journal article·2020-12

Compact Titania Films by Spray Pyrolysis for Application as ETL in Perovskite Solar Cells

Sooraj Kumar, Asim Aftab, Md. Imteyaz Ahmad

Journal of Electronic Materials· Volume 49· Issue 12
Publisher page

Abstract

Hybrid perovskite-based solar cells are projected as a potentially viable photovoltaic (PV) technology for large-scale implementation. The electron transport layer (ETL) should be dense and pinhole-free to facilitate efficient electron collection and transport from the perovskite layer to the anode, which is very important for achieving high-performance solar cells. In this study, a compact TiO2 layer was synthesized by a scalable spray pyrolysis technique. The effect of deposition temperature on the transparency, microstructure, and bandgap of c-TiO2 film was studied. Pinhole-free nanocrystalline films having > 85% transparency with uniform coverage was obtained on spray pyrolysis at 400°C and annealing at 450°C. Usability of the deposited films as ETL in perovskite solar cells was tested by fabricating solar cells (FTO/c-TiO2/FA0.85MA0.15Pb(I0.85Br0.15)3/CuSCN/Au) using the deposited films and comparing their performance. Cell efficiency close to 11.75% with a fill factor of 69% was obtained in the cell fabricated using the films deposited at 400°C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. NREL National Renewable Energy Laboratory, NREL Efficiency chart, http://Www.Nrel.Gov/Ncpv. (2015). http://www.nrel.gov/ncpv/images/efficiency_chart.jpg.
2. A. Elumalai, N. Mahmud, M. Wang, and D. Uddin, Energies 9, 861 (2016). https://doi.org/10.3390/en9110861.10.3390/en9110861 ↗
3. G. Das, S. Gu, C.M. Joshi, P.C. Yang, B. Aytug, T. Rouleau, D.B. Geohegan, and K. Xiao, J. Mater. Chem. A 4, 9685–9690 (2016). https://doi.org/10.1039/C6TA02105K.10.1039/C6TA02105K ↗
4. Z. Li, T.R. Klein, D.H. Kim, M. Yang, J.J. Berry, M.F.A.M. van Hest, and K. Zhu, Nat. Rev. Mater. 3, 18017 (2018). https://doi.org/10.1038/natrevmats.2018.17.10.1038/natrevmats.2018.17 ↗
5. Q. Jiang, L. Zhang, H. Wang, X. Yang, J. Meng, H. Liu, Z. Yin, J. Wu, X. Zhang, and J. You, Nat. Energy. 2, 16177 (2017). https://doi.org/10.1038/nenergy.2016.177.10.1038/nenergy.2016.177 ↗
6. L.-C. Chen and Z.-L. Tseng, Nanostructured Sol. Cells. (2017). https://doi.org/10.5772/65056.10.5772/65056 ↗
7. L. Zhu, Z. Shao, J. Ye, X. Zhang, X. Pan, and S. Dai, Chem. Commun. 52, 970–973 (2016). https://doi.org/10.1039/C5CC08156D.10.1039/C5CC08156D ↗
8. W. Chen, Y. Wu, Y. Yue, J. Liu, W. Zhang, X. Yang, H. Chen, E. Bi, I. Ashraful, M. Grätzel, and L. Han, Science 350, 944–948 (2015). https://doi.org/10.1126/science.aad1015.10.1126/science.aad1015 ↗
9. J.H. Heo, H.J. Han, D. Kim, T.K. Ahn, and S.H. Im, Energy Environ. Sci. 8, 1602–1608 (2015). https://doi.org/10.1039/C5EE00120J.10.1039/C5EE00120J ↗
10. J.-H. Im, I.-H. Jang, N. Pellet, M. Grätzel, and N.-G. Park, Nat. Nanotechnol. 9, 927–932 (2014). https://doi.org/10.1038/nnano.2014.181.10.1038/nnano.2014.181 ↗
11. S. Gharibzadeh, B.A. Nejand, A. Moshaii, N. Mohammadian, A.H. Alizadeh, R. Mohammadpour, V. Ahmadi, and A. Alizadeh, Chemsuschem 9, 1929–1937 (2016). https://doi.org/10.1002/cssc.201600132.10.1002/cssc.201600132 ↗
