Reaction characteristics of the Au-Sn solder with under-bump metallurgy layers in optoelectronic packages
Source abstract
Abstract
The reaction characteristics of molten Au/Sn eutectic solder with potential diffusion-barrier materials of optoelectronic packages were investigated. The characteristics were studied by reflowing the solder on Pt, Ni, and Co plates, respectively, and by measuring the thickness of the reaction product. In addition, the dissolution rate of Pt into the solder was measured. The results indicated that Pt, which is commonly used as the diffusion-barrier layer in the under-bump metallurgy (UBM) of optoelectronic packages, reacts readily with the molten solder, resulting in discontinuous reaction products at the solder/Pt interface. Cobalt, on the other hand, reacted with the solder at an order of magnitude slower rate than that of Pt and provided an effective barrier against the reaction with the solder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. S. Mino, T. Ohyama, Y. Akahori, T. Hashimoto, Y. Yamada, M. Yangisawa, and Y. Muramoto J. Lightwave Technol. 14, 2475 (1996).10.1109/50.548144 ↗
2. S. Mino, Y. Yamada, Y. Akahori, M. Yasu, and K. Moriwaki, J. Lightwave Technol. 14, 1840 (1996).10.1109/50.532021 ↗
3. G. Nakagawa, T. Yamamoto, S. Sasaki, M. Norimatsu, N. Yamamoto, T. Nosaka, K. Terada, K. Tanaka, K. Miura, and M. Yano, J. Lightwave Technol. 16, 66 (1998).10.1109/50.654985 ↗
4. R.M. Almeida, J. Non-Cryst. Solids 259, 176 (1999).10.1016/S0022-3093(99)00527-X ↗
5. D.G. Ivey, Microelectron. J. 29, 281 (1998).
6. B. Djurfors and D.G. Ivey, Mater. Sci. Eng. B 78, 44 (2000).10.1016/S0921-5107(00)00515-8 ↗
7. W. Pittroff, T. Reiche, J. Barnikow, A. Klein, U. Merkel, K. Vogel, and J. Wurfl, Appl. Phys. Lett. 67, 2367 (1995).10.1063/1.114347 ↗
8. M.F. Dautartas, G.E. Blonder, Y.H. Wong, and Y.C. Chen, IEEE Trans. Comp., Hybrids, Manuf. Technol. 18, 552 (1995).
9. B.J. Lee, N.M. Hwang, and H.M. Lee, Acta Mater. 45, 1867 (1997).10.1016/S1359-6454(96)00325-4 ↗
10. J.H. Lee, J.H. Park, Y.H. Lee, and Y.S. Kim, J. Electron. Mater., 31, 576 (2002).10.1007/s11664-002-0128-1 ↗
11. S. Bader, W. Gust, and H. Hieber, Acta Metall. Mater. 43, 329 (1995).
12. M. Schaefer, W. Laub, J.M. Sabee, and R.A. Fournelle, J. Electron. Mater. 25, 992 (1996).10.1007/BF02666735 ↗
13. D.G. Ivey, S. Ingrey, J.-P. Noel, and W.M. Lau, Mater. Sci. Eng. B, 49, 66 (1997).10.1016/S0921-5107(97)00114-1 ↗
14. S. Chada, W. Laub, R.A. Fournelle, and D. Shangguan, J. Electron. Mater. 28, 1194 (1999).10.1007/s11664-999-0157-0 ↗
15. T.B. Masalski, ed., Binary Alloy Phase Diagrams (Columbus, OH: ASM International, 1990).
16. H.K. Kim, H.K. Liou, and K.N. Tu, Appl. Phys. Lett. 66, 2337 (1995).10.1063/1.113975 ↗
17. H.K. Kim and K.N. Tu, Appl. Phys. Lett. 67, 2002 (1995).10.1063/1.114767 ↗
18. H.K. Kim and K.N. Tu, Phys. Rev. B 53, 16027 (1996).10.1103/PhysRevB.53.16027 ↗
19. M. Schaefer, R.A. Fournelle, and J. Liang, J. Electron. Mater. 27, 1167 (1998).10.1007/s11664-998-0066-7 ↗