Evident Enhancement of Efficiency and Stability in Perovskite Solar Cells with Triphenylamine-Based Macromolecules on the CuSCN Hole-Transporting Layer
Source abstract
Abstract
The CuSCN-containing perovskite solar cells (PSCs) are presently of great research focus due to the high carrier mobility and well-aligned work function of the CuSCN hole-transporting layer. The improvement of photovoltaic performance and stability is still an important subject in the practical applications of CuSCN-containing PSCs. Herein, a facile approach to improve the efficiency and stability of CuSCN-containing PSCs is developed by spin-coating the triphenylamine-based macromolecules between the CuSCN hole-transporting layer and metallic electrode, such as linear macromolecule poly-TPD and branched macromolecule CRA-TPA. The maximum power conversion efficiency (PCE) of CuSCN-containing PSCs is increased by linear triphenylamine-based macromolecule poly-TPD to 10.36% while the PCE value of CuSCN-containing PSCs, being modified by branched triphenylamine-based macromolecule CRA-TPA, reaches up to 11.97%. Evidently, the PCE values are nearly two times higher than 5.95% of CuSCN-containing control device. The photovoltaic improvement of macromolecule-modified CuSCN-containing PSCs is mainly caused by the strong hole-transporting capacity of triphenylamine-based macromolecules inducing the reduction of charge recombination, which is derived from the reduced potential barrier of hole transportation including the flatness and coverage improvement in the triphenylamine-based macromolecular functional layer. In addition, the stability of macromolecule-modified CuSCN-containing PSCs is significantly improved due to the protection of triphenylamine-based macromolecular layer on the perovskite film, so that the unencapsulated macromolecule-modified CuSCN-containing PSC device can keep over 70–80% of initial PCE value after 20-day exposure under ambient environment (relative humidity (RH) = 50%, 25°C). This work provides a facile approach to enhance the efficiency and stability of CuSCN-containing PSCs through the modification of triphenylamine-based macromolecules between the CuSCN hole-transporting layer and metallic electrode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A. Kojima, K. Teshima, Y. Shirai, and T. Miyasaka, J. Am. Chem. Soc. 131, 6050 (2009).10.1021/ja809598r ↗
2. H.S. Kim, C.R. Lee, J.H. Im, K.B. Lee, T. Moehl, A. Marchioro, S.J. Moon, R. Humphry-Baker, J.H. Yum, J.E. Moser, M. Gratzel, and N.G. Park, Sci. Rep. 2, 591 (2012).10.1038/srep00591 ↗
