journal article·2012-08

The Effect of Heat Treatment on Structural and Multiferroic Properties of Phase-Pure BiFeO3

M. Yasin Shami, M.S. Awan, M. Anis-ur-Rehman

Journal of Electronic Materials· Volume 41· Issue 8
Publisher page

Abstract

Phase-pure multiferroic BiFeO3 (BFO) was prepared by the coprecipitation technique using diverse precursors bismuth oxide at temperature as low as 400°C. The dependence of structural, microstructural, thermal, electrical (AC and DC), and magnetic properties on sintering temperature was systematically investigated. Uniaxially pressed samples (O8 mm) were sintered in air at 500°C to 800°C for 4 h. X-ray diffraction analysis was used to determine the amorphous and perovskite nature of as-synthesized and calcined/sintered samples, respectively. The crystallite size of sintered powders increased from 47 nm to 67 nm. Scanning electron microscopy showed grain growth during sintering, which improved intergranular connectivity and decreased porosity in the samples. The ferroelectric to paraelectric Curie transition temperature (TC) of pure BFO powder was detected by differential scanning calorimetry analysis and found to be 820°C ± 1°C. The samples exhibited high AC resistivity and dielectric constant, and low loss tangent values. The samples exhibited weak ferromagnetic behavior with an unsaturated magnetization versus magnetic field hysteresis loop at room temperature. Ferroelectric behavior and variation in remnant polarization and coercivity were observed from polarization versus electric field loops. Enhanced capacitance in the magnetic field revealed the magnetoelectric effect in the samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Multiferroics and related materials · Ferroelectric and Piezoelectric Materials · Dielectric properties of ceramics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. C.H. Wang, Z.F. Liu, L. Yu, Z.M. Tian, and S.L. Yuan, Mater. Sci. Eng. B 176, 1243 (2011).10.1016/j.mseb.2011.06.016 ↗
2. V.S. Puli, A. Kumar, N. Panwar, I.C. Panwar, and R.S. Katiyar, J. Alloys Compd. 509, 8223 (2011).10.1016/j.jallcom.2011.05.077 ↗
3. Z. Wen, L. You, X. Shen, X. Li, D. Wu, J. Wang, and A. Li, Mater. Sci. Eng. B 176, 990 (2011).10.1016/j.mseb.2011.05.031 ↗
4. G. Biasotto, A.Z. Simões, C.R. Foschini, M.A. Zaghete, J.A. Varela, and E. Longo, Mater. Res. Bull. 46, 2543 (2011).10.1016/j.materresbull.2011.08.010 ↗
5. K. Liu, H. Fan, P. Ren, and C. Yang, J. Alloys Compd. 509, 1901 (2011).10.1016/j.jallcom.2010.10.084 ↗
6. D. Varshney, A. Kumar, and K. Verma, J. Alloys Compd. 509, 8421 (2011).10.1016/j.jallcom.2011.05.106 ↗
7. X. Zhang, Y. Sui, X. Wang, J. Mao, R. Zhu, Y. Wang, Z. Wang, Y. Liu, and W. Liu, J. Alloys Compd. 509, 5908 (2011).10.1016/j.jallcom.2011.03.037 ↗
