Charge transport materials for monolithic perovskite-based tandem solar cells: A review
Source abstract
Abstract
开发钙钛矿叠层太阳电池是一种可以突破单结太阳电池Shockley-Queisser极限的光伏技术. 令人鼓舞的是, 所有钙钛矿叠层器件, 包括钙钛矿/硅、钙钛矿/钙钛矿、钙钛矿/铜铟镓硒和钙钛矿/有机叠层电池, 都表现出比相应单结太阳电池更高的效率, 显示出巨大的进一步突破的潜力. 在叠层器件中, 电荷传输材料是钙钛矿子电池的重要组成部分, 它直接决定了器件的电荷传输和能量损失. 一般来说, 高导电性和透光性、良好的能级和化学稳定性是电荷传输材料叠层应用的关键. 迄今为止, 导电金属氧化物、有机分子、聚合物、富勒烯、自组装材料等各种电荷传输材料已被广泛应用于高效叠层电池. 在本文中, 我们首先总结了不同类型钙钛矿叠层电池的电荷传输材料的最新进展,详细讨论了材料的电学和光学性质及其对器件性能的影响. 在此基础上, 我们提出了叠层电池中电荷传输材料进一步发展所面临的挑战和展望. 本综述将为不同钙钛矿叠层太阳电池的器件设计提供有效指导.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Kojima A, Teshima K, Shirai Y, et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc, 2009, 131: 6050–605110.1021/ja809598r ↗
2. Jiang Q, Tong J, Xian Y, et al. Surface reaction for efficient and stable inverted perovskite solar cells. Nature, 2022, 611: 278–28310.1038/s41586-022-05268-x ↗
3. Peng J, Kremer F, Walter D, et al. Centimetre-scale perovskite solar cells with fill factors of more than 86 percent. Nature, 2022, 601: 573–57810.1038/s41586-021-04216-5 ↗
4. Jeong J, Kim M, Seo J, et al. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells. Nature, 2021, 592: 381–38510.1038/s41586-021-03406-5 ↗
5. Kim M, Jeong J, Lu H, et al. Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells. Science, 2022, 375: 302–30610.1126/science.abh1885 ↗
6. Li X, Zhang W, Guo X, et al. Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells. Science, 2022, 375: 434–43710.1126/science.abl5676 ↗
7. Li Z, Li B, Wu X, et al. Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells. Science, 2022, 376: 416–42010.1126/science.abm8566 ↗
8. Min H, Lee DY, Kim J, et al. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes. Nature, 2021, 598: 444–45010.1038/s41586-021-03964-8 ↗
9. Zhang F, Park SY, Yao C, et al. Metastable Dion-Jacobson 2D structure enables efficient and stable perovskite solar cells. Science, 2022, 375: 71–7610.1126/science.abj2637 ↗
10. Zhang T, Wang F, Kim HB, et al. Ion-modulated radical doping of spiro-OMeTAD for more efficient and stable perovskite solar cells. Science, 2022, 377: 495–50110.1126/science.abo2757 ↗
11. Zhao Y, Ma F, Qu Z, et al. Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells. Science, 2022, 377: 531–53410.1126/science.abp8873 ↗
12. Zuo C, Bolink HJ, Han H, et al. Advances in perovskite solar cells. Adv Sci, 2016, 3: 150032410.1002/advs.201500324 ↗
13. Fang Z, Zeng Q, Zuo C, et al. Perovskite-based tandem solar cells. Sci Bull, 2021, 66: 621–63610.1016/j.scib.2020.11.006 ↗
14. He R, Ren S, Chen C, et al. Wide-bandgap organic-inorganic hybrid and all-inorganic perovskite solar cells and their application in all-perovskite tandem solar cells. Energy Environ Sci, 2021, 14: 5723–575910.1039/D1EE01562A ↗
15. Chen B, Ren N, Li Y, et al. Insights into the development of monolithic perovskite/silicon tandem solar cells. Adv Energy Mater, 2022, 12: 200362810.1002/aenm.202003628 ↗
16. Wang R, Huang T, Xue J, et al. Prospects for metal halide perovskite-based tandem solar cells. Nat Photonics, 2021, 15: 411–42510.1038/s41566-021-00809-8 ↗
