Aluminum-Scandium: A Material for Semiconductor Packaging
Source abstract
Abstract
A well-known aluminum-scandium (Al-Sc) alloy, already used in lightweight sports equipment, is about to be established for use in electronic packaging. One application for Al-Sc alloy is manufacture of bonding wires. The special feature of the alloy is its ability to harden by precipitation. The new bonding wires with electrical conductivity similar to pure Al wires can be processed on common wire bonders for aluminum wedge/wedge (w/w) bonding. The wires exhibit very fine-grained microstructure. Small Al3Sc particles are the main reason for its high strength and prevent recrystallization and grain growth at higher temperatures (>150°C). After the wire-bonding process, the interface is well closed. Reliability investigations by active power cycling demonstrated considerably improved lifetime compared with pure Al heavy wires. Furthermore, the Al-Sc alloy was sputter-deposited onto silicon wafer to test it as chip metallization in copper (Cu) ball/wedge bonding technology. After deposition, the layers exhibited fine-grained columnar structure and small coherent Al3Sc particles with dimensions of a few nanometers. These particles inhibit softening processes such as Al splashing in fine wire bonding processes and increase the thickness of remnant Al under the copper balls to 85% of the initial thickness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. G. Harman, Wire Bonding in Microelectronics, 3rd ed. (New York: McGraw-Hill, 2010).
2. H. Liu, N. Fank, and C. Acosta, Int. J. Microcircuits Electron. Packag. 22, 121 (1999).
3. J. Goehre, U. Geissler, M. Schneider-Ramelow, and K. Lang, 7th International Conference on Integrated Power Electronics Systems (CIPS) (Berlin-Offenbach: VDE-Verlag, 2012), paper 06.2.
4. P. Agyakwa, M. Corfield, L. Yang, J. Li, V. Marques, and C. Johnson, Microelectron. Reliab. 51, 2 (2011). doi: 10.1016/j.microrel.2010.08.018 .10.1016/j.microrel.2010.08.018 ↗
5. L. Merkle, T. Kaden, M. Sonner, and A. Gademann, 2nd Electronics System-Integration Technology Conference ESTC (2008). doi: 10.1109/ESTC.2008.4684554 .10.1109/ESTC.2008.4684554 ↗
6. D. Siepe, R. Bayerer, and R. Roth, 6th International Conference on Integrated Power Electronics Systems (CIPS), (Berlin Offenbach: VDE-Verlag, 2010).
7. R. Schmidt, U. Scheuermann, and E. Milke, PCIM Europe (2012) (Berlin-Offenbach: VDE-Verlag, 2012), paper 104.
8. F. Cosiansi, E. Mattiuzzo, M. Turnaturi, S. Thomas, and S. Kötter, 8th International Conference on Integrated Power Electronics Systems (CIPS) (Berlin-Offenbach: VDE-Verlag, 2014).
9. U. Geissler, E. Milke, P. Prenosil, M. Schneider-Ramelow, and K.-D. Lang, GMM-Fachbericht 71 (Berlin: VDE-Verlag, 2012), pp. 227–232.
10. M. Schneider-Ramelow, U. Geissler, S. Schmitz, W. Grübl, and B. Schuch, J. Electron. Mater. 42, 3 (2014). doi: 10.1007/s11664-012-2383-0 .10.1007/s11664-012-2383-0 ↗
11. P.S. Chauhan, A. Choubey, Z. Zhong, and M. Pecht, Copper Wire Bonding, 1st ed. (New York: Springer, 2013).10.1007/978-1-4614-5761-9_1 ↗
12. H. Clauberg, P. Backus, and B. Chylak, Microelectron. Reliab. (2011). doi: 10.1016/j.microrel.2010.05.001 .10.1016/j.microrel.2010.05.001 ↗
13. J. Røyset and N. Ryum, Int. Mater. Rev. 50, 19 (2005).10.1179/174328005X14311 ↗
14. E. Zschech, HTM 51 (München: Carl-Hanser-Verlag, 1996), vol. 3, pp. 137–144.10.1515/htm-1996-510303 ↗
15. J. Röyset, Metall. Sci. Technol. 25, 11 (2007).
16. D.N. Seidman, E.A. Marquis, and D.C. Dunand, Acta Mater. 50, 4021 (2002). doi: 10.1016/S1359-6454(02)00201-X .10.1016/S1359-6454(02)00201-X ↗
17. J. Röyset, N. Ryum, D. Bettella, A. Tocco, Z. Jia, J.K. Solberg, and O. Reiso, Mater. Sci. Eng. A 483–484, 175 (2008). doi: 10.1016/j.msea.2006.09.164 .10.1016/j.msea.2006.09.164 ↗
18. S. Ogawa and H. Nishimura, IEEE Electron Devices Meeting (1991). doi: 10.1109/IEDM.1991.235449 .10.1109/IEDM.1991.235449 ↗
19. T. Hara, N. Hosoda, S. Nagano, and T. Ueda, Jpn. J. Appl. Phys. 32, L1394 (1993).10.1143/JJAP.32.L1394 ↗
20. E. Milke, S. Thomas, U. Geißler, and M. Schneider- Ramelow, U.S. Patent WO 2014/079726 A1, May, 30, 2014.
21. K.A. Gscheidner and F.W. Calderwood, Bull. Alloy Phase Diagr. 10, 34 (1989). doi: 10.1007/BF02882170 .10.1007/BF02882170 ↗
22. S.I. Fujikawa, M. Sugaya, H. Takei, and K.I. Hirano, J. Less-Common Met. 63, 87 (1979). doi: 10.1016/0022-5088(79)90211-X .10.1016/0022-5088(79)90211-X ↗
23. Heraeus, http://heraeus-contactmaterials.com/media/ webmedia_local/media/downloads/documentsbw/factsheets_ bw_2012/Factsheet_PowerCu_2012.pdf (2012).
24. U. Geissler, J. Funck, M. Schneider-Ramelow, H.-J. Engelmann, I. Rooch, W.H. Müller, and H. Reichl, J. Electron. Mater. 40, 239 (2011).10.1007/s11664-010-1439-2 ↗
25. J. Goehre, M. Schneider-Ramelow, U. Geißler, and K.-D.Lang, 6th International Conference on Integrated Power Electronics Systems (CIPS), (Berlin-Offenbach: VDE-Verlag, 2010).
26. C. Ehrhardt, U. Geissler, J. Höfer, M.S. Broll, M. Schneider-Ramelow, K.-D. Lang, and S. Schmitz, 9th International Conference on Integrated Power Electronics Systems (CIPS) (Berlin-Offenbach: VDE-Verlag, 2016).
27. U. Geissler, J. Göhre, S. Thomas, M. Schneider-Ramelow, and K.-D. Lang, PCIM Europe 2013 (Berlin-Offenbach: VDE-Verlag GMBH, 2013), pp. 1081–1085.
28. H. Yongdong, Z. Xinming, and Y. Jianghai, China Foundry 6, 214 (2009).