The microstructural evolution of isotropic graphite under silicon vapor infiltration
Source abstract
Abstract
As the key crucible material in the third-era semiconductor SiC crystal furnace, isotropic graphite is plagued by silicon vapor corrosion, which severely restricts its service life. The microstructure of graphite is considered to be an important factor that affect the service lifespan. However, the interdependence between the key factors of silicon vapor infiltration and the microstructure of graphite has rarely been addressed. In this paper, two kinds of lab-made graphite blocks, named as GCAS1 and GCAS2, based on mesocarbon microbead (MCMB) (graphite powder as an additive at 0 and 5 %, respectively) were compared with commercial-achieved SGL6510 using coke and pitch as raw materials. It was found that pore structure and interface play an important role in preventing silicon vapor infiltration. The smaller porosity and average pore diameter of GCAS1 (12.8 % and 0.64 μm) and GCAS2 (10.5 % and 0.44 μm) endow them with better resistance to silicon vapor corrosion, leading to reduced infiltration depths (125–170 μm for GCAS1, 110–150 μm for GCAS2, 140–205 μm for SGL6510). Furthermore, we found that significant silicon vapor infiltration was noticed at the poorly bonded interfaces, while negligible silicon vapor deposition was seen at the tightly bonded interfaces. Our work demonstrated that optimizing microstructure via pore modulation and interface bonding engineering would be an effective approach to improve resistance to silicon vapor corrosion.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphite, nuclear technology, radiation studies · Graphene research and applications · Silicon Carbide Semiconductor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Comparative evaluation of voltage source converters with silicon carbide semiconductor devices for high-voltage direct current transmission10.1109/TPEL.2021.3049320 ↗
2. Evaluation of potentials for performance improvement of inverter and DC–DC converter systems by sic power semiconductors10.1109/TIE.2010.2072896 ↗
3. Role of the growth facet on the generation and expansion of stacking faults in PVT-grown n-type 4H-SiC single-crystal boules10.1021/acs.jpcc.3c01502 ↗
4. Mechanisms of graphite crucible degradation in contact with Si–Al melts at high temperatures and vacuum conditions10.1016/j.vacuum.2019.108993 ↗
5. Mechanical activation of graphite in air: A way to advanced carbon nanomaterials10.1016/j.jallcom.2015.05.090 ↗
6. Directional solidification of photovoltaic silicon in re-useable graphite crucibles10.1016/j.solmat.2020.110637 ↗
7. The crucible/silicon interface in directional solidification of photovoltaic silicon10.1016/j.actamat.2017.02.072 ↗
8. Study of the oxidation behavior of fine-grained graphite et-10 by combining x-ray μct with mercury porosimetry10.3390/nano12244354 ↗
9. Growth of SiC polytypes by the physical vapour transport technique
10. Fine-grained graphite with super molten salt barrier property produced from filler of natural graphite flake by a liquid-phase mixing process10.1016/j.carbon.2019.01.029 ↗
11. Research on the mechanism model of carbon composite material damaged by erosion in the thermal field of single crystal silicon furnace10.1088/1755-1315/632/5/052089 ↗
12. Growth and defect formation mechanism of CVD-prepared SiC coatings based on cross-scale simulation
13. Microstructure and oxidation behaviors of dense mullite‑silicon carbide‑silicon coating for graphite fabricated by dipping-pyrolysis and reactive infiltration10.1016/j.surfcoat.2018.07.041 ↗
14. Oxidation and ablation protection of double layer HfB2-SiC-Si/SiC-Si coating for graphite materials10.1016/j.jallcom.2018.12.256 ↗
15. Synthesis and characterization of non-oxide ceramic coatings on graphite substrates by solid-vapor reaction process10.1016/j.porgcoat.2007.09.033 ↗
16. Corrosion of SiC-coated graphite susceptor by NH3 and Cl210.1016/j.ceramint.2021.10.208 ↗
17. Comparison of ultrafine-grain isotropic graphite prepared from microcrystalline graphite and pitch coke10.1016/j.fuel.2020.120055 ↗
18. Prospective life cycle assessment of synthetic graphite manufactured via electrochemical graphitization10.1021/acssuschemeng.2c02937 ↗
19. Preparation of mesocarbon microbeads from coal tar pitch with blending of biomass tar pitch10.1016/j.jaap.2021.105039 ↗
20. Homogenous and highly isotropic graphite produced from mesocarbon microbeads10.1016/j.carbon.2015.06.034 ↗
21. Improving the self-sintering of mesocarbon-microbeads for the manufacture of high performance graphite-parts10.1016/j.carbon.2011.09.052 ↗
22. Self-sinterability of mesocarbon microbeads (MCMB) for preparation of high-density isotropic carbon10.1023/A:1023740517269 ↗
23. Structural order evaluation and structural evolution of coal derived natural graphite during graphitization10.1016/j.carbon.2019.10.104 ↗
24. An investigation of heterogeneity of the degree of graphitization in carbon-carbon composites10.1016/S0254-0584(03)00332-8 ↗
25. RELATIONSHIPS BETWEEN INTERLAYER SPACING STACKING ORDER AND CRYSTALLINITY IN CARBON MATERIALS10.1107/S0021889868004978 ↗
26. Raman microspectroscopy of soot and related carbonaceous materials: Spectral analysis and structural information10.1016/j.carbon.2005.02.018 ↗
27. Influence of filler type on the performance and microstructure of a carbon/graphite material10.1016/S1872-5805(09)60035-4 ↗
28. Effect of heating rate, temperature, and residence time during graphitization on the mechanical and electrical properties of isotropic graphite blocks10.1016/j.carbon.2023.03.069 ↗
29. A review of the coefficient of thermal expansion and thermal conductivity of graphite10.1016/S1872-5805(22)60603-6 ↗
30. Effect of pore structure on the thermophysical and frictional properties of high-density graphite10.1016/j.micromeso.2021.111613 ↗
31. Effect of microstructure and temperature on nuclear graphite oxidation using the 3D Random Pore Model10.1016/j.carbon.2022.01.041 ↗
32. Effect of β-resin of binderless coke on mechanical properties of high-density carbon blocks at high molding pressure
33. Effect of oxidative stabilization on the sintering of mesocarbon microbeads and a study of their carbonization10.1016/j.carbon.2011.03.044 ↗
34. Nucleation and growth of SiC at the interface between molten Si and graphite10.1016/j.ceramint.2023.03.126 ↗