17. Green MA, Dunlop ED, Siefer G, et al. Solar cell efficiency tables (version 61). Prog Photovoltaics, 2023, 31: 3–1610.1002/pip.3646 ↗
18. Leijtens T, Bush KA, Prasanna R, et al. Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors. Nat Energy, 2018, 3: 828–83810.1038/s41560-018-0190-4 ↗
19. Zhang Z, Li Z, Meng L, et al. Perovskite-based tandem solar cells: Get the most out of the sun. Adv Funct Mater, 2020, 30: 200190410.1002/adfm.202001904 ↗
20. Bi C, Yuan Y, Fang Y, et al. Low-temperature fabrication of efficient wide-bandgap organolead trihalide perovskite solar cells. Adv Energy Mater, 2015, 5: 140161610.1002/aenm.201401616 ↗
21. Tong J, Jiang Q, Zhang F, et al. Wide-bandgap metal halide perovskites for tandem solar cells. ACS Energy Lett, 2020, 6: 232–24810.1021/acsenergylett.0c02105 ↗
22. Suri M, Hazarika A, Larson BW, et al. Enhanced open-circuit voltage of wide-bandgap perovskite photovoltaics by using alloyed (FA1−xCsx) Pb(I1−xBrx)3 quantum dots. ACS Energy Lett, 2019, 4: 1954–196010.1021/acsenergylett.9b01030 ↗
23. Fang Z, Jia L, Yan N, et al. Proton-transfer-induced in situ defect passivation for highly efficient wide-bandgap inverted perovskite solar cells. InfoMat, 2022, 4: e1230710.1002/inf2.12307 ↗
24. Gu S, Lin R, Han Q, et al. Tin and mixed lead-tin halide perovskite solar cells: Progress and their application in tandem solar cells. Adv Mater, 2020, 32: 190739210.1002/adma.201907392 ↗
25. Wang C, Song Z, Li C, et al. Low-bandgap mixed tin-lead perovskites and their applications in all-perovskite tandem solar cells. Adv Funct Mater, 2019, 29: 180880110.1002/adfm.201808801 ↗
26. Yang Z, Rajagopal A, Chueh CC, et al. Stable low-bandgap Pb–Sn binary perovskites for tandem solar cells. Adv Mater, 2016, 28: 8990–899710.1002/adma.201602696 ↗
27. Yan N, Ren X, Fang Z, et al. Ligand-anchoring-induced oriented crystal growth for high-efficiency lead-tin perovskite solar cells. Adv Funct Mater, 2022, 32: 220138410.1002/adfm.202201384 ↗
28. Li J, Yan N, Fang Z, et al. Alkyl diamine-induced (100)-preferred crystal orientation for efficient Pb-Sn perovskite solar cells. ACS Appl Energy Mater, 2022, 5: 6936–694210.1021/acsaem.2c00587 ↗
29. Yang WS, Noh JH, Jeon NJ, et al. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange. Science, 2015, 348: 1234–123710.1126/science.aaa9272 ↗
30. Bi D, Yi C, Luo J, et al. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%. Nat Energy, 2016, 1: 1614210.1038/nenergy.2016.142 ↗
31. Liang PW, Liao CY, Chueh CC, et al. Additive enhanced crystallization of solution-processed perovskite for highly efficient planarheterojunction solar cells. Adv Mater, 2014, 26: 3748–375410.1002/adma.201400231 ↗
32. Xiao Z, Dong Q, Bi C, et al. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement. Adv Mater, 2014, 26: 6503–650910.1002/adma.201401685 ↗
33. Fang Z, Yan N, Liu SF. Modulating preferred crystal orientation for efficient and stable perovskite solar cells—From progress to perspectives. InfoMat, 2022, 4: e1236910.1002/inf2.12369 ↗
34. Bu T, Li J, Li H, et al. Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules. Science, 2021, 372: 1327–133210.1126/science.abh1035 ↗
