Nickel Doping Effects on the Structural and Dielectric Properties of Ba(Zn1/3Nb2/3)O3 Perovskite Ceramics
Source abstract
Abstract
The effects of nickel doping into Ba(Zn1/3Nb2/3)O3 (acronym: BZN) ceramics is structurally, morphologically and electrically investigated. The nickel substitution in sites of Zn which was carried out by the solid state reaction technique strongly enhanced the structural, morphological and electrical performances of the BZN. Specifically, while the lattice constant and crystallite sizes increased, the microstrain and the defect density decreased. The relative density of the BZN ceramics increased from 95.40% to 98.24% upon doping of Ni with content of x = 0.05. In addition, the Ni doping increased the values of electrical conductivity without significant changes in the dielectric constant values. It is also observed that the doping the BZN ceramics highly altered the temperature dependent variation of the relative dielectric constant. In the temperature range of 293–473 K, the x = 0.05 Ni doped BZN samples were less sensitive to temperature. The dynamics of the temperature dependent dielectric response is dominated by the coupled defects excitation mechanisms. Both of the temperatures and frequency dependent dielectric constant, dielectric loss and electrical conductivity suggests that the Ni doped Ba(Zn1/3Nb2/3)O3 ceramics is more appropriate for electronic device fabrication than the pure ones.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. L. Jin, W. Luo, R. Jing, J. Qiao, J. Pang, H. Du, L. Zhang, Y. Tian, G. Liu, and Y. Yan, L. Jin, W. Luo, R. Jing, J. Qiao, J. Pang, H. Du, L. Zhang, Y. Tian, G. Liu, and Y. Yan, Ceram. Int., 2019, 45, p 5518.10.1016/j.ceramint.2018.12.009 ↗
2. X. Cui, L. Liu, H. Li, F. Liu, L. Cheng, and S. Liu, X. Cui, L. Liu, H. Li, F. Liu, L. Cheng, and S. Liu, Mater. Res. Expr., 2020, 7, p 016306.10.1088/2053-1591/ab61a3 ↗
3. A. Belous, F. Oleksandr, S. Solopan, P. Maksym, and Z. Igor, J. Magn. Magn. Mater., 166691 (2020).10.1016/j.jmmm.2020.166691 ↗
4. V. Khopkar, and B. Sahoo, V. Khopkar, and B. Sahoo, Phys. Chem. Chem. Phys., 2020, 22, p 2986.10.1039/C9CP05707B ↗
5. Sh. Matteppanavar, S. Rayaprol, B. Angadi, and B. Sahoo, Sh. Matteppanavar, S. Rayaprol, B. Angadi, and B. Sahoo, J. Alloys Compd., 2016, 677, p 27.10.1016/j.jallcom.2016.03.260 ↗
6. S. Matteppanavar, I. Shivaraja, S. Rayaprol, B. Angadi, and B. Sahoo, S. Matteppanavar, I. Shivaraja, S. Rayaprol, B. Angadi, and B. Sahoo, J. Supercond. Nov. Magnt., 2017, 30, p 1317.10.1007/s10948-016-3928-x ↗
7. S. Matteppanavar, S. Rayaprol, A.V. Anupama, B. Angadi, and B. Sahoo, S. Matteppanavar, S. Rayaprol, A.V. Anupama, B. Angadi, and B. Sahoo, Ceram. Int., 2015, 41, p 11680.10.1016/j.ceramint.2015.05.131 ↗
8. S. Matteppanavar, S. Rayaprol, A.V. Anupama, B. Sahoo, and B. Angadi, S. Matteppanavar, S. Rayaprol, A.V. Anupama, B. Sahoo, and B. Angadi, J. Supercond. Nov. Magnt., 2015, 28, p 2465.10.1007/s10948-015-3058-x ↗
9. S. Matteppanavar, S. Rayaprol, K. Singh, V.R. Reddy, and B. Angadi, S. Matteppanavar, S. Rayaprol, K. Singh, V.R. Reddy, and B. Angadi, J. Mater. Sci., 2015, 50, p 4980.10.1007/s10853-015-9046-5 ↗
10. R. Mittal, A. K. Chauhan, and R. Mukhopadhyay, Solid state physics: proceedings of the 56th DAE solid state physics symposium 2011. AIPC 1447 (2012).10.1063/1.4709859 ↗
11. C. Li, Bin Yang, S.-T. Zhang, Y.-N. Hong, D.-Q. Liu, R. Zhang, G. Shuo, and W.-W. Cao, J. Mater. Sci.: Mater. Electron. 1 (2020).
12. H. S. Mohanty, Ashok Kumar, Balaram Sahoo, Pawan Kumar Kurliya, and Dillip K. Pradhan, J. Mater. Sci.: Mater. Electron. 29, 6966 (2018).
13. S. Madolappa, A.V. Anupama, P.W. Jaschin, K.B.R. Varma, and B. Sahoo, S. Madolappa, A.V. Anupama, P.W. Jaschin, K.B.R. Varma, and B. Sahoo, Bull. Mater. Sci., 2016, 39, p 593.10.1007/s12034-016-1176-0 ↗
14. X. Zhong, Ch. Zhang, F. Chen, Z. Tang, J.I.A.N. Gang, and T. Nonferr, X. Zhong, Ch. Zhang, F. Chen, Z. Tang, J.I.A.N. Gang, and T. Nonferr, Metal Soc., 2020, 30, p 756.
