Effect of GaN Substrate Properties on Vertical GaN PiN Diode Electrical Performance
Source abstract
Abstract
Present GaN technology consists primarily of heteroepitaxial, lateral high electron mobility transistors; however, high-power devices would be much more efficiently manufactured with a vertical geometry due to better blocking voltage scaling. This technology has yet to be realized due to the inconsistency of GaN wafer properties. These inconsistencies can be detected with several long-range, non-destructive techniques including Raman spectroscopy, optical profilometry, and photoluminescence mapping. In particular, Raman spectroscopy is an effective tool for determining the carrier concentration of GaN substrates and whether the wafers are uniform or inhomogeneous. In this work, vertical p-i-n GaN diodes are fabricated using both uniform and inhomogeneous wafers determined by using the A1 Raman peak position to monitor carrier concentration. The inhomogeneous samples have regular patterns of varying conductivity as a result of electron-donating defects brought about by changes in crystal stress. By avoiding these defects, we have found that diode performance improves by increasing the +/− 10 V rectification ratio by up to a factor of 5X and reducing the 200 V reverse bias leakage current by several orders of magnitude. Using the higher quality substrates with uniform electron carrier concentrations can improve the rectification ratio by another order of magnitude.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Ga2O3 and related materials · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. I.C. Kizilyalli, P. Bui-Quang, D. Disney, H. Bhatia, and O. Aktas, Microelectron. Reliab. 55, 1654 (2015).10.1016/j.microrel.2015.07.012 ↗
2. C. Mion, J.F. Muth, E.A. Preble, and D. Hanser, Appl. Phys. Lett. 89, 092123 (2006).10.1063/1.2335972 ↗
3. B.N. Pushpakaran, A.S. Subburaj, and S.B. Bayne, J. Electron. Mater. 49, 6247 (2020).10.1007/s11664-020-08397-z ↗
4. S.J. Pearton, Y.-S. Hwang, and F. Ren, J. Miner. Met. Mater. Soc. 67, 1601 (2015).10.1007/s11837-015-1359-y ↗
5. B.D. Weaver, T.J. Anderson, A.D. Koehler, J.D. Greenlee, J.K. Hite, D.I. Shahin, F.J. Kub, and K.D. Hobart, ECS J. Solid State Sci. Technol. 5, Q208 (2016).10.1149/2.0281607jss ↗
6. T.J. Anderson, A.D. Koehler, J.D. Greenlee, B.D. Weaver, M.A. Mastro, J.K. Hite, C.R. Eddy, F.J. Kub, K.D. Hobart, S. Member, A.D. Koehler, J.D. Greenlee, B.D. Weaver, M.A. Mastro, J.K. Hite, C.R. Eddy, S. Member, F.J. Kub, and K.D. Hobart, IEEE Electron Dev. Lett. 35, 826 (2014).10.1109/LED.2014.2331001 ↗
7. R. Kucharski, T. Sochacki, B. Lucznik, and M. Bockowski, J. Appl. Phys. 128, 050902 (2020).10.1063/5.0009900 ↗
8. J.C. Gallagher, T.J. Anderson, L.E. Luna, A.D. Koehler, J.K. Hite, N.A. Mahadik, K.D. Hobart, and F.J. Kub, J. Cryst. Growth 506, 178 (2019).10.1016/j.jcrysgro.2018.10.032 ↗
9. J.C. Gallagher, T.J. Anderson, A.D. Koehler, N.A. Mahadik, A. Nath, B.D. Weaver, K.D. Hobart, and F.J. Kub, ECS J. Solid State Sci. Technol. 6, S3060 (2017).10.1149/2.0151711jss ↗
10. A.D. Koehler, N. Nepal, T.J. Anderson, M.J. Tadjer, K.D. Hobart, C.R. Eddy, and F.J. Kub, IEEE Electron Dev. Lett. 34, 1115 (2013).10.1109/LED.2013.2274429 ↗
11. I.C. Kizilyalli, A.P. Edwards, O. Aktas, T. Prunty, and D. Bour, IEEE Trans. Electron Dev. 62, 414 (2015).10.1109/TED.2014.2360861 ↗
12. R.E. Stahlbush, K.X. Liu, Q. Zhang, and J.J. Sumakeris, Mater. Sci. Forum 556–557, 295 (2007).10.4028/www.scientific.net/MSF.556-557.295 ↗
13. R.E. Stahlbush, B.L. VanMil, R.L. Myers-Ward, K.-K. Lew, D.K. Gaskill, and C.R. Eddy, Appl. Phys. Lett. 94, 041916 (2009).10.1063/1.3070530 ↗
14. J.K. Hite, T.J. Anderson, L.E. Luna, J.C. Gallagher, M.A. Mastro, J.A. Freitas, and C.R. Eddy, J. Cryst. Growth 498, 352 (2018).10.1016/j.jcrysgro.2018.06.032 ↗
15. J.K. Hite, T.J. Anderson, M.A. Mastro, L.E. Luna, J.C. Gallagher, R.L. Myers-Ward, K.D. Hobart, and C.R. Eddy, ECS J. Solid State Sci. Technol. 6, S3103 (2017).10.1149/2.0221711jss ↗
16. J.C. Gallagher, T.J. Anderson, A.D. Koehler, M.A. Ebrish, M.A. Mastro, J.K. Hite, K.D. Hobart, and F.J. Kub, in 2020 Int. Conf. Compd. Semicond. Manuf. Technol. (2020), pp. 207–210
17. M.A. Ebrish, T.J. Anderson, A.D. Koehler, G.M. Foster, J.C. Gallagher, R.J. Kapalar, B.P. Gunning, and K.D. Hobart, IEEE Trans. Semicond. Manuf. 33, 546 (2020).10.1109/TSM.2020.3019212 ↗
18. J.K. Hite, M.A. Mastro, T.J. Anderson, J.C. Gallagher, M. Ebrish, and J.A. Freitas, ECS Trans. 98, 63 (2020).10.1149/09806.0063ecst ↗
19. R. Dwilinski, R. Doradzinski, J. Garczynski, L.P. Sierzputowski, M. Zajac, and M. Rudzinski, J. Cryst. Growth 311, 3058 (2009).10.1016/j.jcrysgro.2009.01.078 ↗
20. S. Suihkonen, S. Pimputkar, S. Sintonen, and F. Tuomisto, Adv. Electron. Mater. 3, 1600496 (2017).10.1002/aelm.201600496 ↗
21. D. Ehrentraut, R.T. Pakalapati, D.S. Kamber, W. Jiang, D.W. Pocius, B.C. Downey, M. McLaurin, and M.P. D’Evelyn, Jpn. J. Appl. Phys. 52, 0801 (2013).10.7567/JJAP.52.08JA01 ↗
22. K. Motoki, and S.E.I. Tech, Review 70, 28 (2010).
23. M. Kuball, Surf. Interface Anal. 31, 987 (2001).10.1002/sia.1134 ↗
24. G.M. Foster, A. Koehler, M. Ebrish, J. Gallagher, T. Anderson, B. Noesges, L. Brillson, B. Gunning, K.D. Hobart, and F. Kub, Appl. Phys. Lett. 117, 082103 (2020).10.1063/5.0021153 ↗