35. Li N, Niu X, Li L, et al. Liquid medium annealing for fabricating durable perovskite solar cells with improved reproducibility. Science, 2021, 373: 561–56710.1126/science.abh3884 ↗
36. Zuo C, Ding L. Modified PEDOT layer makes a 1.52 V Voc for perovskite/PCBM solar cells. Adv Energy Mater, 2017, 7: 160119310.1002/aenm.201601193 ↗
37. Yang D, Yang R, Wang K, et al. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2. Nat Commun, 2018, 9: 323910.1038/s41467-018-05760-x ↗
38. You J, Meng L, Song TB, et al. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers. Nat Nanotech, 2016, 11: 75–8110.1038/nnano.2015.230 ↗
39. Kong J, Shin Y, Röhr JA, et al. CO2 doping of organic interlayers for perovskite solar cells. Nature, 2021, 594: 51–5610.1038/s41586-021-03518-y ↗
40. Jung EH, Jeon NJ, Park EY, et al. Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene). Nature, 2019, 567: 511–51510.1038/s41586-019-1036-3 ↗
41. Jeong M, Choi IW, Go EM, et al. Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss. Science, 2020, 369: 1615–162010.1126/science.abb7167 ↗
42. Chen B, Rudd PN, Yang S, et al. Imperfections and their passivation in halide perovskite solar cells. Chem Soc Rev, 2019, 48: 3842–386710.1039/C8CS00853A ↗
43. Cao J, Yan F. Recent progress in tin-based perovskite solar cells. Energy Environ Sci, 2021, 14: 1286–132510.1039/D0EE04007J ↗
44. Jena AK, Kulkarni A, Miyasaka T. Halide perovskite photovoltaics: Background, status, and future prospects. Chem Rev, 2019, 119: 3036–310310.1021/acs.chemrev.8b00539 ↗
45. Bai Y, Meng X, Yang S. Interface engineering for highly efficient and stable planar p-i-n perovskite solar cells. Adv Energy Mater, 2018, 8: 170188310.1002/aenm.201701883 ↗
46. Ali F, Roldán-Carmona C, Sohail M, et al. Applications of self-assembled monolayers for perovskite solar cells interface engineering to address efficiency and stability. Adv Energy Mater, 2020, 10: 200298910.1002/aenm.202002989 ↗
47. Pham HD, Yang TCJ, Jain SM, et al. Development of dopant-free organic hole transporting materials for perovskite solar cells. Adv Energy Mater, 2020, 10: 190332610.1002/aenm.201903326 ↗
48. Werner J, Geissbühler J, Dabirian A, et al. Parasitic absorption reduction in metal oxide-based transparent electrodes: Application in perovskite solar cells. ACS Appl Mater Interfaces, 2016, 8: 17260–1726710.1021/acsami.6b04425 ↗
49. Eggimann HJ, Patel JB, Johnston MB, et al. Efficient energy transfer mitigates parasitic light absorption in molecular charge-extraction layers for perovskite solar cells. Nat Commun, 2020, 11: 552510.1038/s41467-020-19268-w ↗
50. Mailoa JP, Bailie CD, Johlin EC, et al. A 2-terminal perovskite/silicon multijunction solar cell enabled by a silicon tunnel junction. Appl Phys Lett, 2015, 106: 12110510.1063/1.4914179 ↗
51. Werner J, Walter A, Rucavado E, et al. Zinc tin oxide as high-temperature stable recombination layer for mesoscopic perovskite/silicon monolithic tandem solar cells. Appl Phys Lett, 2016, 109: 23390210.1063/1.4971361 ↗
52. Peng J, Duong T, Zhou X, et al. Efficient indium-doped TiOx electron transport layers for high-performance perovskite solar cells and perovskite-silicon tandems. Adv Energy Mater, 2017, 7: 160176810.1002/aenm.201601768 ↗