3. M.M. Lee, J. Teuscher, T. Miyasaka, T.N. Murakami, and H.J. Snaith, Science 338, 643 (2012).10.1126/science.1228604 ↗
4. Q. Jiang, Y. Zhao, X.W. Zhang, X.L. Yang, Y. Chen, Z.M. Chu, Q.F. Ye, X.X. Li, Z.G. Yin, and J.B. You, Nat. Photon. 13, 460 (2019).10.1038/s41566-019-0398-2 ↗
5. G.C. Xing, N. Mathews, S.Y. Sun, S.S. Lim, Y.M. Lam, M. Gratzel, S. Mhaisalkar, and T.C. Sum, Science 342, 344 (2013).10.1126/science.1243167 ↗
6. S.D. Stranks, G.E. Eperon, G. Grancini, C. Menelaou, M.J.P. Alcocer, T. Leijtens, L.M. Herz, A. Petrozza, and H.J. Snaith, Science 342, 341 (2013).10.1126/science.1243982 ↗
7. N.J. Jeon, J.H. Noh, W.S. Yang, Y.C. Kim, S. Ryu, J. Seo, and S.I. Seok, Nature 517, 476 (2015).10.1038/nature14133 ↗
8. C.S. Ponseca, T.J. Savenije, M. Abdellah, K. Zheng, A. Yartsev, T. Pascher, T. Harlang, P. Chabera, T. Pullerits, A. Stepanov, J.P. Wolf, and V. Sundstrom, J. Am. Chem. Soc. 136, 5189 (2014).10.1021/ja412583t ↗
9. E.H. Jung, N.J. Jeon, E.Y. Park, C.S. Moon, T.J. Shin, T.Y. Yang, J.H. Noh, and J. Seo, Nature 567, 511 (2019).10.1038/s41586-019-1036-3 ↗
10. H.J. Snaith, Nat. Energy 4, 1 (2019).10.1038/s41560-018-0323-9 ↗
11. P. Docampo, J.M. Ball, M. Darwich, and G.E. Eperon, HJNat. Commun. 4, 2761 (2013).10.1038/ncomms3761 ↗
12. J.A. Christians, R.C.M. Fung, and P.V. Kamat, J. Am. Chem. Soc. 136, 758 (2014).10.1021/ja411014k ↗
13. C.T. Zuo, and L.M. Ding, Small 11, 5528 (2015).10.1002/smll.201501330 ↗
14. H.X. Rao, W.H. Sun, S.Y. Ye, W.B. Yan, Y.L. Li, H.T. Peng, Z.W. Liu, Z.Q. Bian, and C.H. Huang, ACS Appl. Mater. Interfaces 8, 7800 (2016).10.1021/acsami.5b12776 ↗
15. V.E. Madhavan, I. Zimmermann, C. Roldan-Carmona, G. Grancini, M. Buffiere, A. Belaidi, and M.K. Nazeeruddin, ACS Energy Lett. 1, 1112 (2016).10.1021/acsenergylett.6b00501 ↗
16. G.A. Casas, M.A. Cappelletti, A.P. Cedola, B.M. Soucase, and E.L.P.Y. Blanca, Superlattices Microstruct. 107, 136 (2017).10.1016/j.spmi.2017.04.007 ↗
17. P. Pattanasattayavong, G.O.N. Ndjawa, K. Zhao, K.W. Chou, N. Yaacobi-Gross, B.C. O’Regan, A. Amassian, and T.D. Anthopoulos, Chem. Commun. 49, 4154 (2013).10.1039/C2CC37065D ↗
18. M. Jung, Y.C. Kim, N.J. Jeon, W.S. Yang, J. Seo, J.H. Noh, and S.I. Seok, Chemsuschem 9, 2592 (2016).10.1002/cssc.201600957 ↗
19. S. Chavhan, O. Miguel, H.J. Grande, V. Gonzalez-Pedro, R.S. Sanchez, E.M. Barea, I. Mora-Sero, and R. Tena-Zaera, J. Mater. Chem. A 2, 12754 (2014).10.1039/C4TA01310G ↗
20. N. Yaacobi-Gross, N.D. Treat, P. Pattanasattayavong, H. Faber, A.K. Perumal, N. Stingelin, D.D.C. Bradley, P.N. Stavrinou, M. Heeney, and T.D. Anthopoulos, Adv. Energy Mater. 5, 1401529 (2015).10.1002/aenm.201401529 ↗
