Frequency-Dependent Variation of LeTID Degradation and Recovery Using Low Intensity with Different AC Biasing in TOPCon Solar Cells
Source abstract
Abstract
Abstract The efficiency and reliability of photovoltaic technologies are essential for the global transition to sustainable energy systems. Tunnel oxide passive contact (TOPCon) solar cells have gained prominence due to their high conversion efficiency and improved long-term performance. Light and elevated temperature-induced degradation (LeTID) poses a significant challenge, reducing efficiency and operational stability. Research has primarily focused on understanding the underlying mechanisms of LeTID and developing mitigation strategies. The role of alternating current (AC) biasing waveforms remains underexplored, particularly under varying frequencies. We investigated the effects of sinusoidal, square, and triangular AC waveforms at frequencies of 100 kHz, 500 kHz, and 1 MHz on the performance recovery of 4 × 4 cm2 TOPCon solar cells degraded under 0.5-sun illumination at 85°C for 11 h. Regeneration was conducted for 2 h using a peak-to-peak voltage (Vpp) of 1.4 V. Square and sinusoidal waveforms at 500 kHz and 1 MHz achieved the highest recovery across all key parameters. Triangular waveforms, although effective, demonstrated slightly lower recovery, particularly at lower frequencies. The findings highlight the importance of waveform characteristics and frequency in mitigating LeTID effects. Future work will optimize waveform parameters, such as amplitude and duty cycle, to maximize regeneration efficiency. Long-term field tests will validate these methods' applicability under real-world operating conditions, ensuring the durability and stability of TOPCon solar cells in large-scale deployments.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. R.U. Rahman, M.Q. Khokhar, H. Yousuf, M.N. Aida, J.A. Jony, P.C. Alamgeer, M.C. Madara, S. Park, and J. Yi, Optimization strategies for metallization in n-type crystalline silicon TOPCon solar cells: Pathways to elevated fill factor and enhanced efficiency. Curr. Appl. Phys.. Appl. Phys. 67, 107–114 (2024). https://doi.org/10.1016/j.cap.2024.07.012.10.1016/j.cap.2024.07.012 ↗
2. R.U. Rahman, M.Q. Khokhar, S.Q. Hussain, H. Mehmood, H. Yousuf, J.A. Jony, S. Park, and J. Yi, Progress in TOPCon solar cell technology: Investigating hafnium oxide through simulation. Curr. Appl. Phys.. Appl. Phys. 63, 96–104 (2024). https://doi.org/10.1016/j.cap.2024.04.001.10.1016/j.cap.2024.04.001 ↗
3. H. Yousuf, M.Q. Khokhar, S. Chowdhury, D.P. Pham, Y. Kim, J. Minkyu, Y. Cho, E.-C. Cho, and J. Yi, A review on topcon solar cell technology. Curr. Photovolt. Res. 9, 75–83 (2021).
4. M.A. Jensen, A.E. Morishige, J. Hofstetter, D.B. Needleman, and T. Buonassisi, Evolution of LeTID defects in p-type multicrystalline silicon during degradation and regeneration. IEEE J. Photovolt. 7(4), 980–987 (2017).10.1109/JPHOTOV.2017.2695496 ↗
5. F. Kersten, P. Engelhart, H. C. Ploigt, A. Stekolnikov, T. Lindner, F. Stenzel, J. W. Müller, A new mc-Si degradation effect called LeTID. In 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC) (pp. 1-5). IEEE. (2015)10.1109/PVSC.2015.7355684 ↗
6. A. Zuschlag, D. Skorka, & G. Hahn, Degradation and regeneration analysis in mc-Si. In 2016 IEEE 43rd Photovoltaic Specialists Conference (PVSC) (pp. 1051-1054). IEEE. (2016)10.1109/PVSC.2016.7749772 ↗
7. W. Kwapil, J. Schön, T. Niewelt, and M.C. Schubert, Temporary recovery of the defect responsible for light-and elevated temperature-induced degradation: Insights into the physical mechanisms behind LeTID. IEEE J. Photovolt 10(6), 1591–1603 (2020).10.1109/JPHOTOV.2020.3025240 ↗
8. Z.Y. Yeo, Z.P. Ling, J.W. Ho, Q.X. Lim, Y.H. So, and S. Wang, Status review and future perspectives on mitigating light-induced degradation on silicon-based solar cells. Renew. Sustain. Energy Rev. 159, 112223 (2022).10.1016/j.rser.2022.112223 ↗
9. M.G. Deceglie, T.J. Silverman, S.W. Johnston, J.A. Rand, M.J. Reed, R. Flottemesch, and I.L. Repins, Light and elevated temperature induced degradation (LeTID) in a utility-scale photovoltaic system. IEEE J. Photovolt. 10(4), 1084–1092 (2020).10.1109/JPHOTOV.2020.2989168 ↗
10. D. Chen, M. Vaqueiro Contreras, A. Ciesla, P. Hamer, B. Hallam, M. Abbott, and C. Chan, Progress in the understanding of light-and elevated temperature-induced degradation in silicon solar cells: a review. Prog. Photovolt. Res. Appl. 29(11), 1180–1201 (2021).10.1002/pip.3362 ↗
11. E. Fokuhl, T. Naeem, A. Schmid, P. Gebhardt, T. Geipel, & D. Philipp, Letid—a comparison of test methods on module level. In 36th European PV Solar Energy Conference and Exhibition (Vol. 36, pp. 816-821). (2019)
