journal article·2002-07

Development of a high-selectivity process for electron cyclotron resonance plasma etching of II-VI semiconductors

A. J. Stoltz, J. D. Benson, M. thomas, P. R. Boyd, M. Martinka, J. H. Dinan

Journal of Electronic Materials· Volume 31· Issue 7
Publisher page

Abstract

The erosion rate of resist during electron cyclotron resonance (ECR) plasma etching of II-VI semiconductors is the limiting factor for the selectivity (values range from 5:1 to 10:1). We have measured the erosion rates of AZ 1529, a commercially available diazonaphthoquinone (DNQ) novolak photoresist, under plasma conditions optimized for etching of the underlying semiconductor and have developed an in-situ technique to "harden" the resist by exposing it to an argon-only ECR plasma. A subsequent standard plasma process can then be used to etch the II-VI material, thereby achieving selectivity values greater than 50:1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Advancements in Photolithography Techniques · Electron and X-Ray Spectroscopy Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. P. O’Dette, G. Tarnowski, V. Lukach, M. Krueger, and P.L. Vecchio, J. Electron. Mater. 28, 821 (1999).10.1007/s11664-999-0077-z ↗
2. A.J. Stoltz, M.R. Banish, J.H. Dinan, J.D. Benson, D.R. Brown, D.B. Chenault, and P.R. Boyd, J. Electron. Mater. 30, 733 (2001).10.1007/BF02665864 ↗
3. R.C. Keller, H. Zimmerman, M. Seelmann-Eggebert, and H.J. Richter, J. Electron. Mater. 25, 1270 (1996).10.1007/BF02655019 ↗
4. R.C. Keller, H. Zimmerman, M. Seelmann-Eggebert, and H.J. Richter, J. Electron. Mater. 26, 542 (1997).10.1007/s11664-997-0191-8 ↗
5. J.D. Benson, A.J. Stoltz, A.W. Kaleczyc, M. Martinka, L.A. Almeida, P.R. Boyd, J.H. Dinan (Paper presented at The 2001 U.S. Workshop on the Physics and Chemistry of II-VI Materials, Orlando, FL, October 2001).
6. L.S. Hirsch, Z. Yu, S.L. Buczkowski, T.H. Myers, and M.R. Richards-Babb, J. Electron. Mater. 26, 534 (1997).10.1007/s11664-997-0190-9 ↗
7. J.N. Johnson, L.A. Almeida, J.D. Benson, J.H. Dinan, and M. Martinka, J. Electron. Mater. 27, 657 (1998).10.1007/s11664-998-0031-5 ↗
8. J.N. Johnson, L.A. Almeida, M. Martinka, J.D. Benson, and J.H. Dinan, J. Electron. Mater. 28, 817 (1999).10.1007/s11664-999-0076-0 ↗
9. N.K. Dhar, P.R. Boyd, M. Martinka, J.H. Dinan, L.A. Almeida, and N. Goldsman, J. Electron. Mater. 29, 748 (2000).10.1007/s11664-000-0219-9 ↗
10. L.A. Almeida, N.K. Dhar, M. Martinka, and J.H. Dinan, J. Electron. Mater. 29, 754 (2000).10.1007/s11664-000-0220-3 ↗
11. M.A. Lieberman and A.J. Lichtenberg, Principles of Plasma Discharges and Materials Processing (New York: John Wiley & Sons, Inc., 1994), p. 412.
12. W.A. Moreau, Semiconductor Lithography—Principles, Practices, and Materials (New York: Plenum Press, 1988), p. 559.10.1007/978-1-4613-0885-0 ↗
13. J.M. Shaw, M. Hatzakis, E.D. Babich, J.R. Paraszczak, D.F. Witman, and K.J. Stewart, J. Vac. Sci. Technol. B 7, 1709 (1989).10.1116/1.584444 ↗
14. K. Taira, J. Takahashi, K. Kato, and K. Yanagihara, Proc. SPIE, 1593, 90 (1991).10.1117/12.56919 ↗
15. J. Economy, J.R. Lyeria, and L.A. Penderson, U.S. patent 4,289,573, March 3, 1980.
16. H.E. Adabbo and R.J.J. Williams, J. Appl. Polymer Sci. 27, 893 (1982).10.1002/app.1982.070270309 ↗
17. W.E. Feely, J.C. Imhof, and C.M. Stein, Polymer Eng. Sci. 26, 1101 (1986).10.1002/pen.760261605 ↗