Dynamic Energy Conversion Performance of Wearable Annular Thermoelectric Generators for Harvesting Human Body Heat
Source abstract
Abstract
A thermodynamic model of a skin-wearable annular thermoelectric generator (WATEG) system for harvesting human body heat is developed. The human skin is recognized as a three-layer structure, consisting of the subcutis layer, the dermis, and the epidermis. The heat exchange caused by blood perfusion and metabolic heat generation within skin tissue are taken into account using dual-phase-lag (DPL) bioheat conduction theory. Based on the maximum power density, the matched external load resistance, optimal fill factor, and optimal configuration dimensions of thermoelectric semiconductors and fin heat sink are provided through the numerical results. Additionally, the dynamic thermal responses of the WATEGs under various convective heat dissipation conditions at heat sink which occur during physical activities of the human body such as walking, jogging, and sprinting are also studied. The influence of metabolic heat generation within skin tissue is found to be relatively small and can be disregarded. However, neglecting blood perfusion results in a significant underestimation by approximately 30% in the steady-state energy conversion performance of the WATEG. The optimal fin height for achieving the maximum power density per unit mass of the aluminum-based heat sink is identified, and it is established at 10 mm, aligning with a heat convection coefficient of 10 W/m2 K. The analytical model developed in this paper proves to be highly beneficial in the design and fabrication of actual WATEGs used for self-powered wearable microelectronic devices. ; The research was supported by the Natural Science Foundation of Ningbo (2022J095), the Natural Science Foundation of Henan Province (232300420336), and the Key University Scientific Research Project of Henan Province (22A610007).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Innovative Energy Harvesting Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. C. Linghu, S. Zhang, C. Wang, and J. Song, Transfer printing techniques for flexible and stretchable inorganic electronics. npj. Flex. Electron. 2(1), 26 (2018).10.1038/s41528-018-0037-x ↗
2. H. Jouhara, A. Żabnieńska-Góra, N. Khordehgah, Q. Doraghi, L. Ahmad, L. Norman, and S. Dai, Thermoelectric generator (TEG) technologies and applications. Int. J. Thermofluids. 9, 100063 (2021).10.1016/j.ijft.2021.100063 ↗
3. J.A. Paradiso and T. Starner, Energy scavenging for mobile and wireless electronics. IEEE Perv. Comput. 4(1), 18 (2005).10.1109/MPRV.2005.9 ↗
4. A.R.M. Siddique, S. Mahmud, and B. Van Heyst, A review of the state of the science on wearable thermoelectric power generators (TEGs) and their existing challenges. Renew. Sust. Energ. Rev. 73, 730 (2017).10.1016/j.rser.2017.01.177 ↗
5. C. Guo, A. Zhang, D. Pang, and J. Cao, Energy conversion performance and optimization of wearable annular thermoelectric generators. J. Electron. Mater. 52(11), 7325 (2023).10.1007/s11664-023-10636-y ↗
6. A. Zhang, D. Pang, J. Lou, J. Wang, and W.M. Huang, An analytical model for wearable thermoelectric generators harvesting body heat: an opportunistic approach. App. Therm. Eng. 236, 121658 (2024).10.1016/j.applthermaleng.2023.121658 ↗
7. V. Leonov and R.J.M. Vullers, Wearable electronics self-powered by using human body heat: the state of the art and the perspective. J. Renew. Sustain. Ener. 1(6), 062701 (2009).10.1063/1.3255465 ↗
8. M. Kishi, H. Nemoto, T. Hamao, M. Yamamoto, S. Sudou, M. Mandai, and S. Yamamoto, Micro thermoelectric modules and their application to wristwatches as an energy source. 1999 Eighteenth International Conference on Thermoelectrics (1999), p. 301
9. Y.G. Lee, J. Kim, M.S. Kang, S.H. Baek, S.K. Kim, S.M. Lee, J. Lee, D.B. Hyun, B.K. Ju, S.E. Moon, J.S. Kim, and B. Kwon, Design and experimental investigation of thermoelectric generators for wearable applications. Adv. Mater. Technol. 2(7), 1600292 (2017).10.1002/admt.201600292 ↗
10. M. Sattar and W.H. Yeo, Recent advances in materials for wearable thermoelectric generators and biosensing devices. Materials 15(12), 4315 (2022).10.3390/ma15124315 ↗
11. Q. Wu and J. Hu, A novel design for a wearable thermoelectric generator based on 3D fabric structure. Smart Mater. Struct. 26(4), 045037 (2017).10.1088/1361-665X/aa5694 ↗
12. H. Li, Y. Xu, X. Li, Y. Chen, Y. Jiang, C. Zhang, B. Lu, J. Wang, Y. Ma, Y. Chen, Y. Huang, M. Ding, H. Su, G. Song, Y. Luo, and X. Feng, Epidermal inorganic optoelectronics for blood oxygen measurement. Adv. Healthc. Mater. 6(9), 1601013 (2017).10.1002/adhm.201601013 ↗
13. H. Liu, Y. Wang, D. Mei, Y. Shi, and Z. Chen, Design of a wearable thermoelectric generator for harvesting human body energy. Wear. Sens. Robots: Proc. Int. Conf. Wear. Sens Robots 2017, 55 (2015).
