Mixed-Dimensional Heterostructures Fabricated through Micro-Transfer Printing of InP Thin Films on Monolayer Graphene and MoS2: A Parameter Space Evaluation
Source abstract
Abstract
Abstract The heterogeneous integration of semiconductor devices grows in cost as critical device dimensions are pushed to smaller scales. Micro-assembly technologies, such as micro-transfer printing (µTP), offer a solution as they are highly scalable and cost-effective. The µTP approach enables efficient use of growth substrates by smart integration of transferred device “coupons” on receiving “target” substrates. This process allows the fabrication of novel device architectures with reduced critical dimensions and otherwise inaccessible heterojunction configurations, including mixed-dimensional heterostructures (MDH) of III–V semiconductors and two-dimensional (2D) nanomaterials. Here, we describe a process to release III–V device layers from as-grown source substrates before µTP onto 2D materials. Transferrable coupons of lattice-matched InP and InAlAs thin films grown via metal–organic chemical vapor deposition (MOCVD) on InP were fabricated by deposition of a masking oxide and photolithographic patterning, followed by etching to define and release the InP coupons from the sacrificial InAlAs layer. Coupons were micro-transfer-printed onto a range of substrates including silicon, graphene, and monolayer molybdenum disulfide. To elucidate the impact of printing conditions on InP coupon transfer, a design of experiments was conducted to characterize the µTP parameter space in terms of critical pick and print settings. Transfer printing onto low-dimensional monolayer materials can better enable site-specific, high-throughput heterogeneous integration with the high print yields demanded by scalable manufacturing and enable low complexity fabrication for diverse device applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanowire Synthesis and Applications · Graphene research and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. K.S. Novoselov, Nobel lecture: graphene: materials in the Flatland. Rev. Mod. Phys. 83(3), 837 (2011). https://doi.org/10.1103/RevModPhys.83.837.10.1103/RevModPhys.83.837 ↗
2. N.O. Weiss, H. Zhou, L. Liao, Y. Liu, S. Jiang, Y. Huang, and X. Duan, Graphene: an emerging electronic material. Adv. Mater. 24(43), 5782 (2012). https://doi.org/10.1002/adma.201201482.10.1002/adma.201201482 ↗
3. D. Akinwande, C. Huyghebaert, C.-H. Wang, M.I. Serna, S. Goossens, L.-J. Li, H.-S.P. Wong, and F.H.L. Koppens, Graphene and two-dimensional materials for silicon technology. Nature 573(7775), 507 (2019). https://doi.org/10.1038/s41586-019-1573-9.10.1038/s41586-019-1573-9 ↗
4. A.T. Neal, H. Liu, J.J. Gu, and P.D. Ye, Metal contacts to MoS2: a two-dimensional semiconductor, in 70th Device Research Conference 2012, pp. 65–66. https://doi.org/10.1109/DRC.2012.625692810.1109/DRC.2012.6256928 ↗
5. A.V. Kolobov and J. Tominaga, Two-Dimensional Transition-Metal Dichalcogenides. (Springer, Cham, 2016), vol. 239. https://doi.org/10.1007/978-3-319-31450-110.1007/978-3-319-31450-1 ↗
6. W. Ahmad, A.K. Tareen, K. Khan, M. Khan, Q. Khan, Z. Wang, and M. Maqbool, A review of the synthesis, fabrication, and recent advances in mixed dimensional heterostructures for optoelectronic devices applications. Appl. Mater. Today 30, 101717 (2023). https://doi.org/10.1016/j.apmt.2022.101717.10.1016/j.apmt.2022.101717 ↗
7. D. Jariwala, T.J. Marks, and M.C. Hersam, Mixed-dimensional van Der Waals heterostructures. Nature Mater 16(2), 170 (2017). https://doi.org/10.1038/nmat4703.10.1038/nmat4703 ↗
8. Q. Alam, S. Muhammad, and M. Idrees, first-principles study of the electronic structures and optical and photocatalytic performances of van Der Waals heterostructures of SiS P and SiC monolayers. RSC Adv. 11(24), 14263 (2021). https://doi.org/10.1039/d0ra10808a.10.1039/d0ra10808a ↗
9. T. Roy, M. Tosun, X. Cao, H. Fang, D.-H. Lien, P. Zhao, Y.-Z. Chen, Y.-L. Chueh, J. Guo, and A. Javey, Dual-gated MoS2/WSe2 van Der Waals tunnel diodes and transistors. ACS Nano 9(2), 2071 (2015). https://doi.org/10.1021/nn507278b.10.1021/nn507278b ↗
10. K. Ren, S. Wang, Y. Luo, J.-P. Chou, J. Yu, W. Tang, and M. Sun, High-efficiency photocatalyst for water splitting: a Janus MoSSe/XN (X = Ga, Al) van Der Waals heterostructure. J. Phys. D Appl. Phys. 53(18), 185504 (2020). https://doi.org/10.1088/1361-6463/ab71ad.10.1088/1361-6463/ab71ad ↗
11. D. Gomez, K. Ghosal, T. Moore, M.A. Meitl, S. Bonafede, C. Prevatte, E. Radauscher, A.J. Trindade, and C.A. Bower, Scalability and yield in elastomer stamp micro-transfer-printing, in 2017 IEEE 67th Electronic Components and Technology Conference (ECTC), 2017; pp 1779–1785. https://doi.org/10.1109/ECTC.2017.31810.1109/ECTC.2017.318 ↗
12. S. Znati, J. Wharwood, K.G. Tezanos, X. Li, and P.K. Mohseni, metal-assisted chemical etching beyond Si: applications to III–V compounds and wide-bandgap semiconductors. Nanoscale 16(23), 10901 (2024). https://doi.org/10.1039/D4NR00857J.10.1039/D4NR00857J ↗
13. X. Li and P.W. Bohn, Metal-Assisted Chemical Etching in HFÕH2O2 Produces Porous Silicon
14. X. Li, Metal assisted chemical etching for high aspect ratio nanostructures: a review of characteristics and applications in photovoltaics. Curr. Opin. Solid State Mater. Sci. 16(2), 71 (2012). https://doi.org/10.1016/j.cossms.2011.11.002.10.1016/j.cossms.2011.11.002 ↗
15. A. Uzun and J. Rimböck, in Patterned InterVia for Heterogeneous Integration of III-V Devices onto Silicon Photonics by Using Micro-Transfer Printing; Cork, Ireland, 2023.