12. P. Karuppuswamy, C. Hanmandlu, K.M. Boopathi, P. Perumal, C.C. Liu, Y.F. Chen, Y.C. Chang, P.C. Wang, C.S. Lai, and C.W. Chu, Sol. Energy Mater. Sol. Cells 169, 78–85 (2017).10.1016/j.solmat.2017.04.043 ↗
13. A. Mei, X. Li, L. Liu, Z. Ku, T. Liu, Y. Rong, M. Xu, M. Hu, J. Chen, Y. Yang, M. Gratzel, and H. Han, Science 345, 295–298 (2014). https://doi.org/10.1126/science.1254763.10.1126/science.1254763 ↗
14. H. Zhou, Q. Chen, G. Li, S. Luo, T.-B. Song, H.-S. Duan, Z. Hong, J. You, Y. Liu, and Y. Yang, Science 345, 542–546 (2014). https://doi.org/10.1126/science.1254050.10.1126/science.1254050 ↗
15. D. Bi, W. Tress, M.I. Dar, P. Gao, J. Luo, C. Renevier, K. Schenk, A. Abate, F. Giordano, J.C. Baena, J. Decoppet, S.M. Zakeeruddin, M.K. Nazeeruddin, M. Grätzel, and A. Hagfeldt, ACSMs Guidelines 10th Ed 2017 Chp 3 Preexercise Evaluation.pdf, (2016). https://doi.org/10.1126/sciadv.1501170.10.1126/sciadv.1501170 ↗
16. T. Venkatachalam, K. Sakthivel, R. Renugadevi, R. Narayanasamy, P. Rupa, P. Predeep, M. Thakur, M.K.R. Varma (2011) in: AIP Conference Proceedings, vol. 5, pp. 764–766. https://doi.org/10.1063/1.3643673.10.1063/1.3643673 ↗
17. T.M.L. Hitchman, J. Electroanal. Chem. 538–539 (n.d.) 165–172. https://doi.org/10.1016/S0022-0728(02)01252-4.10.1016/S0022-0728(02)01252-4 ↗
18. M.J. Alam and D.C. Cameron, Surf. Coatings Technol. 142–144, 776–780 (2001). https://doi.org/10.1016/S0257-8972(01)01183-5.10.1016/S0257-8972(01)01183-5 ↗
19. S. Sung, S. Park, W.-J. Lee, J. Son, C.-H. Kim, Y. Kim, D.Y. Noh, and M.-H. Yoon, ACS Appl. Mater. Interfaces. 7, 7456–7461 (2015). https://doi.org/10.1021/acsami.5b00281.10.1021/acsami.5b00281 ↗
20. M. Pelaez, N.T. Nolan, S.C. Pillai, M.K. Seery, P. Falaras, A.G. Kontos, P.S.M. Dunlop, J.W.J. Hamilton, J.A. Byrne, K. O’Shea, M.H. Entezari, and D.D. Dionysiou, Appl. Catal. B Environ. 125, 331–349 (2012). https://doi.org/10.1016/j.apcatb.2012.05.036.10.1016/j.apcatb.2012.05.036 ↗
21. A. Dakka, J. Lafait, M. Abd-Lefdil, and C. Sella, M. J. Condensed Matter. vol. 2, N (n.d.).
22. D. Pjević, M. Obradović, T. Marinković, A. Grce, M. Milosavljević, R. Grieseler, T. Kups, M. Wilke, and P. Schaaf, Phys. B Condens. Matter. 463, 20–25 (2015). https://doi.org/10.1016/j.physb.2015.01.037.10.1016/j.physb.2015.01.037 ↗
23. P. Evans, M.E. Pemble, and D.W. Sheel, Chem. Mater. 18, 5750–5755 (2006). https://doi.org/10.1021/cm060816k.10.1021/cm060816k ↗
24. C. Edusi, G. Sankar, and I.P. Parkin, Chem. Vap. Depos. 18, 126–132 (2012). https://doi.org/10.1002/cvde.201106961.10.1002/cvde.201106961 ↗
25. T. Huang, W. Huang, C. Zhou, Y. Situ, and H. Huang, Surf. Coat. Technol. 213, 126–132 (2012). https://doi.org/10.1016/j.surfcoat.2012.10.033.10.1016/j.surfcoat.2012.10.033 ↗
26. C. Zhou, J. Ouyang, and B. Yang, Mater. Res. Bull. 48, 4351–4356 (2013). https://doi.org/10.1016/j.materresbull.2013.07.016.10.1016/j.materresbull.2013.07.016 ↗
27. V.L. Pool, B. Dou, D.G. Van Campen, T.R. Klein-Stockert, F.S. Barnes, S.E. Shaheen, M.I. Ahmad, M.F.A.M. van Hest, and M.F. Toney, Nat. Commun. 8, 14075 (2017). https://doi.org/10.1038/ncomms14075.10.1038/ncomms14075 ↗