14. T. Sun, L. Wang, and W. Jiang, Pushing thermoelectric generators toward energy harvesting from the human body: challenges and strategies. Mater. Today 57, 121 (2022).10.1016/j.mattod.2022.06.001 ↗
15. P. Webb, Temperatures of skin, subcutaneous tissue, muscle and core in resting men in cold, comfortable and hot conditions. Eur. J. Appl. Physiol. Occup. Physiol. 64, 471 (1992).10.1007/BF00625070 ↗
16. H.H. Pennes, Analysis of tissue and arterial blood temperatures in the resting human forearm. J. Appl. Physiol. 1(2), 93 (1948).10.1152/jappl.1948.1.2.93 ↗
17. A. Zhang, J. Wang, and B. Wang, Bio-thermo-viscoelastic behavior in multilayer skin tissue. J. Therm. Stresses 45(7), 559 (2022).10.1080/01495739.2022.2073932 ↗
18. F. Xu, K.A. Seffen, and T.J. Lu, Non-Fourier analysis of skin biothermomechanics. Int. J. Heat Mass Transf. 51(9–10), 2237 (2008).10.1016/j.ijheatmasstransfer.2007.10.024 ↗
19. A. Zhang, G. Li, B. Wang, and J. Wang, A theoretical model for wearable thermoelectric generators considering the effect of human skin. J. Electron. Mater. 50, 1514 (2021).10.1007/s11664-020-08695-6 ↗
20. F. Suarez, A. Nozariasbmarz, D. Vashaee, and M.C. Öztürk, Designing thermoelectric generators for self-powered wearable electronics. Energy Environ. Sci. 9(6), 2099 (2016).10.1039/C6EE00456C ↗
21. A. Nozariasbmarz, H. Collins, K. Dsouza, M.H. Polash, M. Hosseini, M. Hyland, J. Liu, A. Malhotra, F.M. Ortiz, F. Mohaddes, V.P. Ramesh, Y. Sargolzaeiaval, N. Snouwaert, M.C. Özturk, and D. Vashaee, Review of wearable thermoelectric energy harvesting: from body temperature to electronic systems. Appl. Energy 258, 114069 (2020).10.1016/j.apenergy.2019.114069 ↗
22. H. Park, Y. Eom, D. Lee, J. Kim, G. Park, and W. Kim, High power output based on watch-strap-shaped body heat harvester using bulk thermoelectric materials. Energy 187, 115935 (2019).10.1016/j.energy.2019.115935 ↗
23. D. Lee, H. Park, G. Park, J. Kim, H. Kim, H. Cho, S. Han, and W. Kim, Liquid-metal-electrode-based compact, flexible, and high-power thermoelectric device. Energy 188, 116019 (2019).10.1016/j.energy.2019.116019 ↗
24. P.J. Antaki, New interpretation of non-Fourier heat conduction in processed meat. J. Heat Transf. 127(2), 189 (2005).10.1115/1.1844540 ↗
25. D.Y. Tzou, A unified field approach for heat conduction from macro- to micro-scales. J. Heat Transf. 117, 8 (1995).10.1115/1.2822329 ↗
26. Y. Li, J. Zhang, Y. Xing, and J. Song, Thermal analysis of epidermal electronic devices integrated with human skin considering the effects of interfacial thermal resistance. AIP Adv. 8(5), 055102 (2018).10.1063/1.5029505 ↗
27. Y. Yin, M. Li, Y. Li, and J. Song, Skin pain sensation of epidermal electronic device/skin system considering non-Fourier heat conduction. J. Mech. Phys. Solids 138, 103927 (2020).10.1016/j.jmps.2020.103927 ↗
28. J. Ma, Y. Sun, and J. Yang, Analytical solution of dual-phase-lag heat conduction in a finite medium subjected to a moving heat source. Int. J. Therm. Sci. 125, 34 (2018).10.1016/j.ijthermalsci.2017.11.005 ↗
29. T. Saeed and L. Abbas, Finite element analyses of nonlinear DPL bioheat model in spherical tissues using experimental data. Mech. Based Des. Struct. Mech. 50(4), 1287 (2022).10.1080/15397734.2020.1749068 ↗
30. R.K. Chaudhary, D. Kumar, K.N. Rai, and J. Singh, Analysis of thermal injuries using classical Fourier and DPL models for multi-layer of skin under different boundary conditions. Int. J. Biomath. 14(6), 2150040 (2021).10.1142/S1793524521500406 ↗
31. J. Ma, X. Yang, Y. Sun, and J. Yang, Theoretical investigation on the thermo-mechanical responses of the human skin during thermal therapy. Int. J. Mech. Sci. 105041, 161 (2019).
