Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites
Source abstract
Abstract
To investigate the effect of synthesis procedure and sintering temperature on the functional properties of perovskite/spinel ceramics, BaTiO3/CoFe2O4 composites were prepared by thermal decomposition, coprecipitation, and microemulsion method, and sintered at 1150?C and 1300?C. The phase composition and morphology of as-prepared powders as well as sintered ceramics were thoroughly examined by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS). The dielectric and ferroelectric measurements were performed in detail. Generally, the samples sintered at 1300?C had better performances than those sintered at 1150?C. The composite synthesized by thermal decomposition and sintered at 1300?C stands out among other prepared BaTiO3/CoFe2O4 ceramics, owing to high stability in the wide frequency range and low leakage currents. The obtained results indicate that such composite might be successfully applied as a functional multiferroic.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Multiferroics and related materials · Ferroelectric and Piezoelectric Materials · Magnetic Properties and Synthesis of Ferrites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Belgrade, Institute of Chemistry, Technology and Metallurgy, Department of Chemistry, Belgrade, Serbia
Faculty of Mining and Geology, University of Belgrade, Belgrade, Serbia
Faculty of Physics, University of Belgrade, Belgrade, Serbia
Institute for Multidisciplinary Research, University of Belgrade, Belgrade, Serbia
Department of Materials „Vinča" Institute of Nuclear Sciences - National Institute of thе Republic of Serbia, University of Belgrade, Belgrade, Serbia
University of Belgrade, Faculty of Agriculture, Zemun, Belgrade, Serbia
Funding
Ministry of Education, Science and Technological Development of the Republic of Serbia
References (47)
Show source-provided references
1. M.A. Nazir, M. Ul-Islam, I. Ali, H. Ali, B. Ahmad, S.M. Ramay, N. Raza, M.F. Ehsan, M.N. Ashiq, Structural, J. Electron. Mater. 45 (2016) 1065.10.1007/s11664-015-4286-3 ↗
2. Z. Manzoor, A. Khalid, G.M. Mustafa, S.M. Ramay, S. Naseem, S. Atiq, J. Magn. Magn. Mater. 500 (2020) 166409.10.1016/j.jmmm.2020.166409 ↗
3. A.M. Moustafa, S.A. Gad, G.M. Turky, L.M. Salah, Structural, J. Solid State Sci. Technol. 11 (2022) 33008.10.1149/2162-8777/ac5c7d ↗
4. Y. Tokunaga, N. Furukawa, H. Sakai, Y. Taguchi, T. Arima, Y. Tokura, Nat. Mater. 8 (2009) 558.10.1038/nmat2469 ↗
5. R. Liu, Y. Zhao, R. Huang, Y. Zhao, H. Zhou, J. Mater. Chem. 20 (2010) 10665.10.1039/c0jm02602f ↗
6. P. Augustine, Y. Narayana, N. Kalarikkal, Nanoscale Adv. 3 (2021) 4866.10.1039/D1NA00376C ↗
7. J.S. Bangruwa, B.K. Vashisth, N. Singh, N. Singh, V. Verma, J. Alloys Compd. 739 (2018) 319.10.1016/j.jallcom.2017.12.281 ↗
8. V. Buscaglia, C.A. Randall, J. Eur. Ceram. Soc. 40 (2020) 3744.10.1016/j.jeurceramsoc.2020.01.021 ↗
9. V. Paunović, Z. Prijić, V. V. Mitić, Sci. Sinter. 54 (2022) 81.10.2298/SOS2201081P ↗
10. S. Filipović, L. Anđelković, D. Jeremić, P. Vulić, A.S. Nikolić, S. Marković, V. Paunović, S. Lević, V.B. Pavlović, Sci. Sinter. 52 (2020) 257.
11. T. Tsurumi, T. Hoshina, H. Takeda, Y. Mizuno, H. Chazono, IEEE Trans. Ultrason. Ferroelectr. Freq. Control. 56 (2009) 1513. doi:10.1109/TUFFC.2009.1214.10.1109/TUFFC.2009.1214 ↗
12. W.P. Mason, R.F. Wick, J. Acoust. Soc. Am. 23 (1951) 209.10.1121/1.1906746 ↗
13. P. Tang, D.J. Towner, A.L. Meier, B.W. Wessels, Appl. Phys. Lett. 85 (2004) 4615.10.1063/1.1819515 ↗
14. M. Wegmann, R. Brönnimann, F. Clemens, T. Graule, Sensors Actuators A Phys. 135 (2007) 394.10.1016/j.sna.2006.08.008 ↗
15. D.S. Mathew, R.-S. Juang, Chem. Eng. J. 129 (2007) 51.10.1016/j.cej.2006.11.001 ↗
16. C.O. Ehi-Eromosele, I.B. Iserom, I.E.E. Joshua, Sci. Sinter. 48 (2016) 221.10.2298/SOS1602221O ↗
