Performance of a Thermoelectric Device with Integrated Heat Exchangers
Source abstract
Abstract
Thermoelectric devices (TEDs) convert heat directly into electrical energy, making them well suited for waste heat recovery applications. An integrated thermoelectric device (iTED) is a restructured TED that allows more heat to enter the p–n junctions, thus producing a greater power output $$P_\mathrm{o}$$ . An iTED has heat exchangers incorporated into the hot-side interconnectors with flow channels directing the working fluid through the heat exchangers. The iTED was constructed of p- and n-type bismuth-telluride semiconductors and copper interconnectors and rectangular heat exchangers. The performance of the iTED in terms of $$P_\mathrm{o}$$ , produced voltage $$V$$ and current $$I$$ , heat input $$Q_\mathrm{h}$$ and conversion efficiency $$\eta $$ for various flow rates ( $$2190\le Re_\mathrm{Dh} \le 9920$$ ), inlet temperatures ( $$50 \le T_\mathrm{in}\,(\circ $$ C) $$\le 150$$ ) and load resistances ( $$0 \le R_\mathrm{L} (\Omega)\le 5000$$ ) with a constant cold-side temperature ( $$T_\mathrm{c}$$ = 0 $$\circ $$ C) was conducted experimentally. An increase in $$T_\mathrm{in}$$ had a greater effect on the performance than did an increase in $$Re_\mathrm{Dh}$$ . A 3-fold increase in $$T_\mathrm{in}$$ resulted in a 3.2-, 3.1-, 9.7-, 3.5- and 2.8-fold increase in $$V,$$ $$I,$$ $$P_\mathrm{o},$$ $$Q_\mathrm{h}$$ and $$\eta, $$ respectively. For a constant $$T_\mathrm{in}$$ of 50 $$\circ $$ C, a 3-fold increase in $$Re_\mathrm{Dh}$$ from 3300 to 9920 resulted in 1.6-, 1.6-, 2.6-, 1.5- and 1.9-fold increases in $$V$$ , $$I$$ , $$P_\mathrm{o}$$ , $$Q_\mathrm{h}$$ and $$\eta, $$ respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. D.A. Lashof and D.R. Ahuja, Relative Contributions of Greenhouse Gas Emissions to Global Warming (Nature Publishing Group, New York, 1990), pp. 529–531
2. J. Hansen, M. Sato, P. Kharecha, G. Russell, D.W. Lea, and M. Siddall, Philos. Trans. R. Soc. Lond. A 365, 1925 (2007)10.1098/rsta.2007.2052 ↗
3. P.N. Pearson and M.R. Palmer, Nature 406, 695 (2000)10.1038/35021000 ↗
4. J. Hansen, D. Johnson, A. Lacis, S. Lebedeff, P. Lee, D. Rind, and G. Russell, Science 213, 957 (1981)10.1126/science.213.4511.957 ↗
5. J. Hansen, R. Ruedy, M. Sato, and K. Lo, Rev. Geophys. 48, RG4004 (2010)10.1029/2010RG000345 ↗
6. M. Meinshausen, N. Meinshausen, W. Hare, S.C. Raper, K. Frieler, R. Knutti, D.J. Frame, and M.R. Allen, Nature 458, 1158 (2009)10.1038/nature08017 ↗
7. Climate Change Mitigation, IPCC special report on renewable energy sources and climate change mitigation
8. J.H. Williams, A. DeBenedictis, R. Ghanadan, A. Mahone, J. Moore, W.R. Morrow, S. Price, and M.S. Torn, Science 335, 53 (2012)10.1126/science.1208365 ↗
9. N. Panwar, S. Kaushik, and S. Kothari, Renew. Sustain. Energy Rev. 15, 1513 (2011)10.1016/j.rser.2010.11.037 ↗