12. Z. Hu, Q. He, S. Yuan, D. Lin, L. Song, X. Yu, and D. Yang, Kinetics study on carrier injection-induced degradation and regeneration at elevated temperature in p-type cast-monosilicon passivated emitter rear contact solar cells. Solar RRL 5(7), 2100035 (2021).10.1002/solr.202100035 ↗
13. J.A. Jony, H. Yousuf, M.A. Zahid, S. Sanyal, M.Q. Khokhar, P.C. Madara, H. Yifan, M. Chu, Y. Kim, S.K. Dhungel, and J. Yi, The mechanics of light elevated temperature induced degradation (LeTID) on PERC module: a review. Trans. Elect. Electron. Mater. 25(3), 247–254 (2024). https://doi.org/10.1007/s42341-024-00526-3.10.1007/s42341-024-00526-3 ↗
14. M.U. Khan, D. Chen, S. Jafari, T. Ohshima, H. Abe, Z. Hameiri, and M. Abbott, Degradation and regeneration of radiation-induced defects in silicon: a study of vacancy-hydrogen interactions. Solar Energy Mater. Solar Cells 200, 109990 (2019).10.1016/j.solmat.2019.109990 ↗
15. L. Ning, L. Song, and J. Zhang, Research progress of light and elevated temperature-induced degradation in silicon solar cells: A review. J. Alloy. Compd. 912, 165120 (2022).10.1016/j.jallcom.2022.165120 ↗
16. F. Thome, P. Meβmer, W. Kwapil, F. Schindler, & M. C. Schubert, UV-Stability of Industrial PERC, SHJ and TOPCon Solar Cells. In 2024 IEEE 52nd Photovoltaic Specialist Conference (PVSC) (pp. 0723-0725). IEEE. (2024)10.1109/PVSC57443.2024.10749650 ↗
17. D. Young, Degradation Mechanisms in TOPCon/POLO Solar Cells (No. NREL/PR-5900-85545). National Renewable Energy Lab.(NREL), Golden, CO (United States). (2023)
18. D. Liu, M. Wright, M. Goodarzi, P.R. Wilshaw, P. Hamer, and R.S. Bonilla, Observations of contact resistance in TOPCon and PERC solar cells. Sol. Energy Mater. Sol. Cells 246, 111934 (2022).10.1016/j.solmat.2022.111934 ↗
19. D. Chen, C. Madumelu, M. Kim, B.V. Stefani, A. Soeriyadi, D. Kang, and M. Wright, Investigating the degradation behaviours of n+-doped Poly-Si passivation layers: An outlook on long-term stability and accelerated recovery. Solar Energy Mater. Solar Cells 236, 111491 (2022).10.1016/j.solmat.2021.111491 ↗
20. C. U. Madumelu, Degradation in next-generation passivating contact solar cells (Doctoral dissertation, UNSW Sydney). (2023)
21. U. Varshney, Examining the influence of surface dielectric layers and bulk properties in light-and elevated temperature-induced degradation in crystalline silicon (Doctoral dissertation, UNSW Sydney). (2021)
22. D. Chen, Elucidating the mechanics behind light-and elevated temperature-induced degradation in silicon solar cells (Doctoral dissertation, UNSW Sydney). (2020)
23. E. Krassowski, B. Jaeckel, M. Pander, D. Daßler, and S. Malik, Assessing the long-term stability of laser enhanced contact optimization (LECO) treated PERC cells in PV modules by extended indoor and outdoor durability tests. EPJ Photovolt 14, 13 (2023).10.1051/epjpv/2023004 ↗
24. F. Kersten, M. Pander, M. Koentopp, M. Turek, W. Bergholz, and T. Pernau, Towards a test standard of light and elevated temperature-induced degradation. PV Tech Power 23, 53–58 (2020).
25. C. Madumelu, F. Bowen, J. Genhua, J. Bao, S. Seunghwan, R. Chen, & M. Wright, Impact of Oxide Thickness, Emitter Sheet Resistance, and Polysilicon Doping Concentration on the Passivation Quality and Long-Term Stability of Topcon Solar Cells. Emitter Sheet Resistance, and Polysilicon Doping Concentration on the Passivation Quality and Long-Term Stability of Topcon Solar Cells.
26. S.K. Chunduri and M. Schmela, Perc solar cell technology 2016. TaiyangNews UG Munich Ger 21, 6–20 (2018).
27. S. Wieghold, A.S. Bieber, M. Mardani, T. Siegrist, and L. Nienhaus, Understanding the effect of light and temperature on the optical properties and stability of mixed-ion halide perovskites. J. Mater. Chem. C 8(28), 9714–9723 (2020).10.1039/D0TC02103B ↗
28. F. Kersten, P. Engelhart, H. C. Ploigt, A. Stekolnikov, T. Lindner, F. Stenzel, & J. W. Müller, A new mc-Si degradation effect called LeTID. In 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC) (pp. 1-5). IEEE. (2015)10.1109/PVSC.2015.7355684 ↗
29. A. Zuschlag, D. Skorka, and G. Hahn, Degradation and regeneration in mc-Si after different gettering steps. Prog. Photovolt. Res. Appl. 25(7), 545–552 (2017).10.1002/pip.2832 ↗
30. W. Kwapil, J. Schön, T. Niewelt, and M.C. Schubert, Temporary recovery of the defect responsible for light-and elevated temperature-induced degradation: Insights into the physical mechanisms behind LeTID. IEEE J. Photovolt. 10(6), 1591–1603 (2020).10.1109/JPHOTOV.2020.3025240 ↗
31. W. Fan, H. Shen, X. Zhang, and H. Pan, Method and equipment for reducing the efficiency degradation of monocrystalline passivated emitter and rear cells. Energies 17(7), 1550 (2024).10.3390/en17071550 ↗