Tailoring breakdown behaviour in BST-xMgO ceramics for energy storage applications
Source abstract
Abstract
In this study, Ba₀.₆₅Sr₀.₃₅TiO₃–xMgO ceramics with x = 0, 1, 3, and 5 wt% (abbreviated as BST, BST-1M, BST-3M, and BST-5M, respectively) were successfully synthesized via the conventional solid-state route. XRD study confirmed the phase purity with tetragonal perovskite structure with space group P4mm, while FESEM study revealed the enhanced grain growth and reduced porosity in BST-1M and BST-3M samples, which was found to be in correlation with density measurement, where density increased from 5.35 gm/cc to 5.40 gm/cc in BST-1M. Dielectric study showed good thermal stability upto 45° C under TCC performance, whereas Yamada model provided the best dielectric fitting to present experimental data. Ferroelectric analysis confirmed improved polarization and breakdown strength with the increase of MgO addition, which was attributed to MgO-induced grain enhancement and increased bandgap. Notably, BST-1M ceramics exhibited high total energy density (∼3.1 J/cm³), and BST-3M ceramics exhibited excellent recoverable energy (W rec ∼1.28 J/cm³) with ∼73.56 % efficiency at E b ∼ 190 kV/cm. Breakdown strength (E b ) increased from ∼ 120 kV/cm ( BST) to ∼ 220 kV/cm (BST-5M). Optimum W rec /E b ratio of BST-1M, BST-3M ceramics further demonstrated their superior performance at lower fields, making them suitable for embedded capacitors, flexible electronics, and low-power tunable RF devices.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Electroceramics for High-Energy density capacitors: current status and future perspectives10.1021/acs.chemrev.0c01264 ↗
2. High-performance lead-free bulk ceramics for electrical energy storage applications: design strategies and challenges10.1039/D1TA04504K ↗
3. Investigation of structural, morphological, dielectric, optical, and ferroelectric-energy storage properties of [(1-x) BCT-(x) BZT] electroceramics10.1016/j.jallcom.2024.174817 ↗
4. Optimization the energy density and efficiency of BaTiO3-based ceramics for capacitor applications10.1016/j.cej.2020.127375 ↗
5. Low-loss dielectric ceramic materials and their properties10.1179/1743280415Y.0000000007 ↗
6. Dielectric breakdown of oxide films in electronic devices10.1038/s41578-024-00702-0 ↗
7. Ceramic-based dielectrics for electrostatic energy storage applications: fundamental aspects, recent progress, and remaining challenges10.1016/j.cej.2022.136315 ↗
8. Additive manufacture of low melting point metal porous materials: capabilities, potential applications and challenges10.1016/j.mattod.2021.03.019 ↗
9. Preparation of glass by sintering10.1007/BF00559317 ↗
10. MgO-modified Sr0.7Ba0.3Nb2O6 ceramics for energy storage applications10.1016/j.ceramint.2018.03.069 ↗
11. Energy storage properties of MgO-doped 0.5Bi0·5Na0·5TiO3-0.5SrTiO3 ceramics10.1016/j.ceramint.2019.04.227 ↗
12. Enhanced energy storage density of Ba0.4Sr0.6TiO3–MgO composite prepared by spark plasma sintering10.1016/j.jeurceramsoc.2014.11.022 ↗
13. Energy storage density and tunable dielectric properties of BaTi0.85Sn0.15O3/MgO composite ceramics prepared by SPS10.1016/j.jeurceramsoc.2016.12.016 ↗
14. Antiferroelectric-like properties in MgO-modified 0.775Na0.5Bi0.5TiO3-0.225BaSnO3 ceramics for high power energy storage10.1016/j.jeurceramsoc.2018.08.010 ↗
15. Lattice instabilities in metallic elements10.1103/RevModPhys.84.945 ↗
16. Synthesis mechanisms and effects of BaTiO3 doping on the optical properties of Bi0.5Na0.5TiO3 lead-free ceramics10.1016/j.jssc.2022.122940 ↗
17. In-plane thermal expansion behavior of dense ceramic matrix composites containing SiBC matrix10.1016/j.jeurceramsoc.2020.03.006 ↗
18. Constructing layered structures to enhance the breakdown strength and energy density of na 0.5 bi 0.5 TiO 3 -based lead-free dielectric ceramics10.1039/C9TC05637H ↗
19. Using variable temperature powder X-ray diffraction to determine the thermal expansion coefficient of solid MgO10.1021/ed084p818 ↗
20. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides
21. Effect of MgO on structure and nonlinear dielectric properties of Ba0. 6Sr0. 4TiO3/MgO composite ceramics prepared from superfine powders10.1016/j.jallcom.2009.08.153 ↗