21. N. Arora, M.I. Dar, A. Hinderhofer, N. Pellet, F. Schreiber, S.M. Zakeeruddin, and M. Gratzel, Science 358, 768 (2017).10.1126/science.aam5655 ↗
22. I.S. Yang, S. Lee, J. Choi, M.T. Jung, J. Kim, and W.I. Lee, J. Mater. Chem. A 7, 6028 (2019).10.1039/C8TA12217B ↗
23. S.Y. Ye, W.H. Sun, Y.L. Li, W.B. Yan, H.T. Peng, Z.Q. Bian, Z.W. Liu, and C.H. Huang, Nano Lett. 15, 3723 (2015).10.1021/acs.nanolett.5b00116 ↗
24. Q. Li, Y.C. Zhao, R. Fu, W.K. Zhou, Y. Zhao, F. Lin, S. Liu, D.P. Yu, and Q. Zhao, J. Mater. Chem. A 5, 14881 (2017).10.1039/C7TA03315J ↗
25. X.W. Xu, C.Q. Ma, Y.H. Cheng, Y.M. Xie, X.P. Yi, B. Gautam, S.M. Chen, H.W. Li, C.S. Lee, F. So, and S.W. Tsang, J. Power Sour. 360, 157 (2017).10.1016/j.jpowsour.2017.06.013 ↗
26. W. Liu, H.T. Yang, W.B. Wu, H.Y. Gao, S.D. Xu, Q. Guo, Y.L. Liu, S.G. Xu, and S.K. Cao, J. Mater. Chem. C 4, 10684 (2016).10.1039/C6TC04062D ↗
27. S.G. Xu, C. Fang, Y.Z. Wu, W.B. Wu, Q. Guo, J. Zeng, X.Z. Wang, Y.L. Liu, and S.K. Cao, Dyes Pigments 142, 8 (2017).10.1016/j.dyepig.2017.03.001 ↗
28. W.S. Zong, L.X. Wang, Q. Guo, J. Li, W.B. Wu, Y.L. Liu, S.G. Xu, and S.K. Cao, Dyes Pigments 160, 579 (2019).10.1016/j.dyepig.2018.08.050 ↗
29. W.S. Zong, S. Wang, J. Li, J.T. Wang, M.M. Li, Y.L. Liu, S.G. Xu, and S.K. Cao, React. Funct. Polym. 143, 104321 (2019).10.1016/j.reactfunctpolym.2019.104321 ↗
30. Y.Q. Du, X. Wang, D.Q. Lian, Y.L. Liu, L. Zhang, S.G. Xu, and S.K. Cao, Electrochim. Acta 349, 136387 (2020).10.1016/j.electacta.2020.136387 ↗
31. H. Li, C. Liang, Y.L. Liu, Y.Q. Zhang, J.C. Tong, W.W. Zuo, S.G. Xu, G.S. Shao, and S.K. Cao, ACS Appl. Mater. Interfaces 9, 6064 (2017).10.1021/acsami.6b15434 ↗
32. X.F. Cao, Y.Z. Han, J.K. Zhou, W.W. Zuo, X. Gao, L.F. Han, X.C. Pang, L. Zhang, Y.L. Liu, and S.K. Cao, ACS Appl. Mater. Interfaces 11, 35914 (2019).10.1021/acsami.9b12931 ↗
33. P. Shu, X.F. Cao, Y.Q. Du, J.K. Zhou, J.J. Zhou, S.G. Xu, Y.L. Liu, and S.K. Cao, J. Mater. Chem. C 8, 12865 (2020).10.1039/D0TC02579H ↗
34. C. Schmitz, P. Posch, M. Thelakkat, H.W. Schmidt, A. Montali, K. Feldman, P. Smith, and C. Weder, Adv. Funct. Mater. 11, 41 (2001).10.1002/1616-3028(200102)11:1<41::AID-ADFM41>3.0.CO;2-S ↗
35. A.B. Wong, S. Brittman, Y. Yu, N.P. Dasgupta, and P.D. Yang, Nano Lett. 15, 4096 (2015).10.1021/acs.nanolett.5b01203 ↗
36. L. Meng, C.K. Sun, R. Wang, W.C. Huang, Z.P. Zhao, P.Y. Sun, T.Y. Huang, J.J. Xue, J.W. Lee, C.H. Zhu, Y. Huang, Y.F. Li, and Y. Yang, J. Am. Chem. Soc. 140, 17255 (2018).10.1021/jacs.8b10520 ↗
37. W. Yan, S. Ye, Y. Li, W. Sun, H. Rao, Z. Liu, Z. Bian, and C. Huang, Adv. Energy Mater. 6, 1600474 (2016).10.1002/aenm.201600474 ↗