The Cu/n-GaAs schottky barrier diodes prepared by anodization process
Source abstract
Abstract
The metal-insulating semiconductor (MIS) Cu/n-GaAs diodes with thin anodic-insulating layer, which is formed by anodic oxidazation on the n-GaAs substrate in aqueous 4C2H6O2+2H2O+0.1H3PO4 electrolyte with pH=2.02; anodically untreated control Cu/n-GaAs diodes; and anodically treated Cu/n-GaAs diodes (several steps of anodization in the same electrolyte followed by a dip in diluted aqueous HCl solution and a subsequent rinse in deionized water) have been prepared. The anodization has increased the barrier heights as well as the ideality factors. We have obtained barrier heights of approximately 0.68 eV, 0.90 eV, and 0.92 eV for the control sample, anodically treated sample, and MIS sample, respectively, adding the contribution caused by image-force effect only. Thus, the barrier height has been increased by at least 140 meV. Furthermore, we have calculated a mean tunneling-barrier height of x=0.025 eV for the MIS Cu/n-GaAs Schottky barrier diode (SBD).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. H.C. Card and E.H. Rhoderick, J. Phys. D4, 1589 (1971).
2. J.H. Werner, Appl. Phys. A 47, 291 (1988).10.1007/BF00615935 ↗
3. M. Sağlam, A. Türüt, Ç. Nuhoğlu, H. Efeoğlu, T. Kiliçoğlu, and M.A. Ebeoğlu, Appl. Phys. A 65, 33 (1997).10.1007/s003390050537 ↗
4. W. Mönch, Semiconductor Surfaces and Interfaces, 2nd ed. (Berlin: Springer, 1995), pp. 75–84, 364, and 382–387.10.1007/978-3-662-03134-6_6 ↗
5. L.J. Brilson, Surf. Sci. Rep. 2, 123 (1982).10.1016/0167-5729(82)90001-2 ↗
6. W. Schottky, Naturwissenchaften 26, 843 (1938).10.1007/BF01774216 ↗
7. N.F. Mott, Proc. Cambridge Philos. Soc. 34, 568 (1938).10.1017/S0305004100020570 ↗
8. J. Bardeen, Phys. Rev. 71, 717 (1947).10.1103/PhysRev.71.717 ↗
9. M.K. Hudait and S.B. Krupanidhi, Solid State Electron. 44, 1089 (2000); M.K. Hudait and S.B. Krupanidhi, Mater. Sci. Eng. B 87, 141 (2001).10.1016/S0038-1101(99)00320-2 ↗
10. Z. Chen, W. Kim, A. Salvador, S.N. Mohammed, O. Aktaş, and H. Morkoç, J. Appl. Phys. 78, 3920 (1995).10.1063/1.359910 ↗
11. A. Türüt, B. Bati, A. Kökçe, M. Sağlam, and N. Yalçin, Phys. Scripta 53, 118 (1996).10.1088/0031-8949/53/1/023 ↗
12. M.A. Ebeoğlu, F.T. Temurtaş, and Z.Z. Öztürk, Solid State Electron. 42, 23 (1998).10.1016/S0038-1101(97)00038-5 ↗
13. C. Temirci, B. Bati, M. Sağlam, and A. Türüt, Appl. Surf. Sci. 172, 1 (2001).10.1016/S0169-4332(00)00760-1 ↗
14. Z. Quennoughi, K. Boulkroun, M. Remy, R. Hugon, and J.R. Cussenot, J. Phys. D: Appl. Phys. 27, 1014 (1994).10.1088/0022-3727/27/5/020 ↗
15. Y.P. Song, R.L. Van Meirhaeghe, W.H. Laflére, and F. Cardon, Solid State Electron. 29, 633 (1986).10.1016/0038-1101(86)90145-0 ↗
16. D. Mui, S. Strite, and H. Morkoç, Solid State Electron. 34, 1077 (1991).10.1016/0038-1101(91)90103-6 ↗
17. A. Türüt, N. Yalçin, and M. Sağlam, Solid State Electron. 35, 835 (1992).10.1016/0038-1101(92)90286-L ↗
18. N. Newman, M. Van Schilfgarde, T. Kendelwicz, M.D. Williams, and W.E. Spicer, Phys. Rev. B 33, 1146 (1986).10.1103/PhysRevB.33.1146 ↗
19. G. Eftekhari, B. Tuck, and D. de Cogan, J. Phys. D: Appl. Phys. 16, 1099 (1983).10.1088/0022-3727/16/6/018 ↗
20. D.T. Quan and H. Habib, Solid State Electron. 36, 339 (1993).10.1016/0038-1101(93)90085-5 ↗
21. G. Eftekhari, Phys. Status Solidi (a) 178, 709 (2000).10.1002/1521-396X(200004)178:2<709::AID-PSSA709>3.0.CO;2-8 ↗
22. A. Callegari, D. Ralp, and N. Braslau, J. Appl. Phys. 62, 4812 (1987).10.1063/1.338984 ↗
23. Ç. Nuhoğlu, E. Ayyildiz, M. Sağlam, and A. Türüt, Appl. Surf. Sci. 135, 350 (1998).10.1016/S0169-4332(98)00311-0 ↗
24. E.H. Rhoderick and R.H. Williams Metal-Semiconductor Contacts (Oxford, U.K.: Clarendon Press, 1988), pp. 20, 48, and 99.
25. S.M. Sze, Physics of Semiconductor Devices, 2nd ed. (New York: Wiley, 1981), pp. 262, 264, 291, and 547.
26. A.M. Cowley and S.M. Sze, J. Appl. Phys. 36, 3212 (1965).10.1063/1.1702952 ↗
27. M.T. Schmidt, D.V. Podlesnik, C.F. Yu, X. Wu, R.M. Osgood, Jr., and E.S. Yang, J. Vac. Sci. Technol. B 6, 1436 (1988).10.1116/1.584236 ↗
28. M.T. Schmidt, Q.Y. Ma, D.V. Podlesnik, R.M. Osgood, and E.S. Yang, J. Vac. Sci. Technol. B 7, 980 (1989).10.1116/1.584590 ↗
29. W. Mönch, J. Vac. Sci. Technol. B 17, 1867 (1999).10.1116/1.590839 ↗
30. A.B. McLean and R.H. Williams, J. Phys. C. Solid State Phys. 21, 783 (1988).10.1088/0022-3719/21/4/016 ↗
31. M. Kleefstra and G.C. Herman, J. Appl. Phys. 51, 4923 (1980).10.1063/1.328366 ↗
32. K.W. Frese Jr., J. Appl. Phys. 53, 1571 (1982).10.1063/1.330659 ↗
33. J.P. Sullivan, R.T. Tung, M.R. Pinto, and W.R. Graham, J. Appl. Phys. 70, 7403 (1991).10.1063/1.349737 ↗
34. J.H. Werner and H.H. Güttler, J. Appl. Phys. 69, 1522 (1991).10.1063/1.347243 ↗
35. A.F. Özdemir, A. Kökçe, and A. Türüt, Appl. Surf. Sci. 191, 188 (2002).10.1016/S0169-4332(02)00181-2 ↗
36. R.T. Tung, Mater. Sci. Eng. R 35, 1 (2001).10.1016/S0927-796X(01)00037-7 ↗