journal article·2013-07

Fabrication of Titanium Oxide-Based Composites by Reactive SPS Sintering and Their Thermoelectric Properties

K. Fuda, T. Shoji, S. Kikuchi, Y. Kunihiro, S. Sugiyama

Journal of Electronic Materials· Volume 42· Issue 7
Publisher page

Abstract

Titanium oxide-based composites containing (1) Nb, (2) Nb and Sr, and (3) Sr and La were fabricated by a combination of wet processing and reactive spark plasma sintering in which the metal oxide components were reduced by reaction with titanium nitride. If only TiO2 was used as the starting material, several Magneli-type phases of oxygen-deficient titanium oxides were obtained. When mixed with Nb ions with Ti:Nb = 0.9:0.1, microsegregation of Nb ions was observed (case 1). If Sr was added, a perovskite, SrTiO3 (STO) phase occurred (case 2), which contained La ions in the case of La addition (case 3). The sintered compacts consisted largely of grains of about 1 μm in size. In the case of Ti-Nb combination (case 1), a unique stripe pattern also appeared inside the grains. The electrical conductivity increased monotonically with increasing temperature in the case of the pure Magneli phases and the Nb-containing composite, whereas bow-shaped temperature dependences with a maximum were observed in the case of the composites containing STO phases. The Seebeck coefficients were commonly negative, and the absolute values increased with temperature. The thermal conductivity was between 2 W m−1 K−1 and 4 W m−1 K−1 in the temperature range from room temperature to 800°C. A maximum ZT of 0.34 was achieved at 800°C (case 2).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Expansion and Ionic Conductivity · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. I. Terasaki, Y. Sasago, and K. Uchinokura, Phys. Rev. B 56, R12685 (1997).10.1103/PhysRevB.56.R12685 ↗
2. J.W. Fergus, J. Eur. Ceram. Soc. 32, 525 (2012).10.1016/j.jeurceramsoc.2011.10.007 ↗
3. M. Ohtaki, T. Tsubota, K. Eguchi, and H. Arai, J. Appl. Phys. 79, 1816 (1996).10.1063/1.360976 ↗
4. T. Okuda, K. Nakanishi, S. Miyasaka, and Y. Tokura, Phys. Rev. B63, 113104 (2001).10.1103/PhysRevB.63.113104 ↗
5. T. Zhou, S.D. Bhame, E. Guilmeau, S. Marinel, and B. Raveau, J. Am. Ceram. Soc. 94, 3733 (2011).10.1111/j.1551-2916.2011.04650.x ↗
6. D. Bérardan, E. Guilmeau, A. Maignan, and B. Raveau, Solid State Commun. 146, 97 (2008).10.1016/j.ssc.2007.12.033 ↗
7. H. Ohta, S.-W. Kim, Y. Mune, T. Mizoguchi, K. Nomura, S. Ohta, T. Nomura, Y. Nakanishi, Y. Ikuhara, M. Hirano, H. Hosono, and K. Koumoto, Nat. Mater. 6, 129 (2007).10.1038/nmat1821 ↗
8. R. Zhang, C. Wang, J. Li, and K. Koumoto, J. Am. Ceram. Soc. 93, 1677 (2010).10.1111/j.1551-2916.2010.03619.x ↗
9. K. Fuda, K. Murakami, T. Shoji, and S. Sugiyama, Mater. Res. Soc. Symp. Proc. 1166, N03 (2009).10.1557/PROC-1166-N03-05 ↗
10. S. Ohta, T. Nomura, H. Ohta, M. Hirano, H. Hosono, and K. Koumoto, Appl. Phys. Lett. 87, 099108 (2005).
11. H. Muta, K. Kurosaki, and S. Yamanaka, J. Alloy. Compd. 350, 292 (2003).10.1016/S0925-8388(02)00972-6 ↗
12. Q. He, Q. Hao, G. Chen, B. Poudel, X. Wang, D. Wang, and A. Ren, Appl. Phys. Lett. 91, 052505 (2007).10.1063/1.2767775 ↗