Hygro-thermo-mechanical Behavior of Adhesive-Based Flexible Chip-on-Flex Packaging
Source abstract
Abstract
Although adhesive-based chip-on-flex (COF) packaging technologies have many advantageous features, such as flexibility and compatibility with standard semiconductor and microelectronics packaging processes, the low hygro-thermal resistance leads to reliability concerns. Thus, finite element (FE) modeling and experimental testing have been used to investigate the effects of temperature and humidity conditions on the hygro-thermo-mechanical behavior of a thin flexible anisotropic conductive adhesive (ACA)-based COF packaging technology. The investigation starts from process modeling of the thermo-mechanical behavior of the technology during the ACA bonding process. The validity of the process modeling is demonstrated by temperature and warpage experiments. Furthermore, three-dimensional (3-D) transient moisture diffusion FE analysis through a thermal–moisture analogy based on the “wetness” technique is performed to evaluate the moisture distribution, in which the moisture properties of the polyimide (PI) substrate are obtained through a moisture absorption experiment. Then, the effect of the moisture properties of the ACA adhesive and PI substrate on the moisture diffusion behavior is examined. Finally, following process modeling, 3-D hygro-thermo-mechanical FE analysis under a constant temperature and humidity condition is undertaken to assess the influence of hygro-thermal aging and stress relaxation of the ACA adhesive on the long-term contact performance of the interconnects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Mechanical Behavior of Composites · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. D. Mao, M.A. Quevedo-Lopez, H.N. Alshareef, H. Stiegler, and B.E. Gnade, Org. Electron. 11, 925 (2010).10.1016/j.orgel.2010.02.012 ↗
2. Y.T. Hong, Z.Q. He, N.S. Lennhoff, D.A. Banach, and J. Kanicki, J. Electron. Mater. 33, 312 (2004).10.1007/s11664-004-0137-3 ↗
3. K. Chen, R. Zenner, M. Arneson, and D. Mountain, Ultra-thin electronic device package, in IEEE Electronic Components and Technology Conference, 1999, pp. 657–662.10.1109/ECTC.1999.776249 ↗
4. M.J. Yim, J.-S. Hwang, J.G. Kim, J.Y. Ahn, H.J. Kim, W. Kwon, and K.-W. Paik, J. Electron. Mater. 33, 76 (2004).10.1007/s11664-004-0297-1 ↗
5. H.-C. Cheng, C.-L. Ho, W.-C. Chen, and S.-S. Yang, IEEE Trans. Compon. Packag. Technol. 29, 577 (2006).10.1109/TCAPT.2006.880507 ↗
6. E.H. Wong, R. Rajoo, S.W. Koh, and T.B. Lim, J. Electron. Packag. 124, 122 (2002).10.1115/1.1461367 ↗
7. M.-Y. Tsai, C.-Y. Huang, C.-Y. Chiang, W.-C. Chen, and S.-S. Yang, IEEE Trans. Compon. Packag. Technol. 30, 517 (2007).10.1109/TCAPT.2007.898691 ↗
8. T. Ikeda, W.-K. Kim, and N. Miyazaki, IEEE Trans. Compon. Packag. Technol. 29, 551 (2006).10.1109/TCAPT.2006.880510 ↗
9. J.-Y. Yoon, I. Kim, and S.-B. Lee, J. Electron. Packag. 131, 021012-1 (2009).
10. W.H. Zhu, S.L. Gan, and C.L. Toh, Mechanical Properties of Molding Compounds (MCs) under Different Moisture Conditions and in a Wide Temperature Range, in 5th International Conference on Thermal and Mechanical Simulation and Experiments in Micro-electronics and Micro-Systems, 2004, pp. 593−59810.1109/ESIME.2004.1304097 ↗
11. D.C.C. Lam and J. Wang, J. Electron. Mater. 36, 226 (2007).10.1007/s11664-007-0088-6 ↗
12. I.L. Chen, Correlation Between the Viscoelastic Properties of Anisotropic Conductive Adhesive and Reliability of Chip-on-Flex, Master Thesis, Department of Power Mechanical Engineering, National Tsing Hua University, Taiwan, 2009. (in Chinese)
13. L.K. Teh, M. Teo, E. Anto, C.C. Wong, S.G. Mhaisalkar, P.S. Teo, and E.H. Wang, IEEE Trans. Compon. Packag. Technol. 28, 506 (2005).10.1109/TCAPT.2005.848572 ↗
14. C.W. Tan, Y.W. Chiu, and Y.C. Chan, Mater. Sci. Eng. B 98, 255 (2003).10.1016/S0921-5107(03)00047-3 ↗
15. K.N. Chiang, C.W. Chang, and J.D. Lin, J. Electron. Packag. 123, 331 (2001).10.1115/1.1389847 ↗
16. H.-C. Cheng, C.-H. Ma, C.-F. Yu, S.-T. Lu, and W.-H. Chen, Comput. Mater. Contin. 38, 129 (2013).
17. S. Yoon, B. Han, and Z. Wang, J. Electron. Packag. 129, 421 (2007).10.1115/1.2804090 ↗
18. M.-Y. Tsai, C.Y. Wu, C.Y. Huang, and S.S. Yang, IEEE Trans. Adv. Packag. 31, 454 (2008).10.1109/TADVP.2008.927844 ↗
19. K.M. Chen, C.Y. Wu, C.H. Wang, H.-C. Cheng, and N.C. Huang, J. Electron. Mater. 43, 4229 (2014).10.1007/s11664-014-3332-x ↗
20. C.H. Shen and G.S. Springer, J. Compos. Mater. 10, 2 (1976).10.1177/002199837601000101 ↗
21. A.C. Loos and G.S. Springer, J. Compos. Mater. 13, 131 (1979).10.1177/002199837901300205 ↗
22. E.H. Wong and R. Rajoo, Microelectron. Reliab. 43, 2087 (2003).10.1016/S0026-2714(03)00378-0 ↗
23. JIS K 7209, Testing Methods for Water and Boiling Water Absorption of Plastics. Japanese Standards Association, 1984.
24. SEMI G66-96, Test Method for the Measurement of Water absorption Characteristics for Semiconductor Molding Compounds. Semiconductor Equipment and Materials International, 1996.
25. M.L. Williams, R.F. Landel, and J.D. Ferry, J. Am. Chem. Soc. 77, 3701 (1955).10.1021/ja01619a008 ↗
26. D.M. Espino, D.E.T. Shepherd, and D.W.L. Hukins, J. Mech. 29, N9 (2013).10.1017/jmech.2012.128 ↗
27. C.Y. Cao, Q.-H. Qin, and A.B. Yu, J. Mech. 29, 661 (2013).10.1017/jmech.2013.54 ↗
28. G.N. Ellison, Thermal Computations for Electronic Equipment (Malabar, FL: R.E. Krieger, 1989), p. 25.
29. H.-C. Cheng, W.-R. Ciou, W.-H. Chen, J.-L. Kuo, H.-C. Lu, and R.-B. Wu, Appl. Therm. Eng. 53, 78 (2013).10.1016/j.applthermaleng.2013.01.006 ↗
30. W.S. Kwon and K.W. Paik, J. Appl. Polym. Sci. 93, 2634 (2004).10.1002/app.20844 ↗
31. M. Teo, S.G. Mhaisalkar, E.H. Wong, P.S. Teo, C.C. Wong, K. Ong, C.F. Goh, and L.K. Teh, IEEE Trans. Compon. Packag. Technol. 28, 157 (2005).10.1109/TCAPT.2004.843175 ↗