Modelling and Optimization of “n–i–p” Structured CdS/MASnI3/CdTe Solar Cell with SCAPS-1D for Higher Efficiency
Source abstract
Abstract
In this work, an “n–i–p” structured solar cell, ITO/CdS/MASnI3/CdTe/Au, has been investigated for its photovoltaic performance. The performance of this structure was compared with the structure without a perovskite layer, i.e. ITO/CdS/CdTe/Au. The comparative analysis, conducted utilizing SCAPS-1D solar cell simulation software, revealed superior performance for the configuration featuring the perovskite layer, with 31.55% efficiency, relative to the configuration without the perovskite layer, with 23.87% efficiency. Motivated by this finding, ITO/CdS/MASnI3/CdTe/Au was selected for further investigation. A comprehensive study was undertaken, exploring the impact of doping concentration (NA and ND), layer thickness, and defect density of the CdS, MASnI3, and CdTe layers on the overall cell performance. Through meticulous optimization of these parameters, remarkable efficiency of 32.27% was achieved, with VOC = 1.16 eV, JSC = 31.07 mA/cm2, and FF = 89.20%. These results underscore the potential of the ITO/CdS/MASnI3/CdTe/Au structure, showcasing how the introduction of a MASnI3 layer can significantly enhance device performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. IEA (2023), CO2 Emissions in 2022, IEA, Paris https://www.iea.org/reports/co2-emissions-in-2022, License: CC BY 4.0. (Accessed April 14, 2023)
2. IEA (2021), Global energy review 2021, IEA, Paris https://www.iea.org/reports/global-energy-review-2021, License: CC BY 4.0 (accessed April 14, 2023).
3. IRENA (2019), Global energy transformation: A roadmap to 2050 (2019 edition), International Renewable Energy Agency, Abu Dhabi.https://www.irena.org/publications/2019/Apr/Global-energy-transformation-A-roadmap-to-2050-2019Edition (accessed May 11, 2021).
4. R.S. Kapadnis, S.B. Bansode, A.T. Supekar, P.K. Bhujbal, S.S. Kale, S.R. Jadkar, and H.M. Pathan, Cadmium telluride/cadmium sulfide thin films solar cells: a review. ES Energy Environ. (2020). https://doi.org/10.30919/esee8c706.10.30919/esee8c706 ↗
5. Cadmium Telluride, (Department of Energy) https://www.energy.gov/eere/solar/cadmium-telluride (accessed May 13, 2023).
6. Y. Zhao, M. Boccard, S. Liu, J. Becker, X.H. Zhao, C.M. Campbell, E. Suarez, M.B. Lassise, Z. Holman, and Y.H. Zhang, Monocrystalline CdTe solar cells with open-circuit voltage over 1 v and efficiency of 17%. Nat. Energy (2016). https://doi.org/10.1038/nenergy.2016.67.10.1038/nenergy.2016.67 ↗
7. S. Du, L. Zhu, W. Li, J. Zhang, L. Wu, and W. Wang, Bilayered ZnTe/Cu1.4Te alloy thin films as a back contact for CdTe solar cells. Solar Energy (2019). https://doi.org/10.1016/j.solener.2019.04.052.10.1016/j.solener.2019.04.052 ↗
8. X. Wu, High-efficiency polycrystalline CdTe thin-film solar cells. Solar Energy (2004). https://doi.org/10.1016/j.solener.2004.06.006.10.1016/j.solener.2004.06.006 ↗
9. I.E. Tinedert, F. Pezzimenti, M.L. Megherbi, and A. Saadoune, Design and simulation of a high efficiency CdS/CdTe solar cell. Optik (2020). https://doi.org/10.1016/j.ijleo.2019.164112.10.1016/j.ijleo.2019.164112 ↗
10. W.K. Metzger, S. Grover, D. Lu, E. Colegrove, J. Moseley, C.L. Perkins, X. Li, R. Mallick, W. Zhang, R. Malik, J. Kephart, C.-S. Jiang, D. Kuciauskas, D.S. Albin, M.M. Al-Jassim, G. Xiong, and M. Gloeckler, Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells. Nature (2019). https://doi.org/10.1038/s41560-019-0446-7.10.1038/s41560-019-0446-7 ↗
11. I.E. Tinedert, A. Saadoune, I. Bouchama, and M.A. Saeed, Numerical modelling and optimization of CdS/CdTe solar cell with incorporation of Cu2O HT-EBL layer. Opt. Mater. (2020). https://doi.org/10.1016/j.optmat.2020.109970.10.1016/j.optmat.2020.109970 ↗
12. S. Ahmmed, A. Aktar, M.F. Rahman, J. Hossain, and A.B.M. Ismail, A numerical simulation of high efficiency CdS/CdTe based solar cell using NiO HTL and ZnO TCO. Optik (2020). https://doi.org/10.1016/j.ijleo.2020.165625.10.1016/j.ijleo.2020.165625 ↗
13. X. Wu, J. C. Keane, R. G. Dhere, C. DeHart, D. S. Albin, A. Duda, T. A. Gessert, S. Asher, D. H. Levi, and P. Sheldon. 16.5%-efficient CdS/CdTe polycrystalline thin-film solar cell. In Proceedings of the 17th European photovoltaic solar energy conference, vol. 995. James & James Ltd.: London, 2001.
