Optimum Conditions for Preparation of High-Performance (Ba0.97Ca0.03)(Ti0.94Sn0.06)O3 Ceramics by Solid-State Combustion
Source abstract
Abstract
The effects of calcination conditions (950°C to 1200°C for 2 h to 6 h) and sintering temperature (1300°C to 1500°C for 2 h) on phase formation, microstructure, and electrical behavior of lead-free piezoelectric (Ba0.97Ca0.03)(Ti0.94Sn0.06)O3 (BCTS) ceramics produced by solid-state combustion using glycine as fuel have been investigated. BCTS powder with pure perovskite structure was obtained by calcination at 1100°C for 4 h. The microstructure of the BCTS powders showed almost spherical shape with average particle size increasing from 184 nm to 320 nm as the calcination temperature and soaking time were increased. The XRD patterns of all ceramics exhibited single perovskite structure. Rietveld refinement analysis indicated that the BCTS ceramics exhibited coexistence of orthorhombic and tetragonal phase in all samples with increased tetragonal phase content with increasing sintering temperature. The average grain size, density, dielectric constants at room (e r) and Curie temperature (e C), remanent polarization (P r), and piezoelectric constant (d 33) increased as the sintering temperature was increased up to 1400°C, then decreased. BCTS ceramic sintered at 1400°C exhibited the highest relative density (98%), highest dielectric response (e r = 4951, e C = 19,185), good ferroelectric behavior (P r = 12.74 μC/cm2 and coercive field E c = 1.60 kV/cm), and highest d 33 value (528 pC/N). The large piezoelectricity of BCTS ceramics makes them good candidates for use in lead-free applications to replace Pb-based ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. J.F. Tressler, S. Alkoy, and R.E. Newnham, J. Electroceram. 2, 257 (1998).10.1023/A:1009926623551 ↗
2. Y. Saito, H. Takao, T. Tani, T. Nonoyama, K. Takatori, T. Homma, T. Nagaya, and M. Nakamura, Nature 432, 84 (2004).10.1038/nature03028 ↗
3. E. Cross, Nature 432, 24 (2004).10.1038/nature03142 ↗
4. D. Damjanovic, Curr. Opin. Solid State Mater. Sci. 3, 469 (1998).10.1016/S1359-0286(98)80009-0 ↗
5. T. Karaki, K. Yan, T. Miyamoto, and M. Adachi, Jpn. J. Appl. Phys. 46, L97 (2007).10.1143/JJAP.46.L97 ↗
6. D.Z. Xue, Y.M. Zhou, H.X. Bao, J.H. Gao, C. Zhou, and X.B. Ren, Appl. Phys. Lett. 99, 122901 (2011).10.1063/1.3640214 ↗
7. W. Li, Z.J. Xu, R.Q. Chu, P. Fu, and G.Z. Zang, J. Am. Ceram. Soc. 94, 4131 (2011).10.1111/j.1551-2916.2011.04888.x ↗
8. W. Li, Z.J. Xu, R.Q. Chu, P. Fu, and G.Z. Zang, J. Eur. Ceram. Soc. 32, 517 (2012).10.1016/j.jeurceramsoc.2011.09.020 ↗
9. K. Wang, J.F. Li, and N. Liu, Appl. Phys. Lett. 93, 092904 (2008).10.1063/1.2977551 ↗
10. Y.P. Guo, K. Kakimoto, and H. Ohsato, Mater. Lett. 59, 241 (2005).10.1016/j.matlet.2004.07.057 ↗
11. P. Zhao, B.P. Zhang, and J.F. Li, Appl. Phys. Lett. 91, 172901 (2007).10.1063/1.2794405 ↗
12. J.A. Zvirgzds, P.P. Kapostis, and J.V. Zvirgzde, Ferroelectrics 40, 75 (1982).10.1080/00150198208210600 ↗
13. Y. Hiruma, Y. Watanabe, H. Nagata, and T. Takenaka, Key Eng. Mater. 350, 93 (2007).10.4028/www.scientific.net/KEM.350.93 ↗
14. D. Lin, D. Xiao, J. Zhu, and P. Yu, Appl. Phys. Lett. 88, 062901 (2006).10.1063/1.2171799 ↗
15. Y. Hiruma, K. Yoshii, H. Nagata, and T. Takenaka, Ferroelectrics 346, 114 (2007).10.1080/00150190601180471 ↗
16. C. Kornphom and T. Bongkarn, Mater. Sci. 20, 479 (2014).
17. K. Mathrmool, N. Vittayakorn, and T. Bongkarn, Ferroelectrics 490, 95 (2016).10.1080/00150193.2015.1072010 ↗
18. C. Kornphom, N. Vittayakorn, and T. Bongkarn, Ferroelectrics 490, 44 (2016).10.1080/00150193.2015.1070239 ↗
19. P. Bhupaijit, C. Kornphom, N. Vittayakorn, and T. Bongkarn, Ceram. Int. 41, S81 (2015).10.1016/j.ceramint.2015.03.226 ↗
20. T. Bongkarn, S. Chootin, S. Pinitsoontorn, and S. Maensiri, J. Alloys Compd. 682, 14 (2016).10.1016/j.jallcom.2016.04.285 ↗
21. C. Kornphom, N. Vittayakorn, and T. Bongkarn, J. Mater. Sci. 51, 4142 (2016).10.1007/s10853-016-9737-6 ↗
22. W. Yansen, D. Kim, K.J. Parwanta, C. Liu, and B.W. Lee, Curr. Appl. Phys. 15, 120 (2015).10.1016/j.cap.2014.12.001 ↗
23. V.S. Marques, L.S. Cavalcate, J.C. Sczancoski, E.C. Paris, J.M.C. Teixeira, J.A. Varela, F.S. De Vicente, M.R. Joya, P.S. Pizani, M.S. Li, M.R.M.C. Santos, and E. Longo, Spectrochim. Acta 74, 1050 (2009).10.1016/j.saa.2009.08.049 ↗
24. W.D. Kingery and B. Francois, Sintering Key Papers, ed. S. Somiya and Y. Moriyoshi (Netherlands: Springer, 1990), p. 467.