Bromine-defect induced high sensitivity of Cs4PbBr6 nanocrystals humidity sensor
Source abstract
Abstract
Recently, all-inorganic halide perovskite materials have attracted much attention in the fields of humidity sensor due to their sensitive surface, tunable bandgap, high conductivity and excellent carrier mobility. However, their inherent instability and limited sensitivity restrict further application in electronic devices. Herein, we demonstrate a high-performance impedimetric humidity sensor based on an all-inorganic halide perovskite Cs 4PbBr 6 nanocrystals (NCs), which are obtained by anti-solvent method without long chain ligands. It is found that V Br ∙ defects act as the active site to enhance the ability of adsorbing water molecules. The humidity sensor of Cs 4PbBr 6 NCs achieves high response value over 4 orders of magnitude at 11–98 % relative humidity, short response/recovery time (8 s/6 s), favorable repeatability, excellent selectivity and good long-term stability. Moreover, high humidity sensing performance enables the humidity sensor of Cs 4PbBr 6 NCs to possess great potentials in breath monitor and noncontact switch application.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Study of intermolecular reconfiguration of flexible COF-5 film and its ultra-high chemiresistive humidity sensitivity10.1002/anie.202301440 ↗
2. Advances in humidity nanosensors and their application: review10.3390/s23042328 ↗
3. Defect-rich ultrathin Sn2O3 nanosheets with dominant polar (100) facets for efficient gas and humidity sensor applications10.1016/j.snb.2021.130816 ↗
4. Ppb level ammonia detection of 3-D PbS quantum dots/reduced graphene oxide nanococoons at room temperature and Schottky barrier modulated behavior10.1016/j.snb.2017.09.120 ↗
5. Acidic site-assisted ammonia sensing of novel CuSbS2 quantum dots/reduced graphene oxide composites with an ultralow detection limit at room temperature10.1021/acsami.8b20830 ↗
6. Highly sensitive and selective ammonia gas sensors based on PbS quantum dots/TiO2 nanotube arrays at room temperature10.1016/j.snb.2016.06.037 ↗
7. Polymer based optical humidity and temperature sensor
8. Recent trends of ceramic humidity sensors development: a review10.1016/j.snb.2016.01.015 ↗
9. Three-terminal perovskite/integrated back contact silicon tandem solar cells under low light intensity conditions
10. Monolithic bilayered In2O3 as an efficient interfacial material for high-performance perovskite solar cells
11. Humidity sensing applications of lead-free halide perovskite nanomaterials10.3390/ma15124146 ↗
12. Point defects and green emission in zero-dimensional perovskites10.1021/acs.jpclett.8b02477 ↗
13. All-inorganic lead-free halide perovskite Cs2TeBr6 enables real-time touchless human breath and finger related humidity monitoring10.1016/j.snb.2022.133240 ↗
14. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via Lewis base adduct of lead(II) iodide10.1021/jacs.5b04930 ↗
15. CsPbBr3-DMSO merged perovskite micro-bricks for efficient X-ray detection10.1007/s12274-023-5487-3 ↗
16. Substitution of Pb with Mn2+/Nd3+ to improve the luminescence and thermal stability of Cs4PbBr610.1016/j.cej.2021.130186 ↗
17. Single-solvent, ligand-free, gram-scale synthesis of Cs4PbBr6 perovskite solids with robust green photoluminescence10.1002/cnma.201900604 ↗
18. Solvent evaporation induced large-scale synthesis of Cs4PbBr6 and CsPbBr3 microcrystals: optical properties and backlight application for LEDs10.1021/acsomega.2c05862 ↗
19. Improvement in optical properties of Cs4PbBr6 nanocrystals using aprotic polar purification solvent10.1039/D1RA01702K ↗
20. Intrinsic lead ion emissions in zero-dimensional Cs4PbBr6 nanocrystals10.1021/acsenergylett.7b01026 ↗
21. Synthesis and luminescence of ultrasmall CsPbBr3 nanocrystals and CsPbBr3/Cs4PbBr6 composites by one-pot method10.1007/s12598-021-01856-4 ↗
22. Solution-processed quasi-two-dimensional/nanocrystals perovskite composite film enhances the efficiency and stability of perovskite light-emitting diodes10.1021/acsami.0c07547 ↗
23. Fast response resistive humidity sensitivity of polyimide/multiwall carbon nanotube composite films10.1016/j.snb.2010.09.016 ↗
24. A flexible humidity sensor based on KC-MWCNTs composites10.1016/j.apsusc.2016.05.108 ↗
25. The effect of DC polarization on the humidity sensing characteristics of bismuth iron molybdate10.1016/j.snb.2004.11.029 ↗
26. X. Hu, Highly stable humidity sensor based on lead-free Cs3Bi2Br9 perovskite for breath monitoring10.1039/D1TC02339J ↗
27. Lead-free Cs2BiAgBr6 double perovskite-based humidity sensor with superfast recovery time10.1002/adfm.201902234 ↗
28. A reversible and fast-responsive humidity sensor based on a lead-free Cs2TeCl6 double perovskite10.1039/D0MA00835D ↗
29. An ultra-sensitive humidity sensor based on lead-free halide perovskite Cs2TeI6 for real-time human breath and finger monitoring10.1016/j.matlet.2022.133747 ↗
30. A high-performance impedimetric humidity sensor based on lead-free halide perovskite Cs2TeCl610.1016/j.sna.2023.114153 ↗
31. All-inorganic lead-free halide perovskite Cs2TeBr6 enables real-time touchless human breath and finger related humidity monitoring10.1016/j.snb.2022.133240 ↗
32. An excellent impedance-type humidity sensor based on halide perovskite CsPbBr3 nanoparticles for human respiration monitoring10.1016/j.snb.2021.129772 ↗
33. Preparation and mechanism investigation of highly sensitive humidity sensor based on Ag/TiO210.1016/j.cap.2022.08.006 ↗
34. Electrical conductivity of silica gel in the presence of adsorbed water10.1021/j100856a051 ↗
35. A guest/host composite of Fe(NO3)3/nanoporous polytriphenylamine assembly for humidity sensor10.1016/j.snb.2015.08.004 ↗
36. The Grotthuss mechanism10.1016/0009-2614(95)00905-J ↗
37. Influence of annealing temperature on morphological and magnetic properties of La0.9Sr0.1MnO310.1016/j.apsusc.2011.06.126 ↗
38. M. Ling, Investigations on the ion transport mechanism in conducting polymer films10.1016/S0167-2738(00)00688-3 ↗