Enhanced Electrical Properties of P3HT:WO3 Hybrid Thin Film Transistors
Source abstract
Abstract
In recent decades, conjugated polymers have been widely studied in organic electronics to produce low-cost transistors. Additionally, these polymers are doped with inorganic materials in order to improve the transistor performance in terms of mobility, on/off current ratio, and threshold voltage as well as to ease processability. In this study, we use various doping concentrations (0–50% in weight) of tungsten oxide (WO3) in poly(3-hexylthiophene) (P3HT), a well-studied organic semiconductor, to optimize the transistor performance. We treat spin-coated film of the hybrid P3HT:WO3 solution on hexamethyl disilazane (HMDS) as channels of commercial test chips including 20 transistors with their gold electrodes. Compared to using pristine P3HT, the proposed hybrid P3HT:WO3 formula which significantly improves the transistor performance. Almost 105 times larger mobilities, almost 10 times larger on/off current ratios, and nearly 22 V decrease in threshold voltages were achieved. It was also observed that the excess amount of WO3 doping leads to worse mobilities and on/off current ratios.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. R.C. Sanfelice, L.A. Mercante, A. Pavinatto, N.B. Tomazio, C.R. Mendonça, S.J.L. Ribeiro, L.H.C. Mattoso, and D.S. Correa, Hybrid composite material based on polythiophene derivative nanofibers modified with gold nanoparticles for optoelectronics applications J. Mater. Sci., 2017, 52, p 1919.10.1007/s10853-016-0481-8 ↗
2. S. Savagatrup, A.D. Printz, D. Rodriquez, and D.J. Lipomi, Macromolecules, 2014, 47, p 1981.10.1021/ma500286d ↗
3. T.P. Kaloni, P.K. Giesbrecht, G. Schreckenbach, and M.S. Freund, Chem. Mater., 2017, 29, p 10248.10.1021/acs.chemmater.7b03035 ↗
4. A. Marrocchi, D. Lanari, A. Facchetti, and L. Vaccaro, Energy Environ. Sci., 2012, 5, p 8457.10.1039/c2ee22129b ↗
5. S. Holliday, J.E. Donaghey, and I. McCulloch, Chem. Mater., 2014, 26, p 647.10.1021/cm402421p ↗
6. A.C. Arias, J.D. MacKenzie, I. McCulloch, J. Rivnay, and A. Salleo, Chem. Rev., 2010, 11, p 3.10.1021/cr900150b ↗
7. T. Xie, G.Z. Xie, H.F. Du, Z.B. Ye, Y.J. Su, and Y.Y. Chen, Sci. China Technol. Sci., 2016, 59, p 714.10.1007/s11431-016-6039-9 ↗
8. S.M. Mok, F. Yan, and H.L.W. Chan, Appl. Phys. Lett., 2008, 93, p 023310.10.1063/1.2957981 ↗
9. A. Kumar, R.R. Navan, A. Kushwaha, M. Aslam, and V.R. Rao, Int. J. Nanosci., 2011, 10, p 761.10.1142/S0219581X11008800 ↗
10. M.S. Hammer, C. Deibel, J. Pflaum, and V. Dyakonov, Org. Electron., 2010, 11, p 1569.10.1016/j.orgel.2010.06.019 ↗
11. B. Lüssem, C.M. Keum, D. Kasemann, B. Naab, Z. Bao, and K. Leo, Chem. Rev., 2016, 116, p 13714.10.1021/acs.chemrev.6b00329 ↗
12. R.R. Navan, B. Panigrahy, M.S. Baghini, D. Bahadur, and V.R. Rao, Compos. Part B Eng., 2012, 43, p 1645.10.1016/j.compositesb.2011.08.007 ↗
13. Y. Liu, J. Yu, and P.T. Lai, Int. J. Hydrogen Energy, 2014, 39, p 10313.10.1016/j.ijhydene.2014.04.155 ↗
14. F. Wang, C. Di Valentin, and G. Pacchioni, J. Phys. Chem. C, 2011, 115, p 8345.10.1021/jp201057m ↗
15. L.G. Gerling, S. Mahato, C. Voz, R. Alcubilla, and J. Puigdollers, Appl. Sci., 2015, 5, p 695.10.3390/app5040695 ↗
16. M. Mews, L. Korte, and B. Rech, Sol. Energy Mater. Sol. Cells, 2016, 158, p 77.10.1016/j.solmat.2016.05.042 ↗
17. R.C. De Campos, D.T. Cestarolli, M. Mulato, and E.M. Guerra, Mater. Res., 2015, 18, p 15.10.1590/1516-1439.252513 ↗
18. T. Onozato, Y. Nezu, H.J. Cho, and H. Ohta, AIP Adv., 2019, 9, p 025122.10.1063/1.5089604 ↗
19. O. Gurcuoglu, D. Evecan, and E. Ozkan-Zayim, J. Solid State Electr., 2014, 19, p 403.10.1007/s10008-014-2605-x ↗
20. T. Jiemsakul, K. Jiramitmongkon, U. Asawapirom, and C. Chotsuwan, J. Mater. Sci., 2017, 52, p 8485.10.1007/s10853-017-1109-3 ↗
21. T.H. Kim, H.J. Jeon, J.W. Lee, and Y.C. Nah, Electrochem. Commun., 2015, 57, p 65.10.1016/j.elecom.2015.05.008 ↗
22. J. Yang, G.Z. Xie, Y.J. Su, Q.P. Zhang, H.F. Du, H.L. Tai, X.S. Du, and Y.D. Jiang, Sci. China Technol. Sci., 2018, 61, p 1696.10.1007/s11431-017-9230-3 ↗
23. S. Yuvaraja, A. Nawaz, Q. Liu, D. Dubal, S.G. Surya, K.N. Salama, and P. Sonar, Chem. Soc. Rev., 2020, 49, p 3426.10.1039/C9CS00811J ↗
24. X. L. Liu, Y. Zhao, W. J. Wang, S. X. Ma, X. J. Ning, L. Zhao, and J. Zhuang, Photovoltaic self-powered gas sensing: a review. IEEE Sens. J. (Early Access) (2020).