53. Wu YL, Yan D, Peng J, et al. Monolithic perovskite/silicon-homojunction tandem solar cell with over 22% efficiency. Energy Environ Sci, 2017, 10: 2472–247910.1039/C7EE02288C ↗
54. Shen H, Omelchenko ST, Jacobs DA, et al. In situ recombination junction between p-Si and TiO2 enables high-efficiency monolithic perovskite/Si tandem cells. Sci Adv, 2018, 4: eaau971110.1126/sciadv.aau9711 ↗
55. Jiang F, Liu T, Luo B, et al. A two-terminal perovskite/perovskite tandem solar cell. J Mater Chem A, 2016, 4: 1208–121310.1039/C5TA08744A ↗
56. Heo JH, Im SH. CH3NH3PbBr3-CH3NH3PbI3 perovskite-perovskite tandem solar cells with exceeding 2.2 V open circuit voltage. Adv Mater, 2016, 28: 5121–512510.1002/adma.201501629 ↗
57. Forgács D, Gil-Escrig L, Pérez-Del-Rey D, et al. Efficient monolithic perovskite/perovskite tandem solar cells. Adv Energy Mater, 2017, 7: 160212110.1002/aenm.201602121 ↗
58. Ávila J, Momblona C, Boix P, et al. High voltage vacuum-deposited CH3NH3PbI3-CH3NH3PbI3 tandem solar cells. Energy Environ Sci, 2018, 11: 3292–329710.1039/C8EE01936C ↗
59. Correa Baena JP, Steier L, Tress W, et al. Highly efficient planar perovskite solar cells through band alignment engineering. Energy Environ Sci, 2015, 8: 2928–293410.1039/C5EE02608C ↗
60. Ke W, Fang G, Liu Q, et al. Low-temperature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells. J Am Chem Soc, 2015, 137: 6730–673310.1021/jacs.5b01994 ↗
61. Albrecht S, Saliba M, Correa Baena JP, et al. Monolithic perovskite/silicon-heterojunction tandem solar cells processed at low temperature. Energy Environ Sci, 2016, 9: 81–8810.1039/C5EE02965A ↗
62. Fan R, Zhou N, Zhang L, et al. Toward full solution processed perovskite/Si monolithic tandem solar device with PCE exceeding 20%. Sol RRL, 2017, 1: 170014910.1002/solr.201700149 ↗
63. Qiu Z, Xu Z, Li N, et al. Monolithic perovskite/Si tandem solar cells exceeding 22% efficiency via optimizing top cell absorber. Nano Energy, 2018, 53: 798–80710.1016/j.nanoen.2018.09.052 ↗
64. Zheng J, Lau CFJ, Mehrvarz H, et al. Large area efficient interface layer free monolithic perovskite/homo-junction-silicon tandem solar cell with over 20% efficiency. Energy Environ Sci, 2018, 11: 2432–244310.1039/C8EE00689J ↗
65. Zhu S, Hou F, Huang W, et al. Solvent engineering to balance light absorbance and transmittance in perovskite for tandem solar cells. Sol RRL, 2018, 2: 180017610.1002/solr.201800176 ↗
66. Chen B, Wang P, Li R, et al. Composite electron transport layer for efficient n-i-p type monolithic perovskite/silicon tandem solar cells with high open-circuit voltage. J Energy Chem, 2021, 63: 461–46710.1016/j.jechem.2021.07.018 ↗
67. Wang L, Song Q, Pei F, et al. Strain modulation for light-stable n-i-p perovskite/silicon tandem solar cells. Adv Mater, 2022, 34: 220131510.1002/adma.202201315 ↗
68. Xia R, Xu Y, Chen B, et al. Interfacial passivation of wide-bandgap perovskite solar cells and tandem solar cells. J Mater Chem A, 2021, 9: 21939–2194710.1039/D1TA04330G ↗