10. T.J. Seebeck, Ann. Phys. 82, 253 (1826)10.1002/andp.18260820302 ↗
11. J. Peltier, Ann. Chem. LVI, 371 (1834)
12. E. Altenkirch, Phys. Z. 10, 560 (1909)
13. E. Altenkirch, Phys. Z. 12, 920 (1911)
14. A.F. Ioffe, Semiconductor Thermoelements and Thermoelectric Cooling (Infosearch, London, 1957)
15. A.F. Ioffe, Sci. Am. 199, 31 (1958)10.1038/scientificamerican1158-31 ↗
16. D.M. Rowe (ed.), Thermoelectrics Handbook Macro to Nano (CRC Press, Taylor & Francis Group, Boca Raton, 2006)
17. J. Navratil, Z. Starý, and T. Plechacek, Mater. Res. Bull. 31, 1559 (1996)10.1016/S0025-5408(96)00149-3 ↗
18. C.-N. Liao, L.-C. Wu, and J.-S. Lee, J. Alloys Compd. 490, 468 (2010)10.1016/j.jallcom.2009.10.047 ↗
19. J. Shen, Z. Yin, S. Yang, C. Yu, T. Zhu, and X. Zhao, J. Electron. Mater. 40, 1095 (2011)10.1007/s11664-011-1549-5 ↗
20. X. Ji, X. Zhao, Y. Zhang, B. Lu, and H. Ni, J. Alloys Compd. 387, 282 (2005)10.1016/j.jallcom.2004.06.047 ↗
21. F. Yu, J. Zhang, D. Yu, J. He, Z. Liu, B. Xu, and Y. Tian, J. Appl. Phys. 105, 094303 (2009)10.1063/1.3120865 ↗
22. M.-P. Lu, and C.-N. Liao, J. Alloys Compd. 571, 178 (2013)10.1016/j.jallcom.2013.03.190 ↗
23. J.R. Sootsman, D.K. Chung, and M.G. Kanatzidis, Angew. Chem. Int. Ed. Engl. 48, 8616 (2009)10.1002/anie.200900598 ↗
24. T.M. Tritt, Annu. Rev. Mater. Res. 41, 433 (2011)10.1146/annurev-matsci-062910-100453 ↗
25. K. Biswas, J. He, I.D. Blum, C. Wu, T.P. Hogan, D.N. Seidman, V.P. Dravid, and M.G. Kanatzidis, Nature 489, 414 (2012)10.1038/nature11439 ↗
26. B. Poudel, Q. Hao, Y. Ma, Y. Lan, A. Minnich, B. Yu, X. Yan, D. Wang, A. Muto, D. Vashaee, X. Chen, J. Liu, M.S. Dresselhaus, G. Chen, and Z. Ren, Science 320, 634 (2008)10.1126/science.1156446 ↗
27. J. Yang, X. Fan, R. Chen, W. Zhu, S. Bao, and X. Duan, J. Alloys Compd. 416, 270 (2006)10.1016/j.jallcom.2005.08.054 ↗
28. J. Hassel and J. Tervo, J. Electron. Mater. 42, 1745 (2013)10.1007/s11664-012-2408-8 ↗
29. J. Virta and J. Tervo, Experimenting with hot isostatically pressed (HIP) nano grained bismuth-telluride-based alloys, in 9th European Conference on Thermoelectrics: ECT2011, vol. 1449 (AIP Publishing, New York), pp. 544–547 (2012)10.1063/1.4731614 ↗
30. T. Caillat, J. P. Fleurial, G. J. Snyder, A. Zoltan, D. Zoltan, and A. Borshchevsky, Development of a high efficiency thermoelectric unicouple for power generation applications, Proceedings of the XVllI International Conference on Thermoelectrics, (Baltimore, 1999)10.1109/ICT.1999.843433 ↗
31. H. Kaibe, I. Aoyama, M. Mukoujima, T. Kanda, S. Fujimoto, T. Kurosawa, H. Ishimabushi, K. Ishida, L. Rauscher, Y. Hata, and S. Sano, Development of thermoelectric generating stacked modules aiming for 15% of conversion efficiency, in International Conference on Thermoelectrics, IEEE, pp. 242–247 (2005)10.1109/ICT.2005.1519929 ↗
32. M. Hodes, IEEE Trans. Compon. Packag. Technol. 33, 307 (2010)10.1109/TCAPT.2009.2039934 ↗
