journal article·2025-10Open access

Schottky barrier height lowering and contact resistivity reduction via crystalline magnesium oxide interlayer on semiconductor surface

Seung-Hwan Kim, Yuji Yang, Daeyoon Baek, Seokwoo Jeon, Seung-heon Chris Baek, Hyung-jun Kim

Abstract

The pervasive Fermi-level (FL) pinning at semiconductor surfaces severely limits the reduction of contact resistance, posing a critical challenge to the realization of high-performance nanoelectronic devices. In particular, germanium (Ge) inherently exhibits strong FL pinning, which results in high Schottky barrier height (SBH) and large contact resistance regardless of a metal work function. Here, interfacial dipole engineering for SBH modulation is realized by introducing a metal–interlayer–semiconductor structure employing crystalline magnesium oxide (MgO) as the interlayer. The insertion of MgO suppresses metal-induced gap states (MIGS) and partially reduces interface trap density through GeO 2 formation, enabling significant FL unpinning. In addition, an extrinsic interfacial dipole is induced due to the charge neutrality level mismatch between MgO and Ge, further lowering the SBH. Crystallization of MgO enhances the passivation effect by suppressing unstable Ge suboxides and promoting stable GeO 2 formation, resulting in an ultra-low SBH (< 0.05 eV), previously unreported. Moreover, with the improved conductivity of the MgO induced by crystallization, a specific contact resistivity as low as 8.38 × 10 −9 Ω·cm 2 was achieved, corresponding to a reduction by a factor of 10 4 compared to that of a conventional metal–semiconductor contact. Also, systematic experiments using five different metals and comprehensive chemical analyses verify that both FL unpinning and extrinsic interfacial dipole formation are key mechanisms in SBH modulation. This study establishes a practical and scalable methodology for contact technique through favorable interfacial dipole formation, providing a viable pathway toward integration in next-generation nanoelectronic technologies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and devices · Semiconductor materials and interfaces · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Approaching the Schottky-Mott in van der waals Metal-Semiconductor junctions10.1038/s41586-018-0129-8 ↗
2. Schottky barrier height engineering for electrical contacts of multilayered MoS2 transistors with reduction of Metal-Induced gap states10.1021/acsnano.8b03331 ↗
3. Ultralow schottky barrier height achieved by using molybdenum Disulfide/Dielectric stack for Source/Drain contact10.1021/acsami.9b10746 ↗
4. On-Device Pressure-Tunable moving schottky contacts10.1021/acs.nanolett.4c03084 ↗
5. Metal/III-V schottky barrier height tuning for the design of nonalloyed III-V Field-Effect transistor Source/Drain contacts10.1063/1.3327434 ↗
6. Design on formation of nickel silicide by a Low-Temperature pulsed laser annealing method to reduce contact resistance for CMOS inverter and 6T-SRAM on a Wafer-Scale flexible substrate10.1002/aelm.202300353 ↗
7. Fermi-Level unpinning and low resistivity in contacts to n-Type ge with a thin ZnO interfacial layer
8. Wide range control of schottky barrier heights at Metal/Ge interfaces with Nitrogen-Contained amorphous interlayers formed during ZrN sputter deposition10.1088/1361-6641/aae4bd ↗
9. Advanced understanding of Gap-State roles at Metal/Semiconductor interfaces: schottky barrier and interface defects10.35848/1347-4065/ade4eb ↗
10. Effective schottky barrier height lowering technique for InGaAs contact scheme: dMIGS and dit reduction and interfacial dipole formation10.1016/j.apsusc.2018.05.070 ↗
11. Fermi level depinning in Metal/Ge schottky junction for metal Source/Drain ge Metal-Oxide-Semiconductor field Effect-Transistor application
12. Alleviation of Fermi-Level pinning effect on Metal/Germanium interface by insertion of an ultrathin aluminum oxide10.1063/1.3028343 ↗
13. Increase in current density for metal contacts to n-Germanium by inserting TiO2 interfacial layer to reduce schottky barrier height10.1063/1.3562305 ↗
14. Specific contact resistivity reduction through ar Plasma-Treated TiO2-x interfacial layer to Metal/Ge contact10.1109/LED.2014.2354679 ↗
15. Novel conductive filament Metal-Interlayer-Semiconductor contact structure for ultralow contact resistance achievement10.1021/acsami.8b07066 ↗
16. Surface passivation of germanium using SF6 plasma to reduce Source/Drain contact resistance in germanium n-FET10.1109/LED.2015.2440434 ↗
17. Non-Alloyed ohmic contacts on GaAs using Metal-Interlayer-Semiconductor structure with SF6 plasma treatment10.1109/LED.2016.2524470 ↗
18. Atomic structure and electronic properties of MgO grain boundaries in tunnelling magnetoresistive devices10.1038/srep45594 ↗
19. Microstructural characterization of MgO thin films grown by Radio-Frequency sputtering. Target and Substrate-Temperature effect10.1063/1.1558964 ↗
20. Strongly (001)-Textured MgO/Co40Fe40B20 Spin-Tunnel contact on n-Ge(001) and its spin accumulation: structural modification with ultrathin mg insertion by sputtering10.7567/APEX.9.043005 ↗
21. Characterization of growth and crystallization processes in CoFeB/MgO/CoFeB magnetic tunnel junction structure by reflective High-Energy electron diffraction10.1063/1.2140612 ↗
22. Multiring circular transmission line model for ultralow contact resistivity extraction10.1109/LED.2015.2425792 ↗
23. International Roadmap for Devices and Systems (IRDS™) 2024 Edition – IEEE IRDSTM [WWW Document], n.d. URL 〈https://irds.ieee.org/editions/2025〉.
24. Analytical study of interfacial layer doping effect on contact resistivity in Metal-Interfacial Layer-Ge structure10.1109/LED.2014.2323256 ↗
25. Universal Metal-Interlayer-Semiconductor contact modeling considering Interface-State effect on contact resistivity degradation
26. Sze · 2008
27. The effect of interfacial dipoles on the Metal-Double Interlayers-Semiconductor structure and their application in contact resistivity reduction10.1021/acsami.6b10376 ↗
28. Schottky barrier engineering with a metal Nitride-Double Interlayer-Semiconductor contact structure to achieve high thermal stability and ultralow contact resistivity10.1016/j.apsusc.2020.147329 ↗
29. Evidence of low interface trap density in GeO2/Ge Metal-Oxide-Semiconductor structures fabricated by thermal oxidation10.1063/1.2959731 ↗
30. Effective schottky barrier height lowering of Metal/n-Ge with a TiO2/GeO2 interlayer stack10.1021/acsami.6b10947 ↗
31. Effect of hydrogen annealing on contact resistance reduction of Metal-Interlayer-n-Germanium Source/Drain structure
32. Energy band structure of the single crystalline MgO/n-Ge(001) heterojunction determined by X-Ray photoelectron spectroscopy10.1063/1.3486116 ↗
33. An interface dipole predictive model for High-K Dielectric/Semiconductor heterostructures using the concept of the dipole neutrality point10.1039/c2jm32589f ↗
34. Experimental investigation on dipole and band offset affected by charge neutrality level modulation10.1007/s00339-022-05886-2 ↗
35. Origin of fixed charges and dipole in GeOx/Al2O3 gate stack based on ge
36. Thermal desorption of ge native oxides and loss of ge from the surface10.1016/j.mssp.2010.10.009 ↗