69. Hou F, Han C, Isabella O, et al. Inverted pyramidally-textured PDMS antireflective foils for perovskite/silicon tandem solar cells with flat top cell. Nano Energy, 2019, 56: 234–24010.1016/j.nanoen.2018.11.018 ↗
70. Zeng Q, Liu L, Xiao Z, et al. A two-terminal all-inorganic perovskite/organic tandem solar cell. Sci Bull, 2019, 64: 885–88710.1016/j.scib.2019.05.015 ↗
71. Ding Y, Guo Q, Geng Y, et al. A low-cost hole transport layer enables CsPbI2Br single-junction and tandem perovskite solar cells with record efficiencies of 17.8% and 21.4%. Nano Today, 2022, 46: 10158610.1016/j.nantod.2022.101586 ↗
72. Chen W, Li D, Chen X, et al. Surface reconstruction for stable monolithic all-inorganic perovskite/organic tandem solar cells with over 21% efficiency. Adv Funct Mater, 2021, 32: 210932110.1002/adfm.202109321 ↗
73. Lin R, Xiao K, Qin Z, et al. Monolithic all-perovskite tandem solar cells with 24.8% efficiency exploiting comproportionation to suppress Sn(II) oxidation in precursor ink. Nat Energy, 2019, 4: 864–87310.1038/s41560-019-0466-3 ↗
74. Xiao K, Lin R, Han Q, et al. All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm2 using surface-anchoring zwitterionic antioxidant. Nat Energy, 2020, 5: 870–88010.1038/s41560-020-00705-5 ↗
75. Yu Z, Yang Z, Ni Z, et al. Simplified interconnection structure based on C60/SnO2−x for all-perovskite tandem solar cells. Nat Energy, 2020, 5: 657–66510.1038/s41560-020-0657-y ↗
76. Bush KA, Manzoor S, Frohna K, et al. Minimizing current and voltage losses to reach 25% efficient monolithic two-terminal perovskite-silicon tandem solar cells. ACS Energy Lett, 2018, 3: 2173–218010.1021/acsenergylett.8b01201 ↗
77. Yang L, Feng J, Liu Z, et al. Record-efficiency flexible perovskite solar cells enabled by multifunctional organic ions interface passivation. Adv Mater, 2022, 34: 220168110.1002/adma.202201681 ↗
78. Xiong Z, Chen X, Zhang B, et al. Simultaneous interfacial modification and crystallization control by biguanide hydrochloride for stable perovskite solar cells with PCE of 24.4%. Adv Mater, 2022, 34: 210611810.1002/adma.202106118 ↗
79. Chen R, Cao J, Duan Y, et al. High-efficiency, hysteresis-less, UV-stable perovskite solar cells with cascade ZnO-ZnS electron transport layer. J Am Chem Soc, 2018, 141: 541–54710.1021/jacs.8b11001 ↗
80. Zhang P, Wu J, Zhang T, et al. Perovskite solar cells with ZnO electron-transporting materials. Adv Mater, 2018, 30: 170373710.1002/adma.201703737 ↗
81. Liu D, Kelly TL. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques. Nat Photon, 2013, 8: 133–13810.1038/nphoton.2013.342 ↗
82. Fang Z, Liu L, Zhang Z, et al. CsPbI2.25Br0.75 solar cells with 15.9% efficiency. Sci Bull, 2019, 64: 507–51010.1016/j.scib.2019.04.013 ↗
83. Yan L, Xue Q, Liu M, et al. Interface engineering for all-inorganic CsPbI2Br perovskite solar cells with efficiency over 14%. Adv Mater, 2018, 30: 180250910.1002/adma.201802509 ↗
84. Fang Z, Meng X, Zuo C, et al. Interface engineering gifts CsPbI2.25-Br0.75 solar cells high performance. Sci Bull, 2019, 64: 1743–174610.1016/j.scib.2019.09.023 ↗