22. MgO-mixed ba 0.6 sr 0.4 TiO 3 bulk ceramics and thin films for tunable microwave applications10.1063/1.1505669 ↗
23. Phonon mode and dielectric function dynamics of Bi0. 5Na0. 5TiO3-xSm2Ti2O7 ceramics during the phase transitions discovered by Raman scattering and spectroscopic ellipsometry10.1063/5.0182703 ↗
24. The unique nature of Mg2+ channels10.1152/physiol.00019.2008 ↗
25. Study of microstructural, mechanical, and biomedical properties of zirconia/hydroxyapatite ceramic composites10.1016/j.ceramint.2022.01.102 ↗
26. Structural and functional adaptive artificial bone: materials, fabrications, and properties10.1002/adfm.202214726 ↗
27. Role of grain boundaries in sintering10.1111/j.1151-2916.1957.tb12580.x ↗
28. Melting point of MgO10.1063/1.1398069 ↗
29. Novel stable compounds in the Mg–O system under high pressure10.1039/c3cp50678a ↗
30. Sintering characteristics and grain growth behavior of MgO nanopowders by spark plasma sintering10.1016/j.jallcom.2014.04.148 ↗
31. Effect of dopants on electrical properties of BCT-BZT lead free piezo ceramics: a review10.1080/00150193.2021.1951034 ↗
32. High energy storage capability of perovskite relaxor ferroelectrics via hierarchical optimization10.1007/s12598-021-01869-z ↗
33. Quantitative framework development for understanding the relationship between doping and photoelectrochemical energy conversion of TiO 210.1039/D3MA00059A ↗
34. Dielectric response and impedance spectroscopy of (Na0. 5Bi0. 5) 0.95 Ba0. 05Zr0. 04Ti0. 96O3 ferroelectric ceramic10.1142/S2010135X12500191 ↗
35. A comparative study on the structural, dielectric and multiferroic properties of Co0. 6Cu0. 3Zn0. 1Fe2O4/Ba0. 9Sr0. 1Zr0. 1Ti0. 9O3 composite ceramics10.1016/j.compositesb.2018.12.010 ↗
36. Influence of core size on the multiferroic properties of CoFe2O4@ BaTiO3 core shell structured composites10.1016/j.ceramint.2018.08.234 ↗
37. Enhancement of magnetoelectric properties of (1-x) Mn0. 5Zn0. 5Fe2O4-xBa0. 85Sr0. 15Ti0. 9Hf0. 1O3 composite ceramics10.1016/j.jallcom.2019.05.013 ↗
38. The effect of sintering parameters and MgO ratio on structural properties in Al7075/MgO composites: a review10.1007/s10853-022-08003-z ↗
39. Effect of MgO on structure and nonlinear dielectric properties of Ba0. 6Sr0. 4TiO3/MgO composite ceramics prepared from superfine powders10.1016/j.jallcom.2009.08.153 ↗
40. High dielectric constant oxides10.1051/epjap:2004206 ↗
41. Ferroelectric, piezoelectric mechanism and applications10.1080/21870764.2022.2075618 ↗
42. Investigation of the effect of Sr-substitution on the structural, morphological, dielectric, and energy storage properties of BaTiO3-based perovskite ceramics10.1016/j.inoche.2022.109225 ↗
43. The effect of sintering parameters and MgO ratio on structural properties in Al7075/MgO composites: a review10.1007/s10853-022-08003-z ↗
44. The Large-Scale manufacturing of polymer dielectric capacitors: advancements and challenges
45. Fulfilling X9R specification in CeO2 modified BNBST-based relaxor ferroelectric energy storage ceramic capacitors10.1016/j.ceramint.2024.03.038 ↗
46. Microstructural, dielectric, mechanical, and biological properties of hydroxyapatite (HAp)/BZT-BCT (0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3) bio-composites with improved mechano-electrical properties for bone repair10.1016/j.ceramint.2022.05.084 ↗
47. Recent advances in metal titanate-based piezocatalysts: enhancing catalytic performance through improved piezoelectric properties and regulated carrier transport10.1016/S1872-2067(23)64635-2 ↗
48. Ferroelectric-like metallic state in electron doped BaTiO310.1038/srep13207 ↗
49. Magnesium-Induced phase transition and enhanced dielectric performance in ((Ba₀. ₈₅Sr₀. ₁₅) ₁₋ ₓMgₓTiO₃) ceramics synthesized by the Sol-Gel method10.1016/j.rineng.2025.105763 ↗
50. Electron transfer at oxide surfaces. The MgO paradigm: from defects to ultrathin films10.1021/cr3002017 ↗
51. A review on alkaline earth metal titanates for applications in photocatalytic water purification10.1016/j.cej.2020.128110 ↗
52. A review on polymeric insulation for high-voltage application under various stress conditions10.1002/pc.26793 ↗
53. Ultrahigh energy storage density, high efficiency and superior thermal stability in bi 0.5 na 0.5 TiO 3 -based relaxor ferroelectric ceramics via constructing multiphase structures10.1039/D3TA00068K ↗