33. G. Liang, J. Zhou, and X. Huang, Appl. Energy 88, 5193 (2011)10.1016/j.apenergy.2011.07.041 ↗
34. D. Crane, C. Koripella, and V. Jovovic, J. Electron. Mater. 41, 1524 (2012)10.1007/s11664-012-1955-3 ↗
35. T. Fujisaka, H. Sui, and R.O. Suzuki, J. Electron. Mater. 42, 1688 (2013)10.1007/s11664-012-2400-3 ↗
36. J. LaGrandeur, D. Crane, S. Hung, B. Mazar, and A. Eder, Automotive waste heat conversion to electric power using skutterudite, TAGS, PbTe and BiTe, ICT06, 25th International Conference on Thermoelectrics, pp. 343–348 (2006)10.1109/ICT.2006.331220 ↗
37. D. Crane and J. LaGrandeur, J. Electron. Mater. 39, 2142 (2010)10.1007/s11664-009-0991-0 ↗
38. D. Crane, J. LaGrandeur, V. Jovovic, M. Ranalli, M. Adldinger, E. Poliquin, J. Dean, D. Kossakovski, B. Mazar, and C. Maranville, J. Electron. Mater. 42, 1582 (2012)10.1007/s11664-012-2327-8 ↗
39. D.-J. Yao, K.-J. Yeh, C.-T. Hsu, B.-M. Yu, and J.-S. Lee, IEEE Nanotechnol. Mag. 3, 28 (2009)10.1109/MNANO.2009.932420 ↗
40. K. Chau and C. Chan, Proc. IEEE 95, 821 (2007)10.1109/JPROC.2006.890114 ↗
41. D. Yang and H. Yin, IEEE Trans. Energy Convers. 26, 662 (2011)10.1109/TEC.2011.2112363 ↗
42. N. Wang, L. Han, H. He, N.-H. Park, and K. Koumoto, Energy Environ. Sci. 4, 3676 (2011)10.1039/c1ee01646f ↗
43. G. Rockendorf, R. Sillmann, L. Podlowski, and B. Litzenburger, Solar Energy 67, 227 (1999)10.1016/S0038-092X(00)00075-X ↗
44. W. Sark, Appl. Energy 88, 2785 (2011)10.1016/j.apenergy.2011.02.008 ↗
45. M. Chyu, B. Reddy, M. Barry, and J. Li, Enhanced heat transfer characteristics and performance of composite thermoelectric devices, Interantional Conference on Advanced Computational Methods and Experiments in Heat Transfer XII, vol. 35, pp. 13–24 (2012)10.2495/HT120021 ↗
46. B.V.K. Reddy, M. Barry, J. Li, and M.K. Chyu, Energy Proc. 14, 2088 (2012)10.1016/j.egypro.2011.12.1212 ↗
47. B.V.K. Reddy, M. Barry, J. Li, and M.K. Chyu, Comprehensive numerical modeling of thermoelectric devices applied to automotive exhaust gas waste-heat recovery, in ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013, 7th International Conference on Energy Sustainability and the ASME 2013, 11th International Conference on Fuel Cell Science, Engineering and Technology, American Society of Mechanical Engineers (2013)10.1115/HT2013-17454 ↗
48. B.V.K. Reddy, M. Barry, J. Li, and M.K. Chyu, Front. Heat Mass Transf. 4, 023001 (2013)
49. B.V.K. Reddy, M. Barry, J. Li, and M.K. Chyu, J. Heat Transf. 135, 031706 (2013)10.1115/1.4007892 ↗
50. B.V.K. Reddy, M. Barry, J. Li, and M.K. Chyu, Thermoelectric-hydraulic performance of a multistage integrated thermoelectric power generator. Energy Convers. Manag. 77, 458 (2014)10.1016/j.enconman.2013.09.040 ↗
51. B.V.K. Reddy, M. Barry, J. Li, and M.K. Chyu, Numer. Heat Transf. Part A 62, 933 (2012)10.1080/10407782.2012.715988 ↗