85. Aqoma H, Imran IF, Wibowo FTA, et al. High-efficiency solution-processed two-terminal hybrid tandem solar cells using spectrally matched inorganic and organic photoactive materials. Adv Energy Mater, 2020, 10: 200118810.1002/aenm.202001188 ↗
86. Wang P, Li W, Sandberg OJ, et al. Tuning of the interconnecting layer for monolithic perovskite/organic tandem solar cells with record efficiency exceeding 21%. Nano Lett, 2021, 21: 7845–785410.1021/acs.nanolett.1c02897 ↗
87. Xie S, Xia R, Chen Z, et al. Efficient monolithic perovskite/organic tandem solar cells and their efficiency potential. Nano Energy, 2020, 78: 10523810.1016/j.nanoen.2020.105238 ↗
88. Liu L, Xiao Z, Zuo C, et al. Inorganic perovskite/organic tandem solar cells with efficiency over 20%. J Semicond, 2021, 42: 02050110.1088/1674-4926/42/2/020501 ↗
89. Gu X, Lai X, Zhang Y, et al. Organic solar cell with efficiency over 20% and VOC exceeding 2.1 V enabled by tandem with all-inorganic perovskite and thermal annealing-free process. Adv Sci, 2022, 9: 220044510.1002/advs.202200445 ↗
90. Bush KA, Bailie CD, Chen Y, et al. Thermal and environmental stability of semi-transparent perovskite solar cells for tandems enabled by a solution-processed nanoparticle buffer layer and sputtered ITO electrode. Adv Mater, 2016, 28: 3937–394310.1002/adma.201505279 ↗
91. Tan L, Wang Y, Zhang J, et al. Highly efficient flexible polymer solar cells with robust mechanical stability. Adv Sci, 2019, 6: 180118010.1002/advs.201801180 ↗
92. Cao J, Wu B, Chen R, et al. Efficient, hysteresis-free, and stable perovskite solar cells with ZnO as electron-transport layer: Effect of surface passivation. Adv Mater, 2018, 30: 170559610.1002/adma.201705596 ↗
93. Jia L, Chen M, Yang S. Functionalization of fullerene materials toward applications in perovskite solar cells. Mater Chem Front, 2020, 4: 2256–228210.1039/D0QM00295J ↗
94. Lin Y, Chen B, Zhao F, et al. Matching charge extraction contact for wide-bandgap perovskite solar cells. Adv Mater, 2017, 29: 170060710.1002/adma.201700607 ↗
95. Rajagopal A, Yang Z, Jo SB, et al. Highly efficient perovskite-perovskite tandem solar cells reaching 80% of the theoretical limit in photovoltage. Adv Mater, 2017, 29: 170214010.1002/adma.201702140 ↗
96. Chen B, Yu Z, Liu K, et al. Grain engineering for perovskite/silicon monolithic tandem solar cells with efficiency of 25.4%. Joule, 2019, 3: 177–19010.1016/j.joule.2018.10.003 ↗
97. Bush KA, Palmstrom AF, Yu ZJ, et al. 23.6%-Efficient monolithic perovskite/silicon tandem solar cells with improved stability. Nat Energy, 2017, 2: 1700910.1038/nenergy.2017.9 ↗
98. Kim CU, Yu JC, Jung ED, et al. Optimization of device design for low cost and high efficiency planar monolithic perovskite/silicon tandem solar cells. Nano Energy, 2019, 60: 213–22110.1016/j.nanoen.2019.03.056 ↗
99. Liu X, Yu H, Yan L, et al. Triple cathode buffer layers composed of PCBM, C60, and LiF for high-performance planar perovskite solar cells. ACS Appl Mater Interfaces, 2015, 7: 6230–623710.1021/acsami.5b00468 ↗
100. Wang Q, Dong Q, Li T, et al. Thin insulating tunneling contacts for efficient and water-resistant perovskite solar cells. Adv Mater, 2016, 28: 6734–673910.1002/adma.201600969 ↗