14. A. Bosio, N. Romeo, S. Mazzamuto, and V. Canevari, Polycrystalline CdTe thin films for photovoltaic applications. Prog. Cryst. Growth Charact. Mater. (2006). https://doi.org/10.1016/j.pcrysgrow.2006.09.001.10.1016/j.pcrysgrow.2006.09.001 ↗
15. Z. Fang, X.C. Wang, H.C. Wu, and C.Z. Zhao, Achievements and challenges of CdS/CdTe solar cells. Int. J. Photoenergy (2011). https://doi.org/10.1155/2011/297350.10.1155/2011/297350 ↗
16. A. Al-qassem, V. Fedorov, L. Gagara, and T. Potlog, Reduced recombination current due to sputtered CdO nanolayer at CdS / CdTe interface. Mater. Sci. Appl. (2023). https://doi.org/10.4236/msa.2023.143011.10.4236/msa.2023.143011 ↗
17. S.W. Feng, C.M. Lai, C.H. Chen, W.C. Sun, and L.W. Tu, Theoretical simulations of the effects of the indium content, thickness, and defect density of the i-layer on the performance of p–i–n InGaN single homojunction solar cells. J. Appl. Phys. (2010). https://doi.org/10.1063/13484040.10.1063/13484040 ↗
18. N. Sun, W. Gao, H. Dong, Y. Liu, X. Liu, Z. Wu, L. Song, C. Ran, and Y. Chen, Architecture of p-i-n Sn-based perovskite solar cells: characteristics, advances, and perspectives. ACS Energy Lett. (2021). https://doi.org/10.1021/ACSENERGYLETT.1C01170.10.1021/ACSENERGYLETT.1C01170 ↗
19. N. Irannejad, B. Rezaei, and A.A. Ensafi, Self-healing 2D/3D perovskite for efficient and stable p–I–n perovskite solar cells. Chemosphere (2023). https://doi.org/10.1016/J.CHEMOSPHERE.2022.136893.10.1016/J.CHEMOSPHERE.2022.136893 ↗
20. X. Jiang, F. Wang, Q. Wei, H. Li, Y. Shang, W. Zhou, C. Wang, P. Cheng, Q. Chen, L. Chen, and Z. Ning, Ultra-high open-circuit voltage of tin perovskite solar cells via an electron transporting layer design. Nat. Commun. 111(11), 1–7 (2020). https://doi.org/10.1038/s41467-020-15078-2.10.1038/s41467-020-15078-2 ↗
21. C.K. Borah and S. Kumar, Numerical investigation of graphene and 2D-MoS2 facilitated perovskite/silicon “p–i–n” structure for solar cell application. Int. J. Energy Res. (2022). https://doi.org/10.1002/ER.7646.10.1002/ER.7646 ↗
22. O. Stroyuk, Lead-free hybrid perovskites for photovoltaics. Beilstein J. Nanotechnol. (2018). https://doi.org/10.3762/bjnano.9.207.10.3762/bjnano.9.207 ↗
23. A. Al-Qassem, V. Fedorov, L. Gagara, and T. Potlog, Reduced recombination current due to sputtered CdO nanolayer at CdS/CdTe interface. Mater. Sci. Appl. (2023). https://doi.org/10.4236/msa.2023.143011.10.4236/msa.2023.143011 ↗
24. K. Patel and P.K. Tyagi, P-type multilayer graphene as a highly efficient transparent conducting electrode in silicon heterojunction solar cells. Carbon (2017). https://doi.org/10.1016/j.carbon.2017.02.042.10.1016/j.carbon.2017.02.042 ↗
