Enhancement of Oxidation Resistance and Electrical Properties of Indium-Doped Copper Thin Films
Source abstract
Abstract
Copper thin films with high conductivity and good resistance to electromigration can be used in advanced electronic devices. However, the poor corrosion resistance of copper must be overcome. This work elucidates the possibility of using a self-forming passivation layer to prevent copper oxidation in lightly indium-doped copper thin films deposited directly on glass substrates and annealed under various oxygen atmospheres. The resistivity of the studied film declined gradually as the film was annealed at an elevated temperature because of the grain growth of the Cu film and the precipitation of indium from the In-doped Cu thin film, as revealed by X-ray diffraction, four-point probe measurements, and transmission electron microscopy. A copper film with high indium content exhibited superior passivation when the film was annealed in an oxygen-rich ambient, but it exhibited high resistivity because of its high indium content. The electrical and passivation properties demonstrated that indium is a promising alloying element for use in copper films for future metallization structures and thin-film transistors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Semiconductor materials and devices · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. S. Takayama, N. Tsutsui, J. Vac. Sci. Technol. B 14(5), 3257 (1996)10.1116/1.588817 ↗
2. T. Arai, H. Iiyori, Y. Hiromasu, M. Atsumi, S. Ioku, and K. Furuta, IBM J. Res. Develop. 42, 491 (1998)10.1147/rd.423.0491 ↗
3. E. Iwamura, T. Ohnishi, K. Yoshikawa, and K. Itayama, J. Vac. Sci. Technol. A 12(5), 2922 (1994)10.1116/1.578966 ↗
4. S. Takayama and N. Tsutsui, J. Vac. Sci. Technol. A 14(4), 2499 (1996)10.1116/1.580009 ↗
5. T. Arai, A. Makita, Y. Hiromasu, and H. Takatsuji, Thin Solid Films 383, 287 (2001)10.1016/S0040-6090(00)01794-6 ↗
6. W.H. Lee, B.S. Cho, B.J. Kang, H.J. Yang, and J.G. Lee, Appl. Phys. Lett. 79, 3962 (2001)10.1063/1.1424062 ↗
7. P.J. Ding and W.A. Lanford, Appl. Phys. Lett. 64, 2897 (1994)10.1063/1.111408 ↗
8. W.H. Lee, H.L. Cho, B.S. Cho, J.Y. Kim, Y.S. Kim, W.G. Jung, H. Kwon, J.H. Lee, P.J. Reucroft, C.M. Lee, and J.G. Lee, J. Electrochem. Soc. 147, 3066 (2000)10.1149/1.1393855 ↗
9. W.A. Lanford, P.J. Ding, W. Wang, S. Hymes, S.P. Muraka, Thin Solid Films 262, 234 (1995)10.1016/0040-6090(95)05837-0 ↗
10. J.S. Fang and H.Y. Hsieh, J. Electro. Mater. 36, 129 (2007)10.1007/s11664-006-0017-0 ↗
11. H. Sirringhaus, S.D. Theiss, A. Kahn, and S. Wanger, IEEE Electron. Dev. Lett. 18, 388 (1997)10.1109/55.605448 ↗
12. Metals Handbook, Vol. 8 (Materials Park, OH: ASM Handbook Committee)
13. T.B. Massalski, ed., Binary Phase Diagram, 2nd ed. (ASM International: Ohio, 1990)
14. Y. Zhu, K. Minura, and M. Isshiki, Corr. Sci. 46, 2445 (2004)10.1016/j.corsci.2004.02.002 ↗
15. M. Uhrmacher, A. Bartos, and W. Bolse, Mater. Sci. Eng. A 116, 129 (1989)10.1016/0921-5093(89)90137-8 ↗
16. Y.S. Gong, C. Lee, and C.K. Yang, J. Appl. Phys. 77, 5422 (1995)10.1063/1.359234 ↗
17. Z.E. Horváth, G. Petó, Z. Pászti, É. Zsoldos, E. Szilágyi, G. Battistig, T. Lohner, G.L. Molnár, and J. Gyulai, Nucl. Instr. And Meth. B 148, 868 (1999)10.1016/S0168-583X(98)00837-4 ↗