Labrim, B. Belhorma, S. Aazou, G. Schmerber, K. Bouras, Z. Sekkat, A. Dinia, A. Ulyashin, A. Slaoui, and M. Abdlefdil, Energy Proc. 84, 127 (2015).10.1016/j.egypro.2015.12.305 ↗
20. S. Azmi, M. Nohair, M. El Marrakchi, E. M. Khoumri and M. Dabala, Effect of the complexing agents on the properties of electrodeposited CZTS thin films, in 2018 7th International Conference on Renewable Energy Research and Applications (ICRERA), (Paris, 2018), pp. 1346–1351. https://doi.org/10.1109/icrera.2018.8566894 .10.1109/icrera.2018.8566894 ↗
21. S. Azmi et al., Comparative study on Cu2ZnSnS4 (CZTS) thin film using different sulfur precursor, in 2018 6th International Renewable and Sustainable Energy Conference (IRSEC), (Rabat, Morocco, 2018), pp. 1–6. https://doi.org/10.1109/irsec.2018.8702966 .10.1109/irsec.2018.8702966 ↗
22. S. Azmi, L. Pezzato, M. Sturaro, E.M. Khoumri, A. Martucci, and M. Dabalà (2018). https://doi.org/10.1007/s11581-018-2719 .10.1007/s11581-018-2719 ↗
23. J. Tao, J. He, K. Zhang, J. Liu, Y. Dong, L. Sun, P. Yang, and J. Chu, Mater. Lett. 135, 8 (2014).10.1016/j.matlet.2014.07.144 ↗
24. A. Tang, Z. Li, F. Wang, M. Dou, M. Pan, Y. Pan, and J. Guan, Appl. Surf. Sci. 402, 70 (2017).10.1016/j.apsusc.2017.01.079 ↗
25. T. Shiyani, M. Patel, I. Mukhopadhyay, and A. Ray, IETE Tech. Rev. 33, 26 (2016).10.1080/02564602.2015.1045044 ↗
26. S.S. Basha and M.C. Rao, Ceram. Int. 44, 648 (2018).10.1016/j.ceramint.2017.09.224 ↗
27. A. Kumar, P. Ranjan, and A.D. Thakur, Mater. Today Proc. (2018). https://doi.org/10.1016/j.matpr.2017.11.059 .10.1016/j.matpr.2017.11.059 ↗
28. A.K. Singh, A. Shrivastava, M. Neergat, and K.R. Balasubramaniam, Thin Films Sol. Energy (2017). https://doi.org/10.1016/j.solener.2017.06.063 .10.1016/j.solener.2017.06.063 ↗