An EBSD Study of Fatigue Crack Propagation in Bonded Aluminum Wires Cycled from 55°C to 85°C
Source abstract
Abstract
The texture and microstructure evolution of aluminum (Al) wire bonds of power semiconductor devices during power cycling tests were investigated using electron backscatter diffraction (EBSD). Power cycling tests in pulse width modulation (PWM) mode were performed on power modules during which the cycled devices were extracted from the test bench at different stages of the aging for analysis. The results improve our understanding of microstructural transition after wire bonding and during power cycling. After the wire was subjected to an ultrasonic bonding process, the evolution of a distinct brass textured area within the bonded interface was observed by EBSD analysis. The brass texture is discussed as a result of plastic deformation. During power cycling, grain coarsening as well as local low angle boundary conversion to high angle boundary occurs and the wire–metallization interface texture changes to an overall random orientation. Effects of microstructure and texture on the crack initiation and propagation are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. J.E. Krzanowski and N. Murdeshwar, Deformation and Bonding Processes in Aluminum Ultrasonic Wire Wedge Bonding. J. Electron. Mater. 19, 919 (1990)10.1007/BF02652917 ↗
2. B. Czerny and G. Khatibi, Cyclic Robustness of Heavy Wire Bonds: Al, AlMg, Cu and Cucoral. Microelectron. Reliab. 88, 745 (2018)10.1016/j.microrel.2018.07.003 ↗
3. N. Dornic, A. Ibrahim, Z. Khatir, S.H. Tran, J.P. Ousten, J. Ewanchuk, and S. Mollov, Analysis of the Degradation Mechanisms Occurring in the Topside Interconnections of IGBT Power Devices During Power Cycling. Microelectron. Reliab. 88, 462 (2018)10.1016/j.microrel.2018.07.041 ↗
4. B. Czerny and G. Khatibi, Interface Reliability and Lifetime Prediction of Heavy Aluminum Wire Bonds. Microelectron. Reliab. 58, 65 (2016)10.1016/j.microrel.2015.11.028 ↗
5. G. Khatibi, M. Lederer, B. Weiss, T. Licht, J. Bernardi, and H. Danninger, Accelerated Mechanical Fatigue Testing and Lifetime of Interconnects in Microelectronics. Procedia Eng. 2, 511 (2010)10.1016/j.proeng.2010.03.055 ↗
6. N. Dornic, A. Ibrahim, Z. Khatir, N. Degrenne, S. Mollov, and D. Ingrosso, Analysis of the Aging Mechanism Occurring at the Bond-Wire Contact of IGBT Power Devices During Power Cycling. Microelectron. Reliab. 114, 113 (2020)10.1016/j.microrel.2020.113873 ↗
7. F. Naumann, J. Schischka, S. Koetter, E. Milke, and M. Petzold, in 2012 4th Electronic System-Integration Technology Conference (IEEE, 2012), p. 1
8. E. Arjmand, P.A. Agyakwa, and C.M. Johnson, Reliability of Thick Al Wire: A Study of the Effects of Wire Bonding Parameters on Thermal Cycling Degradation Rate Using Non-destructive Methods. Microelectron. Reliab. 54, 2006 (2014)10.1016/j.microrel.2014.07.119 ↗
9. P. Hurley and F. Humphreys, The Application of EBSD to the Study of Substructural Development in a Cold Rolled Single-Phase Aluminium Alloy. Acta Mater. 51, 1087 (2003)10.1016/S1359-6454(02)00513-X ↗
10. Ö. Tüzün, J.M. Auger, I. Gordon, A. Focsa, P. Montgomery, C. Maurice, A. Slaoui, G. Beaucarne, and J. Poortmans, EBSD Analysis of Polysilicon Films Formed by Aluminium Induced Crystallization of Amorphous Silicon. Thin Solid Films 516, 6882 (2008)10.1016/j.tsf.2007.12.105 ↗
11. A. Deshpande, A. Tofangchi, and K. Hsu, Microstructure Evolution of Al6061 and Copper During Ultrasonic Energy Assisted Compression. Mater. Charact. 153, 240 (2019)10.1016/j.matchar.2019.05.005 ↗
12. M.S. Broll, U. Geissler, J. Höfer, S. Schmitz, O. Wittler, and K.D. Lang, Microstructural Evolution of Ultrasonic-Bonded Aluminum Wires. Microelectron. Reliab. 55, 961 (2015)10.1016/j.microrel.2015.03.002 ↗