25. J. Singh, Semiconductor devices: basic principles (New Delhi: Wiley, 2014).
26. T.S. Ko, D.Y. Lin, Y.C. He, C.C. Kao, B.Y. Hu, R.H. Horng, F.L. Wu, C.H. Wu, and Y.L. Tsai, Optoelectric properties of GaInP p–i–n solar cells with different i-layer thicknesses. Int. J. Photoenergy (2015). https://doi.org/10.1155/2015/703045.10.1155/2015/703045 ↗
27. C.K. Borah, P.K. Tyagi, and S. Kumar, The prospective application of a graphene/MoS2 heterostructure in Si-HIT solar cells for higher efficiency. Nanoscale Adv. (2020). https://doi.org/10.1039/d0na00309c.10.1039/d0na00309c ↗
28. A. Haddout, A. Raidou, and M. Fahoume, Influence of the layer parameters on the performance of the CdTe solar cells. Optoelectron. Lett. (2018). https://doi.org/10.1007/s11801-018-7229-4.10.1007/s11801-018-7229-4 ↗
29. A.K. Al-mousoi, M.K.A. Mohammed, R. Pandey, D. Dastan, G. Ravi, P. Sakthivel, and G. Anandha, Simulation and analysis of lead-free perovskite solar cells incorporating cerium oxide as electron transporting layer. RSC Adv. (2022). https://doi.org/10.1039/d2ra05957f.10.1039/d2ra05957f ↗
30. J.C. Nolasco, A. Sánchez-Díaz, R. Cabŕ, J. Ferŕ-Borrull, L.F. Marsal, E. Palomares, and J. Pallar̀s, Relation between the barrier interface and the built-in potential in pentacene/C60 solar cell. Appl. Phys. Lett. (2010). https://doi.org/10.1063/13456393.10.1063/13456393 ↗
31. Y. Feng, T. Wang, M. Yu, J. Huang, W. Li, X. Hao, J. Zhang, and L. Wu, Coevaporated Cd1−xMgxTe thin films for CdTe solar cells. Renew. Energy (2020). https://doi.org/10.1016/j.renene.2019.05.139.10.1016/j.renene.2019.05.139 ↗
32. R. Singh, A. Giri, M. Pal, K. Thiyagarajan, J. Kwak, J.J. Lee, U. Jeong, and K. Cho, Perovskite solar cells with an MoS2 electron transport layer. J. Mater. Chem. A. (2019). https://doi.org/10.1039/c8ta12254g.10.1039/c8ta12254g ↗
33. M. Burgelman, K. Decock, A. Niemegeers, J. Verschraegen, S. Degrave, SCAPS manual, (2021) 1–146. https://scaps.elis.ugent.be/SCAPSmanual most recent.pdf.
34. F.F. Muhammad, M.Y. Yahya, S.S. Hameed, F. Aziz, K. Sulaiman, M.A. Rasheed, and Z. Ahmad, Employment of single-diode model to elucidate the variations in photovoltaic parameters under different electrical and thermal conditions. PLoS ONE (2017). https://doi.org/10.1371/journal.pone.0182925.10.1371/journal.pone.0182925 ↗
35. M. Tripathi, V. Vaibhav Mishra, B.S. Sengar, and A.V. Ullas, Lead-free perovskite solar cell by Using SCAPS-1D: design and simulation. Mater. Today Proc. (2022). https://doi.org/10.1016/j.matpr.2022.04.832.10.1016/j.matpr.2022.04.832 ↗
36. U. Würfel, D. Neher, A. Spies, and S. Albrecht, Impact of charge transport on current-voltage characteristics and power-conversion efficiency of organic solar cells. Nat. Commun. 6, 1–9 (2015). https://doi.org/10.1038/ncomms7951.10.1038/ncomms7951 ↗
37. U. Wurfel, A. Cuevas, and P. Wurfel, Charge carrier separation in solar cells. IEEE J. Photovoltaics. (2015). https://doi.org/10.1109/JPHOTOV.2014.2363550.10.1109/JPHOTOV.2014.2363550 ↗
38. C.K. Borah, P.K. Tyagi, S. Kumar, and K. Patel, Few-layer p-type phosphorene sheet: An efficient transparent conducting electrode in silicon heterojunction solar cell. Comput. Mater. Sci. (2018). https://doi.org/10.1016/j.commatsci.2018.04.059.10.1016/j.commatsci.2018.04.059 ↗