17. S.B. Narang, K. Pubby, J. Magn. Magn. Mater. 519 (2021) 167163.10.1016/j.jmmm.2020.167163 ↗
18. H. Wu, G. Liu, X. Wang, J. Zhang, Y. Chen, J. Shi, H. Yang, H. Hu, S. Yang, Acta Biomater. 7 (2011) 3496.10.1016/j.actbio.2011.05.031 ↗
19. G. Wang, Y. Ma, Z. Wei, M. Qi, Chem. Eng. J. 289 (2016) 150.10.1016/j.cej.2015.12.072 ↗
20. M. Pardavi-Horvath, J. Magn. Magn. Mater. 215-216 (2000) 171.10.1016/S0304-8853(00)00106-2 ↗
21. E. Schloemann, J. Magn. Magn. Mater. 209 (2000) 15.10.1016/S0304-8853(99)00635-6 ↗
22. T. Tatarchuk, M. Bououdina, J. Judith Vijaya, L. John Kennedy, Spinel Ferrite Nanoparticles: Synthesis, Crystal Structure, Properties, and Perspective Applications, in: O. Fesenko, L. Yatsenko (Eds.), Nanophysics, Nanomater. Interface Stud. Appl., Springer International Publishing, Cham, 2017: pp. 305-325.10.1007/978-3-319-56422-7_22 ↗
23. B.I. Kharisov, H.V.R. Dias, O. V Kharissova, Arab. J. Chem. 12 (2019) 1234.10.1016/j.arabjc.2014.10.049 ↗
24. K.C. Verma, M. Singh, R.K. Kotnala, N. Goyal, J. Magn. Magn. Mater. 469 (2019) 483.10.1016/j.jmmm.2018.09.020 ↗
25. M. Vinyas, S.C. Kattimani, Compos. Struct. 185 (2018) 51.10.1016/j.compstruct.2017.10.073 ↗
26. H. Yang, G. Zhang, Y. Lin, J. Alloys Compd. 644 (2015) 390.10.1016/j.jallcom.2015.05.020 ↗
27. M. ud Din Rather, R. Samad, N. Hassan, B. Want, J. Alloys Compd. 794 (2019) 402-416.10.1016/j.jallcom.2019.04.244 ↗
28. M. Etier, V. V Shvartsman, S. Salamon, Y. Gao, H. Wende, D.C. Lupascu, J. Am. Ceram. Soc. 99 (2016) 3623.10.1111/jace.14362 ↗
29. D. Erdem, N.S. Bingham, F.J. Heiligtag, N. Pilet, P. Warnicke, C.A.F. Vaz, Y. Shi, M. Buzzi, J.L.M. Rupp, L.J. Heyderman, M. Niederberger, ACS Nano. 10 (2016) 9840.10.1021/acsnano.6b05469 ↗
30. A. Ruiz, M. Nair, A. Kaushik, Sci Lett J. 4 (2015) 172.
31. S. Mhambi, D. Fisher, M.B. Tchoula Tchokonte, A. Dube, Pharmaceutics. 13 (2021) 1479.10.3390/pharmaceutics13091479 ↗
32. R. Guduru, P. Liang, J. Hong, A. Rodzinski, A. Hadjikhani, J. Horstmyer, E. Levister, S. Khizroev, Nanomedicine. 10 (2015) 2051.10.2217/nnm.15.52 ↗
33. B.N. Rao, P. Kaviraj, S.R. Vaibavi, A. Kumar, S.K. Bajpai, A. Arockiarajan, J. Appl. Phys. 122 (2017) 164102.10.1063/1.4993831 ↗
34. D. Dominguez-Paredes, A. Jahanshahi, K.L. Kozielski, Brain Stimul. 14 (2021) 1285.10.1016/j.brs.2021.08.001 ↗
35. S. Kopyl, R. Surmenev, M. Surmeneva, Y. Fetisov, A. Kholkin, Mater. Today Bio. 12 (2021) 100149.10.1016/j.mtbio.2021.100149 ↗
36. L. V Leonel, J.B. Silva, A.S. Albuquerque, J.D. Ardisson, W.A.A. Macedo, N.D.S. Mohallem, J. Phys. Chem. Solids. 73 (2012) 1362.10.1016/j.jpcs.2012.06.011 ↗
37. L.M. Hrib, O.F. Caltun, J. Alloys Compd. 509 (2011) 6644.10.1016/j.jallcom.2011.03.121 ↗
38. X. Zhang, G. Chen, C. Fu, W. Cai, R. Gao, F. Wang, Process. Appl. Ceram. 12 (2018) 45.10.2298/PAC1801045Z ↗
39. Q.H. Jiang, Z.J. Shen, J.P. Zhou, Z. Shi, C.-W. Nan, J. Eur. Ceram. Soc. 27 (2007) 279.10.1016/j.jeurceramsoc.2006.02.041 ↗
40. L. Weng, Y. Fu, S. Song, J. Tang, J. Li, Scr. Mater. 56 (2007) 465.10.1016/j.scriptamat.2006.11.032 ↗
41. R.P. Mahajan, K.K. Patankar, M.B. Kothale, S.C. Chaudhari, V.L. Mathe, S.A. Patil, Pramana - J. Phys. 58 (2002) 1115.10.1007/s12043-002-0227-9 ↗
42. V.H. Schmidt, N. Archer, C.-S. Tu, J. Am. Ceram. Soc. 101 (2018) 713.10.1111/jace.15236 ↗
43. Y. Leyet, F. Guerrero, J.P. de la Cruz, Mater. Sci. Eng. B. 171 (2010) 127.10.1016/j.mseb.2010.03.085 ↗
44. S. Breuer, D. Prutsch, Q. Ma, V. Epp, F. Preishuber-Pflügl, F. Tietz, M. Wilkening, J. Mater. Chem. A. 3 (2015) 21343.10.1039/C5TA06379E ↗
45. M.V.F. Heinz, M.-C. Bay, U.F. Vogt, C. Battaglia, Acta Mater. 213 (2021) 116940.10.1016/j.actamat.2021.116940 ↗
46. L. McGovern, I. Koschany, G. Grimaldi, L.A. Muscarella, B. Ehrler, J. Phys. Chem. Lett. 12 (2021) 2423.10.1021/acs.jpclett.1c00205 ↗
47. A.S. Dzunuzovic, M.M.V. Petrovic, J.D. Bobic, N.I. Ilic, B.D. Stojanovic, J. Electroceramics. 46 (2021) 57.10.1007/s10832-021-00244-9 ↗