54. Debye-like relaxation behavior and electric field induced dipole re-orientation of the 0.6 BaTiO3-0.4 bi (Mg1/2Ti1/2) O3 ceramic10.1016/j.ceramint.2017.10.024 ↗
55. Phase structure, dielectric properties, and relaxor behavior of (K0. 5Na0. 5) NbO3–(Ba0. 5Sr0. 5) TiO3 lead-free solid solution for high temperature applications
56. Exploring energy storage characteristics of lead-free [(Na1− 3x/2Bi3x/2)(Nb1− xSrx) O3] ceramics
57. Review on energy storage in lead-free ferroelectric films10.1002/est2.359 ↗
58. Energy storage properties of samarium-doped bismuth sodium titanate-based lead-free ceramics10.1016/j.cej.2023.145363 ↗
59. Significant advancements in energy density of NN-based anti-ferroelectric material: a breakthrough in low electric field region design strategies10.1016/j.cej.2024.158942 ↗
60. Advancing energy storage properties in barium titanate-based relaxor ferroelectric ceramics through a stagewise optimization strategy10.1016/j.cej.2024.151043 ↗
61. Effect of SiO 2 additive on dielectric response and energy storage performance of ba 0.4 sr 0.6 TiO 3 ceramics10.1016/j.ceramint.2016.04.169 ↗
62. Synthesis and electrical characterization of cold sintered Ba0.7Sr0.3TiO3–PVDF ceramic nanocomposites for capacitive energy storage applications10.1007/s10854-023-11358-x ↗
63. Temperature stability of lead-free BST-BZN relaxor ferroelectric ceramics for energy storage capacitors10.1007/s10854-020-04854-x ↗
64. High energy-storage performance of lead-free Ba0.4Sr0.6TiO3–Sr0.7Bi0.2TiO3 relaxor-ferroelectric ceramics with ultrafine grain size10.1016/j.ceramint.2021.09.292 ↗
65. High energy storage performance of (1-x)Ba0.5Sr0.5TiO3-xK0.5Na0.5NbO3 ceramics via a combined strategy of fine grains and multiphase polar nanoregions10.1016/j.cej.2024.150441 ↗
66. Multiscale modulation strategy for achieving superior energy storage performance in Ba0.6Sr0.4TiO3 based relaxor ferroelectrics10.1016/j.ceramint.2024.12.151 ↗
67. Energy storage and discharge performance for (1− x)BaSrTiO 3 − x Bi(Zn 1/2 Ti 1/2)O 3 ceramics10.1111/ijac.14680 ↗
68. Excellent energy storage properties in ZrO2 toughened Ba0.55Sr0.45TiO3-based relaxor ferroelectric ceramics via multi-scale synergic regulation10.1016/j.cej.2024.152624 ↗
69. Energy storage performance of lead-free Ba0.7Sr0.3TiO3 ceramics with doping Bi(Mg0.5Ti0.5)O310.1016/j.mssp.2023.108046 ↗
70. Dielectric temperature stability and energy storage performance of BST-based lead-free ceramics for X8R capacitors10.1007/s10854-023-11762-3 ↗
71. Enhanced energy storage properties of (Ba0.4Sr0.6)TiO3 ceramics with ultrahigh energy efficiency through doping of Bi0.2Sr0.7(Mg1/3Nb2/3)O310.1016/j.ceramint.2024.03.078 ↗
72. Transformation of Ba0.7Sr0.3TiO3 from ferroelectrics to relaxor ferroelectrics by doping of Bi(Mg0.5Sn0.5) and realization of high energy storage10.1007/s10854-024-11986-x ↗
73. Enhanced energy storage properties with excellent stability in BST-BLZS relaxor ceramics10.1016/j.ceramint.2022.03.233 ↗
74. Influence of Sr/Ba ratio on the energy storage properties and dielectric relaxation behaviors of strontium barium titanate ceramics10.1007/s10854-013-1368-y ↗
75. Dielectric properties and energy storage density in ZnO-doped Ba0.3Sr0.7TiO3 ceramics10.1016/j.ceramint.2008.11.003 ↗
76. Enhancing energy storage density of (Ba, Sr)TiO3 ceramic particles by coating with Al2O3 and SiO210.1007/s10854-013-1248-5 ↗
77. Enhanced energy storage density of ba 0.4 sr 0.6 TiO 3 ceramics with additive of bi 2 o 3 -B 2 o 3 -ZnO glass10.1016/j.matlet.2017.05.007 ↗
78. Microstructures and dielectric properties of Ba0.4Sr0.6TiO3 ceramics with BaO–TiO2–SiO2 glass–ceramics addition10.1016/j.jallcom.2013.09.072 ↗
79. Energy storage properties in ba 0.4 sr 0.6 TiO 3 ceramics with addition of semi-conductive BaO–B 2 o 3 –SiO 2 –Na 2 CO 3 –K 2 CO 3 glass10.1016/j.jallcom.2014.08.038 ↗
80. Effects of SrO–B2O3–SiO2 glass additive on densification and energy storage properties of Ba0.4Sr0.6TiO3 ceramics10.1007/s10854-012-0635-7 ↗
81. Enhanced energy storage density of Ba0.4Sr0.6TiO3–MgO composite prepared by spark plasma sintering10.1016/j.jeurceramsoc.2014.11.022 ↗