journal article·2023-03-01Open access

Study on localized corrosion behavior of hot extrusion deformed GW103K magnesium alloy

Xiaolian Liu, Ruiling Jia, Jianna Li, Wenhua Cheng, Huixia Zhang

AIP Advances· Volume 13· Issue 3

Abstract

This study investigated the corrosion behavior in the core and at the edge of the cross-section of an extruded GW103K (Mg–10Gd–3Y–0.4Zr) alloy. Equivalent stress and strain were modeled using finite element simulations. The stress and strain in the core were lower than those at the edge. The microstructure, corrosion morphology, and grain orientation of the alloy were examined using optical microscopy, scanning electron microscopy, and electron backscatter diffraction, respectively. The results showed that most grains in the core exhibited a basal plane orientation and lower surface energy, whereas those at the edge exhibited cylindrical orientations. Hydrogen evolution experiments and electrochemical tests showed that the corrosion resistance in the core was higher than that at the edge. Scanning Kelvin probe force microscopy measurements of the surface potential distribution in the cross-section revealed a large potential difference between the second-phase particles at the edge and the matrix, with obvious galvanic corrosion. The alloy core exhibited low stress and a higher content of grains with basal plane orientation, along with a small potential difference between the second-phase particles and the matrix. Thus, the corrosion resistance in the core was higher than that at the edge.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Inner Mongolia University of Technology 1 , Hohhot 010051, People’s Republic of China

School of Mechatronics Engineering, Zhong Shan Polytechnic 2 , Zhongshan 528400, People’s Republic of China

State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute (LSMRI) 3 , Qingdao 266101, People’s Republic of China

Funding

The National Nature Science Foundation of China Projects · Postgraduate Research Innovation Project · Zhengzhou High Level Talent Certificate

References (17)

Show source-provided references
1. Application status and plastic forming technology of magnesium alloys
2. Microstructure evolution and mechanical properties of a SMATed Mg alloy under in situ SEM tensile testing10.1016/j.jmst.2016.11.012 ↗
3. Magnesium alloys development towards the 21st Century10.4028/www.scientific.net/MSF.350-351.19 ↗
4. Research progress of the influence of rare earth elements on the mechanical properties of magnesium alloys
5. Effect of Gd content on high temperature mechanical properties of Mg-Gd-Y-Zr alloy10.1016/j.msea.2015.11.047 ↗
6. Formation of long-period stacking ordered phase only within grains in Mg-Gd-Y-Zn-Zr casting by friction stir processing10.1016/j.jallcom.2013.07.065 ↗
7. Hye Yoon · 1997
8. Microstructure and strengthening mechanisms of a cast Mg–1.48Gd–1.13Y–0.16Zr (at.%) alloy10.1007/s10853-009-3672-8 ↗
9. NaCl. Microstructure and corrosion resistance of Mg-5Gd-3Y-0.8Zr
10. Research progress of plastic deformation mechanism of magnesium alloy10.3724/SP.J.1037.2010.00446 ↗
11. Influence of hot rolling parameters on microstructure and biodegradability of Mg–1Ca alloy in simulated body fluid10.1016/j.matdes.2011.06.063 ↗
12. Influence of multidirectional forging on microstructural, mechanical, and corrosion behavior of Mg-Zn alloy10.1007/s11665-019-04007-0 ↗
13. L. Fengchi, “Observation on hot extrusion deformation and recrystallization mechanism of Mg-Zn-Gd alloy,” Master thesis (Shenyang University of Technology, Shenyang, 2020).
14. Effect of the crystallographic orientation and twinning on the corrosion resistance of an as-extruded Mg–3Al–1Zn (wt.%) bar10.1016/j.scriptamat.2014.06.015 ↗
15. Effects of crystallographic orientation on corrosion behavior of magnesium single crystals10.1007/s11837-012-0334-0 ↗
16. H. Xiaoping, “Local electrochemical probe study on the correlation between residual stress and stainless steel corrosion,” Master thesis (Shandong University, Jinan, 2015).
17. The effect of crystallographic orientation on the active corrosion of pure magnesium10.1016/j.scriptamat.2007.10.027 ↗