28. V.E. Madhavan, I. Zimmermann, C. Roldán-Carmona, G. Grancini, M. Buffiere, A. Belaidi, and M.K. Nazeeruddin, ACS Energy Lett. 1, 1112–1117 (2016). https://doi.org/10.1021/acsenergylett.6b00501.10.1021/acsenergylett.6b00501 ↗
29. H. Borchert, E.V. Shevchenko, A. Robert, I. Mekis, A. Kornowski, G. Grübel, and H. Weller, Langmuir 21, 1931–1936 (2005). https://doi.org/10.1021/la0477183.10.1021/la0477183 ↗
30. D.G. Stavenga, Mater. Today Proc. 1, 109–121 (2014). https://doi.org/10.1016/j.matpr.2014.09.007.10.1016/j.matpr.2014.09.007 ↗
31. A.S. Bakri, M.Z. Sahdan, F. Adriyanto, N.A. Raship, N.D.M. Said, S.A. Abdullah, and M.S. Rahim, in: AIP Conf. Proc. 1788 (2017). https://doi.org/10.1063/1.4968283.10.1063/1.4968283 ↗
32. A.J. Bosman and E.E. Havinga, Phys. Rev. 129, 1593–1600 (1963). https://doi.org/10.1103/PhysRev.129.1593.10.1103/PhysRev.129.1593 ↗
33. R. Wu, B. Yang, J. Xiong, C. Cao, Y. Huang, F. Wu, J. Sun, C. Zhou, H. Huang, and J. Yang, J. Renew. Sustain. Energy 7, 043105 (2015). https://doi.org/10.1063/1.4926578.10.1063/1.4926578 ↗
34. K.D. B. Aktas, M. Albaskar, and S. Yalcin, Arch. Mater. Sci. Eng. 82 (n.d.) 57–61.10.5604/01.3001.0009.7104 ↗
35. D. Komaraiah, E. Radha, Y. Vijayakumar, J. Sivakumar, M.V.R. Reddy, and R. Sayanna, Mod. Res. Catal. 05, 130–146 (2016). https://doi.org/10.4236/mrc.2016.54011.10.4236/mrc.2016.54011 ↗
36. I. Dundar, M. Krichevskaya, A. Katerski, and I.O. Acik, R. Soc. Open Sci. 6, 181578 (2019). https://doi.org/10.1098/rsos.181578.10.1098/rsos.181578 ↗
37. M. Okuya, N.A. Prokudina, K. Mushika, and S. Kaneko, J. Eur. Ceram. Soc. 19, 903–906 (1999). https://doi.org/10.1016/S0955-2219(98)00341-0.10.1016/S0955-2219(98)00341-0 ↗
38. R. Songtanasit, T. Taychatanapat, and S. Chatraphorn, J. Phys: Conf. Ser. 901, 012161 (2017). https://doi.org/10.1088/1742-6596/901/1/012161.10.1088/1742-6596/901/1/012161 ↗
39. C. Li, Y. Li, Y. Xing, Z. Zhang, X. Zhang, Z. Li, Y. Shi, T. Ma, R. Ma, K. Wang, and J. Wei, ACS Appl. Mater. Interfaces. 7, 15117–15122 (2015). https://doi.org/10.1021/acsami.5b01959.10.1021/acsami.5b01959 ↗
40. S. Janitabar-Darzi, A.R. Mahjoub, and A. Nilchi, Phys. E Low-Dimens. Syst. Nanostruct. 42, 176–181 (2009). https://doi.org/10.1016/j.physe.2009.10.006.10.1016/j.physe.2009.10.006 ↗
41. P. Makuła, M. Pacia, and W. Macyk, J. Phys. Chem. Lett. 9, 6814–6817 (2018). https://doi.org/10.1021/acs.jpclett.8b02892.10.1021/acs.jpclett.8b02892 ↗
42. N.C. Raut, T. Mathews, P. Chandramohan, M.P. Srinivasan, S. Dash, and A.K. Tyagi, Mater. Res. Bull. 46, 2057–2063 (2011). https://doi.org/10.1016/j.materresbull.2011.06.043.10.1016/j.materresbull.2011.06.043 ↗
43. T. Supasai, N. Henjongchom, I.-M. Tang, F. Deng, and N. Rujisamphan, Sol. Energy 136, 515–524 (2016). https://doi.org/10.1016/j.solener.2016.07.035.10.1016/j.solener.2016.07.035 ↗
44. G.A. Sepalage, S. Meyer, A.R. Pascoe, A.D. Scully, U. Bach, Y.-B. Cheng, and L. Spiccia, Nano Energy 32, 310–319 (2017). https://doi.org/10.1016/j.nanoen.2016.12.043.10.1016/j.nanoen.2016.12.043 ↗
45. A.K. Baranwal, H. Kanda, N. Shibayama, and S. Ito, Sustain. Energy Fuels. 2, 2778–2787 (2018). https://doi.org/10.1039/C8SE00450A.10.1039/C8SE00450A ↗