Thermoelectric properties and effective medium theory analysis on the (GeTe)1-x(InTe)x composites
Source abstract
Abstract
We employed the p-type semiconductor InTe as an extrinsic phase mixing in the GeTe matrix for thermoelectric properties investigations on the (GeTe) 1-x(InTe) x (x=0, 0.02, 0.04, 0.06, and 0.08) composites. We observed notable phenomena that a small amount of InTe has a significant influence on the thermoelectric properties as the primary host matrix in the (GeTe) 1-x(InTe) x (x=0.02, 0.04, 0.06, and 0.08) composites. Even for small concentrations of InTe which possess lower thermal and electrical conductivities compared to those of GeTe, the thermoelectric properties of the (GeTe) 1-x(InTe) x (x=0.02, 0.04, 0.06, and 0.08) composites are primarily influenced by the properties of InTe. We systematically elucidated the electrical conductivity of the (GeTe) 1-x(InTe) x (x=0.02, 0.04, 0.06, and 0.08) composites through the application of effective medium theory (EMT). It is found that the effective media of the (GeTe) 1-x(InTe) x (x=0.02, 0.04, 0.06, and 0.08) composites is an asymmetric medium insulator. The addition of InTe into GeTe reveals a significant decrease in total thermal conductivity due to reductions in both electronic and lattice thermal conductivity. Particularly, the decrease in lattice thermal conductivity was attributed to an increase in internal strain within the lattice induced by the addition of InTe. Consequently, the ZT values of the composite significantly increase across all temperature ranges. This study suggests that developing composites is an effective approach for enhancing thermoelectric performance, comparable to elemental doping, and demonstrates the ability to analyze the electrical properties of composite materials using EMT.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
2. High thermoelectric figure of merit in nanostructured p-type PbTe–MTe (M = Ca, Ba)10.1039/c1ee02297k ↗
3. Study on thermoelectric performance by Na doping in nanostructured Mg1-Na Ag0.97Sb0.9910.1016/j.nanoen.2014.11.027 ↗
4. Polycrystalline SnSe with extraordinary thermoelectric property via nanoporous design10.1021/acsnano.8b06387 ↗
5. Phonon scattering and suppression of bipolar effect in MgO/VO2 nanoparticle dispersed p-type Bi0.5Sb1.5Te3 composites10.3390/ma14102506 ↗
6. Nanostructured thermoelectrics: the new paradigm?10.1021/cm902195j ↗
7. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
8. Resonant bonding leads to low lattice thermal conductivity10.1038/ncomms4525 ↗
9. Intrinsically minimal thermal conductivity in cubic I − V − VI 2 semiconductors10.1103/PhysRevLett.101.035901 ↗
10. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
11. Giant anharmonic phonon scattering in PbTe10.1038/nmat3035 ↗
12. High thermoelectric performance by chemical potential tuning and lattice anharmonicity in GeTe 1−x I x compounds10.1039/D0QI01281E ↗
13. high lattice anharmonicity_resonant bonding10.1126/science.1159725 ↗
14. Resonant levels in bulk thermoelectric semiconductors10.1039/C1EE02612G ↗
15. High thermoelectric performance by resonant dopant indium in nanostructured SnTe10.1073/pnas.1305735110 ↗
16. Convergence of electronic bands for high performance bulk thermoelectrics10.1038/nature09996 ↗
17. Convergence of conduction bands as a means of enhancing thermoelectric performance of n -Type Mg 2 Si 1 − x Sn x solid solutions10.1103/PhysRevLett.108.166601 ↗
18. Band engineering of high performance p-type FeNbSb based half-Heusler thermoelectric materials for figure of merit zT > 110.1039/C4EE03042G ↗
19. Improvement of the efficiency of thermoelectric energy conversion by utilizing potential barriers10.1143/JJAP.36.170 ↗
20. Preparation of sintered degenerate n -type PbTe with a small grain size and its thermoelectric properties10.1063/1.1499206 ↗
21. Atomically thick bismuth selenide freestanding single layers achieving enhanced thermoelectric energy harvesting10.1021/ja3102049 ↗
22. High thermoelectric power factor in Cu–Ni alloy originate from potential barrier scattering of twin boundaries10.1016/j.nanoen.2015.09.003 ↗
23. Peierls distortion as a route to high thermoelectric performance in In4Se3-δ crystals10.1038/nature08088 ↗
24. Synergetic enhancement of thermoelectric performance by selective charge anderson localization–delocalization transition in n-type Bi-Doped PbTe/Ag 2 Te nanocomposite10.1021/acsnano.8b08579 ↗
25. Anomalous thermopower and high ZT in GeMnTe 2 driven by Spin’s thermodynamic Entropy10.34133/2021/1949070 ↗
26. Observation of enhanced thermopower due to spin fluctuation in weak itinerant ferromagnet10.1126/sciadv.aat5935 ↗
27. Significant off-stoichiometry effect leading to the N-type conduction and ferromagnetic properties in titanium doped Fe2VAl thin films10.1016/j.actamat.2020.09.067 ↗
28. Manipulating the Ge vacancies and Ge precipitates through Cr doping for realizing the high-performance gete thermoelectric material10.1002/smll.201906921 ↗
29. S. Perumal, P. Bellare, U.S. Shenoy, U.V. Waghmare, K. Biswas, Low thermal conductivity and high thermoelectric performance in Sb and Bi co-doped GeTe: complementary effect of band convergence and nanostructuring, (n.d.).
30. Resonant level-induced high thermoelectric response in indium-doped GeTe10.1038/am.2016.203 ↗
31. J. Li, X. Zhang, S. Lin, Z. Chen, Y. Pei, Realizing the superior thermoelectric performance of GeTe by Sb-doping and Se-alloying, (n.d.).
32. Anomalous enhancement of thermoelectric performance in GeTe with specific interaxial angle and atomic displacement synergy
33. Contrasting the roles of Cu interstitials and Sb substitutions in regulating ferroelectric distortions and thermoelectric properties of α-GeTe10.1021/acsaem.3c00323 ↗
34. Grain boundary complexions enable a simultaneous optimization of electron and phonon transport leading to high-performance GeTe thermoelectric devices
35. Discordant nature of Cd in GeTe enhances phonon scattering and improves band convergence for high thermoelectric performance10.1039/C9TA10436D ↗
36. Lone-pair engineering: achieving ultralow lattice thermal conductivity and enhanced thermoelectric performance in Al-doped GeTe-based alloys
37. Enhanced thermoelectric performance in Ge 0.955− x Sb x Te/FeGe 2 composites enabled by hierarchical defects10.1002/smll.202100915 ↗
38. High-performance lead-free cubic GeTe-based thermoelectric alloy
39. Waseda · 2011
40. The electrical resistance of binary metallic mixtures10.1063/1.1702301 ↗
41. An equation for the conductivity of binary mixtures with anisotropic grain structures10.1088/0022-3719/20/7/004 ↗
42. Electrical resistivity of composites10.1111/j.1151-2916.1990.tb07576.x ↗
43. Characterization of lorenz number with seebeck coefficient measurement10.1063/1.4908244 ↗