13. B. Czerny and G. Khatibi, Accelerated Mechanical Fatigue Interconnect Testing Method for Electrical Wire Bonds. tm-Technisches Messen 85, 213 (2018)10.1515/teme-2017-0131 ↗
14. W.S. Loh, M. Corfield, H. Lu, S. Hogg, T. Tilford, and C.M. Johnson, in 2007 International Conference on Thermal, Mechanical and Multi-Physics Simulation Experiments in Microelectronics and Micro-systems. EuroSime 2007 (IEEE, 2007), p. 1
15. G. Khatibi, B. Weiss, J. Bernardi, and S. Schwarz, Microstructural Investigation of Interfacial Features in Al Wire Bonds. J. Electron. Mater. 41, 3436 (2012)10.1007/s11664-012-2215-2 ↗
16. J. Goehre, U. Geissler, M. Schneider-Ramelow, and K.D. Lang, in 2012 7th International Conference on Integrated Power Electronics Systems (CIPS) (IEEE, 2012), p. 1
17. B. Beausir and J. Fundenberger, Analysis Tools for Electron and X-ray Diffraction. ATEX-Software, https://www.atex-software.eu, Université de Lorraine-Metz (2017)
18. P.A. Agyakwa, L. Yang, E. Arjmand, P. Evans, M.R. Corfield, and C.M. Johnson, Damage Evolution in Al Wire Bonds Subjected to a Junction Temperature Fluctuation of 30 k. J. Electron. Mater. 45, 3659 (2016)10.1007/s11664-016-4519-0 ↗
19. V. Popok, S. Buhrkal-Donau, B. Czerny, G. Khatibi, H. Luo, F. Iannuzzo, and K. Pedersen, Comparative Study of Wire Bond Degradation Under Power and Mechanical Accelerated Tests. J. Mater. Sci. Mater. Electron. 30, 17040 (2019)10.1007/s10854-019-02050-0 ↗
20. C. Kaestle and J. Franke, in 2014 International Conference on Electronics Packaging (ICEP) (IEEE, 2014), p. 33510.1109/ICEP.2014.6826706 ↗
21. S. Park, S. Nagao, T. Sugahara, and K. Suganuma, Heel Crack Propagation Mechanism of Cold-Rolled Cu/Al Clad Ribbon Bonding in Harsh Environment. J. Mater. Sci. Mater. Electron. 26, 7277 (2015)10.1007/s10854-015-3355-y ↗
22. M.D. Sangid, The Physics of Fatigue Crack Initiation. Int. J. Fatigue 57, 58 (2013). (Fatigue and Microstructure: A Special Issue on Recent Advances)10.1016/j.ijfatigue.2012.10.009 ↗
23. R. Kumar, A. Gupta, A. Kumar, R. Chouhan, and R.K. Khatirkar, Microstructure and Texture Development During Deformation and Recrystallisation in Strip Cast AA8011 Aluminum Alloy. J. Alloys Compd. 742, 369 (2018)10.1016/j.jallcom.2018.01.280 ↗
24. I. Samajdar, B. Verlinden, L. Kestens, and P. Van Houtte, Physical Parameters Related to the Developments of Recrystallization Textures in an Ultra Low Carbon Steel. Acta Mater. 47, 55 (1998)10.1016/S1359-6454(98)00337-1 ↗
25. A. Ridha and W. Hutchinson, Recrystallisation Mechanisms and the Origin of Cube Texture in Copper. Acta Metall. 30, 1929 (1982)10.1016/0001-6160(82)90033-5 ↗
26. R. Kumar, A. Gupta, T.R. Dandekar, and R.K. Khatirkar, Microstructure and Texture Development in AA3003 Aluminium Alloy. Mater. Today Commun. 24, 100965 (2020)10.1016/j.mtcomm.2020.100965 ↗
27. K. Lücke, R. Rixen, and M. Senna, Formation of Recrystallization Textures in Rolled Aluminum Single Crystals. Acta Metall. 24, 103 (1976)10.1016/0001-6160(76)90012-2 ↗
28. P.A. Agyakwa, M.R. Corfield, L. Yang, J. Li, V. Marques, and C.M. Johnson, Microstructural Evolution of Ultrasonically Bonded High Purity Al Wire During Extended Range Thermal Cycling. Microelectron. Reliab. 51, 406 (2011)10.1016/j.microrel.2010.08.018 ↗
29. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J.J. Jonas, Dynamic and Post-dynamic Recrystallization Under Hot, Cold and Severe Plastic Deformation Conditions. Prog. Mater Sci. 60, 130 (2014)10.1016/j.pmatsci.2013.09.002 ↗
30. S. Rahimi, B. Wynne, and T. Baker, Development of Microstructure and Crystallographic Texture in a Double-Sided Friction Stir Welded Microalloyed Steel. Metall. Mater. Trans. A. 48, 362 (2017)10.1007/s11661-016-3833-8 ↗