39. M.H. Jao, H.C. Liao, and W.F. Su, Achieving a high fill factor for organic solar cells. J. Mater. Chem. A. (2016). https://doi.org/10.1039/c6ta00126b.10.1039/c6ta00126b ↗
40. M. Diantoro, T. Suprayogi, A. Hidayat, A. Taufiq, A. Fuad, and R. Suryana, Shockley’s equation fit analyses for solar cell parameters from I–V curves. Int. J. Photoenergy (2018). https://doi.org/10.1155/2018/9214820.10.1155/2018/9214820 ↗
41. O.J. Sandberg, S. Dahlström, M. Nyman, S. Wilken, D. Scheunemann, and R. Österbacka, Impact of a doping-induced space-charge region on the collection of photogenerated charge carriers in thin-film solar cells based on low-mobility semiconductors. Phys. Rev. Appl. (2019). https://doi.org/10.1103/PhysRevApplied.12.034008.10.1103/PhysRevApplied.12.034008 ↗
42. S. Bhattacharya and S. John, Beyond 30% conversion efficiency in silicon solar cells: a numerical demonstration. Sci. Rep. (2019). https://doi.org/10.1038/s41598-019-48981-w.10.1038/s41598-019-48981-w ↗
43. A. Morales-Acevedo, Can we improve the record efficiency of CdS/CdTe solar cells? Sol. Energy Mater. Sol. Cells (2006). https://doi.org/10.1016/j.solmat.2006.02.019.10.1016/j.solmat.2006.02.019 ↗
44. V. Manjunath, R. Krishna, S. Maniarasu, E. Ramasamy, S. Shanmugasundaram, G. Veerappan, in Perovskite Photovoltaics: Basic to Advanced Concepts and Implementation, ed. by Sabu Thomas and Aparna Thankappan (Academic Press, US, 2018) p. 89–121 doi:https://doi.org/10.1016/B978-0-12-812915-9.00004-6.10.1016/B978-0-12-812915-9.00004-6 ↗
45. M. Mohan, Perovskite Photovoltaics: Basic to Advanced Concepts and Implementation, edn. by Sabu Thomas and Aparna Thankappan (Academic Press, US, 2018) p. 447–480 doi: https://doi.org/10.1016/B978-0-12-812915-9.00014-9.10.1016/B978-0-12-812915-9.00014-9 ↗
46. S. Bello, A. Urwick, F. Bastianini, A.J. Nedoma, and A. Dunbar, An introduction to perovskites for solar cells and their characterisation. Energy Rep. (2022). https://doi.org/10.1016/j.egyr.2022.08.205.10.1016/j.egyr.2022.08.205 ↗
47. A. Ghosh, S.S. Dipta, S.S.S. Nikor, N. Saqib, and A. Saha, Performance analysis of an efficient and stable perovskite solar cell and a comparative study of incorporating metal oxide transport layers. J. Opt. Soc. Am. B (2020). https://doi.org/10.1364/josab.391817.10.1364/josab.391817 ↗
48. E.W. Jones, V. Barrioz, S.J.C. Irvine, and D. Lamb, Towards ultra-thin CdTe solar cells using MOCVD. Thin Solid Films (2009). https://doi.org/10.1016/j.tsf.2008.10.093.10.1016/j.tsf.2008.10.093 ↗
49. M. Abulikemu, J. Barbé, A. El Labban, J. Eid, and S. Del Gobbo, Planar heterojunction perovskite solar cell based on CdS electron transport layer. Thin Solid Films (2017). https://doi.org/10.1016/j.tsf.2017.07.003.10.1016/j.tsf.2017.07.003 ↗
50. S. Chander and M.S. Dhaka, Optimization of substrates and physical properties of CdS thin films for perovskite solar cell applications. J. Mater. Sci. Mater. Electron. (2017). https://doi.org/10.1007/s10854-017-6384-x.10.1007/s10854-017-6384-x ↗
51. R. Ranjan, A. Kumar, N. Bhardwaj, A.K. Atul, R.N. Tiwari, A.K. Sharma, and N. Srivastava, Impact of tin-based perovskite as a hole transport layer on the device performance of stable and 27.10% efficient CdTe-based solar cell by numerical simulation. J. Phys. Chem. Solids. (2023). https://doi.org/10.1016/j.jpcs.2023.111546.10.1016/j.jpcs.2023.111546 ↗