15. Q. Wei, M. Zhu, M. Zheng, and Y. Hou, Q. Wei, M. Zhu, M. Zheng, and Y. Hou, J. Alloys Compd., 2019, 782, p 611.10.1016/j.jallcom.2018.12.210 ↗
16. M. Huang, X. Yang, and F. Jiang, M. Huang, X. Yang, and F. Jiang, Mater. Res. Expr., 2018, 5, p 066301.10.1088/2053-1591/aac806 ↗
17. X. Yang, Hongya Wu, X. Wang, Y. Luo, and L. Li, J. Alloys Compd. 723, 930 (2017).
18. A.F. Qasrawi, E.İ Sahin, M. Emek, M. Kartal, and S. Kargin, A.F. Qasrawi, E.İ Sahin, M. Emek, M. Kartal, and S. Kargin, Mater. Res. Expr., 2019, 6, p 095095.10.1088/2053-1591/ab32d6 ↗
19. A.F. Qasrawi, R.R.N. Kmail, A. Mergen, and S. Genc, A.F. Qasrawi, R.R.N. Kmail, A. Mergen, and S. Genc, J. Electroceram., 2016, 37, p 8.10.1007/s10832-015-0012-z ↗
20. M.R. Varma, and M.T. Sebastian, M.R. Varma, and M.T. Sebastian, J. Eur. Ceram. Soc., 2007, 27, p 2827.10.1016/j.jeurceramsoc.2006.11.014 ↗
21. H. Zhang, T. Ji, L. Li, X. Qi, Y. Liu, J. Cai, H. Du, and J. Sun, H. Zhang, T. Ji, L. Li, X. Qi, Y. Liu, J. Cai, H. Du, and J. Sun, Acta. Phys. Sin., 2008, 24, p 607.10.1016/S1872-1508(08)60027-3 ↗
22. S.J. Huang, Y.B. Xiao, J.L. Liu, Y. Ji, L.Y. Mao, and W.C. Wang, S.J. Huang, Y.B. Xiao, J.L. Liu, Y. Ji, L.Y. Mao, and W.C. Wang, J. Non-Cryst. Solids, 2019, 518, p 10.10.1016/j.jnoncrysol.2019.05.008 ↗
23. G. Zhang, and B. Evans, G. Zhang, and B. Evans, Adv. Mater. Phys. Chem., 2012, 2, p 169.10.4236/ampc.2012.24B044 ↗
24. M. Xiao, S. He, J. Meng, and P. Zhang, M. Xiao, S. He, J. Meng, and P. Zhang, Mater. Chem. Phys., 2020, 242, p 122412.10.1016/j.matchemphys.2019.122412 ↗
25. S.D. Singh, A.K. Poswal, C. Kamal, P. Rajput, A. Chakrabarti, S.N. Jha, and T. Ganguli, S.D. Singh, A.K. Poswal, C. Kamal, P. Rajput, A. Chakrabarti, S.N. Jha, and T. Ganguli, Solid State Commun., 2017, 259, p 40.10.1016/j.ssc.2017.05.002 ↗
26. B. Show, N. Mukherjee, and A. Mondal, B. Show, N. Mukherjee, and A. Mondal, RSC Adv., 2016, 6, p 75347.10.1039/C6RA13385A ↗
27. M. Lafont, L.F. Juarez, and C. Vahlas, M. Lafont, L.F. Juarez, and C. Vahlas, Scr. Mater., 2004, 51, p 699.10.1016/j.scriptamat.2004.06.010 ↗
28. C. Kaliyaperumal, A. Sankarakumar, and T. Paramasivam, C. Kaliyaperumal, A. Sankarakumar, and T. Paramasivam, J. Alloys Compd., 2020, 813, p 152221.10.1016/j.jallcom.2019.152221 ↗
29. A.F. Qasrawi, and T.S. Kayed, A.F. Qasrawi, and T.S. Kayed, and Filiz Ercan Solid Stat. Commun., 2011, 151, p 615.10.1016/j.ssc.2011.02.001 ↗
30. M. Kul, M. Zor, A.S. Aybek, S. Irmak, and E. Turan, M. Kul, M. Zor, A.S. Aybek, S. Irmak, and E. Turan, Sol. Energy Mater. Sol. Cells, 2007, 91, p 882.10.1016/j.solmat.2007.01.020 ↗
31. H. Noor, N. Tariq, N. Iqbal, S. Riazand, and S. Naseem in The 2016 world congress on Advances in civil, environment, and Mater. Res. (ACEM16), Jeju Island, Korea, August 28–September 1, 2016.
32. H.S. Mohanty, T. Dam, H. Borkar, A. Kumar, K.K. Mishra, S. Sen, B. Behera, B. Sahoo, and D.K. Pradhan, H.S. Mohanty, T. Dam, H. Borkar, A. Kumar, K.K. Mishra, S. Sen, B. Behera, B. Sahoo, and D.K. Pradhan, Ferroelectrics, 2017, 517, p 25.10.1080/00150193.2017.1369824 ↗
33. D. Shihua, Y. Xi, and Y. Yong, D. Shihua, Y. Xi, and Y. Yong, Ceram. Int., 2004, 30, p 1195.10.1016/j.ceramint.2003.12.030 ↗
34. A. Mergen, and E. Korkmaz, A. Mergen, and E. Korkmaz, J. Euro. Ceram. Soc., 2011, 31, p 2649.10.1016/j.jeurceramsoc.2011.01.012 ↗