32. K.C. Liu and H.T. Chen, Investigation for the dual phase lag behavior of bio-heat transfer. Int. J. Therm. Sci. 49(7), 1138 (2010).10.1016/j.ijthermalsci.2010.02.007 ↗
33. A. Zhang, G. Li, B. Wang, J. Wang, and J. Du, Analytical solutions of thermomechanical responses in skin tissue for hyperthermia treatment. Int. Commun. Heat Mass Transf. 140, 106521 (2023).10.1016/j.icheatmasstransfer.2022.106521 ↗
34. D. Kumar, S. Singh, and K.N. Rai, Analysis of classical Fourier, SPL, and DPL heat transfer model in biological tissues in presence of metabolic and external heat source. Int. J. Biomath. 52, 1089 (2015).
35. J. Zhou, J.K. Chen, and Y. Zhang, Dual-phase lag effects on thermal damage to biological tissues caused by laser irradiation. Comput. Biol. Med. 39(3), 286 (2009).10.1016/j.compbiomed.2009.01.002 ↗
36. M.N. Hasan, M.Y.B. Hashem, M.A. Siddique, M.A.M. Yunus, and M.S.M. Ali, Finite element analysis of thermoelectric power generation from human wrist. ISIEA.IEEE (2021). p. 110.1109/ISIEA51897.2021.9510000 ↗
37. J. Yuan and R. Zhu, A fully self-powered wearable monitoring system with systematically optimized flexible thermoelectric generator. Appl. Energy 271, 115250 (2020).10.1016/j.apenergy.2020.115250 ↗
38. A. Bauknecht, T. Steinert, C. Spengler, and G. Suck, Analysis of annular thermoelectric couples with nonuniform temperature distribution by means of 3-D multiphysics simulation. J. Electron. Mater. 42, 1641 (2013).10.1007/s11664-012-2360-7 ↗
39. Z.G. Shen, S.Y. Wu, and L. Xiao, Theoretical analysis on the performance of annular thermoelectric couple. Energy Conv. Manag. 89, 244 (2015).10.1016/j.enconman.2014.09.071 ↗
40. A.B. Zhang, B.L. Wang, D.D. Pang, L.W. He, J. Lou, J. Wang, and J.K. Du, Effects of interface layers on the performance of annular thermoelectric generators. Energy 147, 612 (2018).10.1016/j.energy.2018.01.098 ↗
41. A.B. Zhang, B.L. Wang, D.D. Pang, J.B. Chen, J. Wang, and J.K. Du, Influence of leg geometry configuration and contact resistance on the performance of annular thermoelectric generators. Energy Conv. Manag. 166, 337 (2018).10.1016/j.enconman.2018.04.042 ↗
42. S. Fan and Y. Gao, Numerical simulation on thermoelectric and mechanical performance of annular thermoelectric generator. Energy 150, 38 (2018).10.1016/j.energy.2018.02.124 ↗
43. Z.F. Wen, Y. Sun, A.B. Zhang, B.L. Wang, J. Wang, and J.K. Du, Performance analysis of a segmented annular thermoelectric generator. J. Electron. Mater. 49, 4830 (2020).10.1007/s11664-020-08208-5 ↗
44. S.C. Kaushik and S. Manikandan, The influence of Thomson effect in the energy and exergy efficiency of an annular thermoelectric generator. Energy Conv. Manag. 103, 200 (2015).10.1016/j.enconman.2015.06.037 ↗
45. Z. Weng, F. Liu, W. Zhu, Y. Li, C. Xie, J. Deng, and L. Huang, Performance improvement of variable-angle annular thermoelectric generators considering different boundary conditions. Appl. Energy 306, 118005 (2022).10.1016/j.apenergy.2021.118005 ↗