16. D. Jariwala, T.J. Marks, and M.C. Hersam, Mixed-dimensional van Der Waals heterostructures. Nat. Mater. 16(2), 170 (2017). https://doi.org/10.1038/nmat4703.10.1038/nmat4703 ↗
17. Z. Peng, R. Yang, M.A. Kim, L. Li, and H. Liu, Influence of O2, H2O and airborne hydrocarbons on the properties of selected 2D materials. RSC Adv. 7(43), 27048 (2017). https://doi.org/10.1039/C7RA02130E.10.1039/C7RA02130E ↗
18. R. Fischbach, T. Horst, and J. Lienig, A graph-based model of micro-transfer printing for cost-optimized heterogeneous 2.5d systems, in 2019 International 3D Systems Integration Conference (3DIC) (IEEE: Sendai, Japan, 2019), pp. 1–6. https://doi.org/10.1109/3DIC48104.2019.905888610.1109/3DIC48104.2019.9058886 ↗
19. L. Zhang, C. Zhang, Z. Tan, J. Tang, C. Yao, and B. Hao, Research progress of microtransfer printing technology for flexible electronic integrated manufacturing. Micromachines 12(11), 1358 (2021). https://doi.org/10.3390/mi12111358.10.3390/mi12111358 ↗
20. A. Carlson, A.M. Bowen, Y. Huang, R.G. Nuzzo, and J.A. Rogers, Transfer printing techniques for materials assembly and micro/nanodevice fabrication. Adv. Mater. 24(39), 5284 (2012). https://doi.org/10.1002/adma.201201386.10.1002/adma.201201386 ↗
21. I. Puchades, M. Koz, and L. Fuller, Mechanical vibrations of thermally actuated silicon membranes. Micromachines 3(2), 255 (2012). https://doi.org/10.3390/mi3020255.10.3390/mi3020255 ↗
22. M. Kastner, Bonding bands, lone-pair bands, and impurity states in chalcogenide semiconductors. Phys. Rev. Lett. 28(6), 355 (1972). https://doi.org/10.1103/PhysRevLett.28.355.10.1103/PhysRevLett.28.355 ↗
23. Y.T. Megra, and J.W. Suk, Adhesion properties of 2D materials. J. Phys. D Appl. Phys. 52(36), 364002 (2019). https://doi.org/10.1088/1361-6463/ab27ad.10.1088/1361-6463/ab27ad ↗
24. J. Torres, Y. Zhu, P. Liu, S.C. Lim, and M. Yun, Adhesion energies of 2D graphene and MoS2 to silicon and metal substrates. Phys. Status Solidi (a) 215(1), 1700512 (2018). https://doi.org/10.1002/pssa.201700512.10.1002/pssa.201700512 ↗
25. C. Prevatte, M.A. Meitl, D. Gomez, K. Ghosal, S. Bonafede, B. Raymond, T. Moore, A.J. Trindade, P. Hines, I. Guven, and C.A. Bower, Pressure-Activated Electrical Interconnection During Micro-Transfer-Printing, in 2016 IEEE 66th Electronic Components and Technology Conference (ECTC); (IEEE: Las Vegas, NV, USA, 2016), pp. 1209–1215. https://doi.org/10.1109/ECTC.2016.35510.1109/ECTC.2016.355 ↗
26. F.E. Hizir, H.M. Al-Qahtani, and D.E. Hardt, in Deformation of Stamp Features with Slanted Walls during Microcontact Printing. 2014.
27. A.C. Ferrari, J.C. Meyer, V. Scardaci, C. Casiraghi, M. Lazzeri, F. Mauri, S. Piscanec, D. Jiang, K.S. Novoselov, S. Roth, and A.K. Geim, Raman spectrum of graphene and graphene layers. Phys. Rev. Lett. 97(18), 187401 (2006). https://doi.org/10.1103/PhysRevLett.97.187401.10.1103/PhysRevLett.97.187401 ↗
28. X. Zhang, X.-F. Qiao, W. Shi, J.-B. Wu, D.-S. Jiang, and P.-H. Tan, Phonon and Raman scattering of two-dimensional transition metal dichalcogenides from monolayer, multilayer to bulk material. Chem. Soc. Rev. 44(9), 2757 (2015). https://doi.org/10.1039/C4CS00282B.10.1039/C4CS00282B ↗