25. J. Kim, J.H. Kim, and K. Ariga, Joule, 2017, 1, p 739.10.1016/j.joule.2017.08.018 ↗
26. D. Evecan, S. Kaplan, M.Ş Sönmez, S. Yıldırım, M. Okutan, H. Deligöz, and E. Zayim, Microelectron. Eng., 2019, 215, p 110989.10.1016/j.mee.2019.110989 ↗
27. G.C. Schmidt, D. Höft, K. Haase, M. Bellmann, B. Kheradmand-Boroujeni, T. Hassinen, H. Sandberg, F. Ellinger, and A.C. Hübler, J. Polym. Sci. B Polym. Phys., 2015, 53, p 1409.10.1002/polb.23778 ↗
28. W. Huang, W. Shi, S. Han, and J. Yu, AIP Adv., 2013, 3, p 052122.10.1063/1.4807660 ↗
29. G. Horowitz, R. Hajlaoui, H. Bouchriha, R. Bourguiga, and M. Hajlaoui, Adv. Mater., 1998, 10, p 923.10.1002/(SICI)1521-4095(199808)10:12<923::AID-ADMA923>3.0.CO;2-W ↗
30. Y. Ito, A.A. Virkar, S. Mannsfeld, H.O. Joon, M. Toney, J. Locklin, and Z. Bao, J. Am. Chem. Soc., 2009, 131, p 9396.10.1021/ja9029957 ↗
31. J. Zaumseil, Adv. Polym. Sci., 2014, 265, p 107.10.1007/12_2014_279 ↗
32. D. K. Schroder, Semiconductor Material and Device Characterization, 3rd edn. (IEEE Press, Wiley, 2006) pp. 185–s25010.1002/0471749095 ↗
33. A. Bolognesi, W. Porzio, A. Provasoli, C. Botta, A. Comotti, P. Sozzani, and R. Simonutti, Macromol. Chem. Phys., 2001, 202, p 2586.10.1002/1521-3935(20010801)202:12<2586::AID-MACP2586>3.0.CO;2-V ↗
34. C. Borriello, S. Masala, V. Bizzarro, G. Nenna, M. Re, E. Pesce, C. Minarini, and T. Di Luccio, J. Appl. Polym. Sci., 2011, 122, p 3624.10.1002/app.34774 ↗
35. S. Li, P. Lin, L. Zhao, C. Wang, D. Liu, F. Liu, P. Sun, X. Liang, F. Liu, X. Yan, Y. Gao, and G. Lu, Sensors Actuators B Chem., 2018, 259, p 505.10.1016/j.snb.2017.11.081 ↗
36. D.E. Motaung, G.F. Malgas, C.J. Arendse, and S.E. Mavundla, Mater. Chem. Phys., 2012, 135, p 401.10.1016/j.matchemphys.2012.04.066 ↗
37. B. Lüssem, M. Riede, and K. Leo, Phys. Status Solidi Appl. Mater. Sci., 2013, 210, p 9.10.1002/pssa.201228310 ↗
38. J.C. Nolasco, R. Cabré, J. Ferré-Borrull, L.F. Marsal, M. Estrada, and J. Pallarès, J. Appl. Phys., 2010, 107, p 044505.10.1063/1.3296294 ↗
39. C.C. Chen, W.H. Chang, K. Yoshimura, K. Ohya, J. You, J. Gao, Z. Hong, and Y. Yang, Adv. Mater., 2014, 26, p 5670.10.1002/adma.201402072 ↗
40. S. Olthof, S. Singh, S.K. Mohapatra, S. Barlow, S.R. Marder, B. Kippelen, and A. Kahn, Appl. Phys. Lett., 2012, 101, p 253303.10.1063/1.4772551 ↗