46. B. Huang and Z.G. Shen, Performance assessment of annular thermoelectric generators for automobile exhaust waste heat recovery. Energy 246, 123375 (2022).10.1016/j.energy.2022.123375 ↗
47. N. Kuang, Z. Zuo, W. Wang, R. Liu, and Z. Zhao, Optimized thermoelectric properties and geometry parameters of annular thin-film thermoelectric generators using n-type Bi2Te2.7Se0.3 and p-type Bi0.5Sb1.5Te3 thin films for energy harvesting. Sens. Actuator A-Phys. 332, 113030 (2021).10.1016/j.sna.2021.113030 ↗
48. H.N. Ho and L.A. Jones, Modeling the thermal responses of the skin surface during hand object interactions. J. Biomech. Eng. ASME. 130, 021005 (2008).10.1115/1.2899574 ↗
49. B. Saggin, M. Tarabini, and G. Lanfranchi, A device for the skin-contact thermal resistance measurement. IEEE Trans. Instrum. Meas. 61(2), 489 (2012).10.1109/TIM.2011.2169179 ↗
50. D.W. Hahn and M.N. Özisik, Heat Conduction (Hoboken: John, 2012).10.1002/9781118411285 ↗
51. J. Zhang, Y. Li, and Y. Xing, Theoretical and experimental investigations of transient thermo-mechanical analysis on flexible electronic devices. Int. J. Mech. Sci. 160, 192 (2019).10.1016/j.ijmecsci.2019.04.041 ↗
52. A. Zhang, D. Pang, B. Wang, and J. Wang, Dynamic responses of wearable thermoelectric generators used for skin waste heat harvesting. Energy 262, 125621 (2023).10.1016/j.energy.2022.125621 ↗
53. A. Alkhwaji, B. Vick, and T. Diller, New mathematical model to estimate tissue blood perfusion, thermal contact resistance and core temperature. ASME. J Biomech Eng. 134(8), 081004 (2012).10.1115/1.4007093 ↗
54. F. Xu, T.J. Lu, and K.A. Seffen, Biothermomechanics of skin tissues. J. Mech. Phys. Solids 56(5), 1852 (2008).10.1016/j.jmps.2007.11.011 ↗
55. F.P. Incropera, D.P. Dewitt, T.L. Bergman, and A.S. Lavine, Fundamentals of Heat and Mass Transfer (New York: Wiley, 1996).
56. Y. Shi, X. Lü, Q. Xiang, J. Li, X. Shao, and M. Bao, Stretchable thermoelectric generator for wearable power source and temperature detection applications. Energy Conv. Manag. 253, 115167 (2022).10.1016/j.enconman.2021.115167 ↗
57. A. Narjis, C.T. Liang, H. El Aakib, A. Tchenka, and A. Outzourhit, Design optimization for maximized thermoelectric generator performance. J. Electron. Mater. 49, 306 (2020).10.1007/s11664-019-07748-9 ↗
58. H. Cai, L. Su, Y. Liao, and Z. Weng, Numerical and experimental study on the influence of top bypass flow on the performance of plate fin heat exchanger. Appl. Therm. Eng. 146, 356 (2019).10.1016/j.applthermaleng.2018.10.007 ↗
59. K.S. Ong, C.F. Tan, K.C. Lai, and K.H. Tan, Heat spreading and heat transfer coefficient with fin heat sink. Appl. Therm. Eng. 09, 161 (2016).
60. B. Hejrati, A.S. Merryweather, and J.J. Abbott, Generating arm-swing trajectories in real-time using a data-driven model for gait rehabilitation with self-selected speed. IEEE Trans. Neural Syst. Rehabil. Eng. 26(1), 115 (2018).10.1109/TNSRE.2017.2740060 ↗