8. A. Kumar and K.L. Yadav, Mater. Sci. Eng. B 176, 227 (2011).10.1016/j.mseb.2010.11.012 ↗
9. Z.M. Tian, Y.S. Zhang, S.L. Yuan, M.S. Wu, C.H. Wang, Z.Z. Ma, S.X. Huo, and H.N. Duan, Mater. Sci. Eng. B 177, 74 (2012).10.1016/j.mseb.2011.07.012 ↗
10. H. Ke, W. Wang, Y. Wang, J. Xu, D. Jia, Z. Lu, and Y. Zhou, J. Alloys Compd. 509, 2192 (2011).10.1016/j.jallcom.2010.09.213 ↗
11. M.Y. Shami, M.S. Awan, and M. Anis-ur-Rehman, J. Alloys Compd. 509, 10139 (2011).10.1016/j.jallcom.2011.08.063 ↗
12. Y. Yao, B. Ploss, C.L. Mak, and K.H. Wong, Appl. Phys. A 99, 211 (2009).10.1007/s00339-009-5499-1 ↗
13. M.S. Bernardo, T. Jardiel, M. Peiteado, A.C. Caballero, and M. Villegas, J. Alloys Compd. 509, 7290 (2011).10.1016/j.jallcom.2011.04.087 ↗
14. Y. Ding, T.H. Wang, W.-C. Yang, T.C. Lin, C.S. Tu, Y.D. Yao, and K.T. Wu, IEEE Trans. Mag. 47, 513 (2011).10.1109/TMAG.2010.2103553 ↗
15. M. Srivastava, A.K. Ojha, S. Chaubey, and P.K. Sharma, Mater. Sci. Eng. B 175, 14 (2010).10.1016/j.mseb.2010.06.005 ↗
16. P. Pandit, S. Satapathy, and P.K. Gupta, Phys. B 406, 2669 (2011).10.1016/j.physb.2011.03.081 ↗
17. S.K. Pradhan and B.K. Roul, J. Phys. Chem. Solids 72, 1180 (2011).10.1016/j.jpcs.2011.07.017 ↗
18. M. Anis-ur-Rehman, M.A. Malik, M. Akram, K. Khan, and A. Maqsood, Phys. Scr. 83, 015602 (2011).10.1088/0031-8949/83/01/015602 ↗
19. R. Palai, R. Katiyar, H. Schmid, P. Tissot, S. Clark, J. Robertson, S. Redfern, G. Catalan, and J. Scott, Phys. Rev. B 77, 014110 (2008).10.1103/PhysRevB.77.014110 ↗
20. Y.-Q. Zheng, G.-Q. Tan, H.-Y. Miao, A. Xia, and H.-J. Ren, Mater. Lett. 65, 1137 (2011).10.1016/j.matlet.2011.01.026 ↗
21. A. Chaudhuri, S. Mitra, M. Mandal, and K. Mandal, J. Alloys Compd. 491, 703 (2010).10.1016/j.jallcom.2009.11.049 ↗
22. T.N. Soitah and C. Yang, Curr. Appl. Phys. 10, 724 (2010).10.1016/j.cap.2009.06.060 ↗
23. A. Azam, A. Jawad, A.S. Ahmed, M. Chaman, and A.H. Naqvi, J. Alloys Compd. 509, 2909 (2011).10.1016/j.jallcom.2010.11.153 ↗
24. Z. Dai and Y. Akishige, J. Phys. D 43, 445403 (2010).10.1088/0022-3727/43/44/445403 ↗
25. G. Catalan, Appl. Phys. Lett. 88, 102902 (2006).10.1063/1.2177543 ↗
26. C. Koops, Phys. Rev. 83, 121 (1951).10.1103/PhysRev.83.121 ↗
27. S. Zhang, L. Wang, Z. Gao, X. Zhang, D. Wang, and Y. Ma, Mater. Lett. 65, 3309 (2011).10.1016/j.matlet.2011.07.028 ↗
28. D.-C. Jia, J.-H. Xu, H. Ke, W. Wang, and Y. Zhou, J. Eur. Ceram. Soc. 29, 3099 (2009).10.1016/j.jeurceramsoc.2009.04.023 ↗
29. S.Y. Yang, L.W. Martin, S.J. Byrnes, T.E. Conry, S.R. Basu, D. Paran, L. Reichertz, J. Ihlefeld, C. Adamo, A. Melville, Y.H. Chu, C.H. Yang, J.L. Musfeldt, D.G. Schlom, J.W. Ager, and R. Ramesh, Appl. Phys. Lett. 95, 062909 (2009).10.1063/1.3204695 ↗
30. H. Singh, A. Kumar, and K.L. Yadav, Mater. Sci. Eng. B 176, 540 (2011).10.1016/j.mseb.2011.01.010 ↗