Pressure induced bands convergence and strength enhancement in thermoelectric semiconductor β-InSe
Source abstract
Abstract
The semiconductor InSe possesses an exceptional ductility at room temperature, but its weak electronic transport properties leads to the low thermoelectric properties, limiting its applications in flexible thermoelectric devices. In this work, we applied first principles to find that the hydrostatic pressure can remarkably improve the thermoelectric and mechanical properties of β-InSe. The multiple conduction bands convergence is observed at the hydrostatic pressure of 5 GPa, resulting in a maximum zT value of 0.235 at 300 K, which is 170 % higher than the intrinsic zT value of 0.087. The point defect calculations suggest that In 0.96Pb 0.04Se or InSe 0.96Cl 0.04 could obtain the optimal carrier concentration of 7.65 × 10 19 cm −3 with the highest zT value. In addition, we find that the (001)/<110>slip system of InSe exhibits the lowest ideal shear strength of 0.68 GPa, due to the weak interlayered van der Waals Se Se bonds. While the hydrostatic pressure can reduce the bond lengths and strengthen the van der Waals Se Se bonds. At 5 GPa, a maximum stretching force constant of van der Waals Se Se bond is obtained, giving rise to a maximum shear ideal strength of 1.45 GPa, which is 113 % higher than that without pressure. This hydrostatic pressure induced strain engineering strategy provides a theoretical guidance to synthesize high-performance thermoelectric β-InSe with robust mechanical properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · 2D Materials and Applications · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
2. Advances in thermoelectrics10.1080/00018732.2018.1551715 ↗
3. Advances in thermoelectric materials research: looking back and moving forward10.1126/science.aak9997 ↗
4. Complex thermoelectric materials10.1038/nmat2090 ↗
5. Recent development of thermoelectric polymers and composites10.1002/marc.201700727 ↗
6. High performance p-type half-Heusler thermoelectric materials10.1088/1361-6463/aaaa58 ↗
7. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
8. High-performance SnSe thermoelectric materials: progress and future challenge10.1016/j.pmatsci.2018.04.005 ↗
9. Brittle failure mechanism in thermoelectric skutterudite CoSb310.1021/acs.chemmater.5b02268 ↗
10. Micro- and macromechanical properties of thermoelectric lead chalcogenides10.1021/acsami.7b15651 ↗
11. Mechanical softening of thermoelectric semiconductor Mg2Si from nanotwinning10.1016/j.scriptamat.2018.08.002 ↗
12. Flexible thermoelectric materials and device optimization for wearable energy harvesting10.1039/C5TC01644D ↗
13. Flexible n-type thermoelectric materials by organic intercalation of layered transition metal dichalcogenide TiS210.1038/nmat4251 ↗
14. Exceptional plasticity in the bulk single-crystalline van der Waals semiconductor InSe10.1126/science.aba9778 ↗
15. Super deformability and thermoelectricity of Bulk γ-InSe single crystals10.1088/1674-1056/abf133 ↗
16. First-principles study of the electronic structure of γ-InSe and β-InSe10.1103/PhysRevB.48.14135 ↗
17. Two-dimensional indium selenides compounds: an ab initio study10.1021/acs.jpclett.5b01356 ↗
18. Indium selenide: an insight into electronic band structure and surface excitations10.1038/s41598-017-03186-x ↗
19. Improvement of the thermoelectric performance of InSe-based alloys doped with Sn10.1039/C5RA23023C ↗
20. Dynamic carrier transports and low thermal conductivity in n-type layered InSe thermoelectrics10.1002/agt2.92 ↗
21. Thermoelectric properties of In1.3−xSnxSe prepared by spark plasma sintering method10.1016/j.jallcom.2012.11.139 ↗
22. Electronic and thermal properties of Si-doped InSe layered chalcogenides10.3938/jkps.72.775 ↗
23. Electrical and thermal transport properties of S- and Te-doped InSe alloys10.1088/1361-6463/ab1caa ↗
24. Impurity levels in layered semiconductor n-InSe doped with Ge10.1002/pssb.200301558 ↗
25. Electrical and optical properties of n- and p-InSe doped with Sn and As10.1063/1.1539558 ↗
26. Thermoelectric properties of doped beta-InSe by Bi: first principle calculations10.1016/j.physb.2020.412105 ↗
27. Enhanced thermoelectric performance of PbTe within the orthorhombic pnma phase10.1103/PhysRevB.76.155127 ↗
28. Pressure-tuned colossal improvement of thermoelectric efficiency of PbTe10.1063/1.2715123 ↗
29. Large enhancement of thermoelectric performance in CuInTe2 upon compression10.1016/j.mtphys.2018.04.002 ↗
30. Large enhancement of thermoelectric efficiency due to a pressure-induced Lifshitz transition in SnSe10.1103/PhysRevLett.122.226601 ↗
31. First-principles predictions of structural, mechanical and electronic properties of βTiNb under high pressure10.1016/j.spmi.2018.02.004 ↗
32. Effect of pressure on elastic, mechanical and electronic properties of WSe2: a first-principles study10.1016/j.materresbull.2013.11.016 ↗
33. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
34. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
35. BoltzTraP2, a program for interpolating band structures and calculating semi-classical transport coefficients10.1016/j.cpc.2018.05.010 ↗
36. First principles phonon calculations in materials science10.1016/j.scriptamat.2015.07.021 ↗
37. ShengBTE: a solver of the Boltzmann transport equation for phonons10.1016/j.cpc.2014.02.015 ↗
38. Enhanced ideal strength of thermoelectric half-Heusler TiNiSn by sub-structure engineering
39. Enhanced strength through nanotwinning in the thermoelectric semiconductor InSb10.1103/PhysRevLett.119.215503 ↗
40. Ideal strength and deformation mechanism in high-efficiency thermoelectric SnSe10.1021/acs.chemmater.7b00279 ↗
41. Superstrengthening Bi2Te3 through nanotwinning10.1103/PhysRevLett.119.085501 ↗
42. Ductile deformation mechanism in semiconductor alpha-Ag2S10.1038/s41524-018-0100-0 ↗
43. Multicomponent multisublattice alloys, nonconfigurational entropy and other additions to the alloy theoretic automated toolkit10.1016/j.calphad.2008.12.005 ↗
44. Ab initio investigation into structural, mechanical and electronic properties of low pressure, high pressure and high pressure-high temperature phases of indium selenide10.1016/j.commatsci.2016.07.013 ↗
45. Necessary and sufficient elastic stability conditions in various crystal systems10.1103/PhysRevB.90.224104 ↗
46. Ab initio calculations of elastic constants and thermodynamic properties of bcc, fcc and hcp Al crystals under pressure10.1088/0953-8984/14/29/301 ↗
47. First-principles calculations for point defects in solids10.1103/RevModPhys.86.253 ↗
48. Flexible Bi2Te3-based thermoelectric generator with an ultra-high power density
49. Novel thermal diffusion temperature engineering leading to high thermoelectric performance in Bi2Te3-based flexible thin-films10.1002/advs.202103547 ↗
50. Evolution of defect structures leading to high ZT in GeTe-based thermoelectric materials10.1038/s41467-022-33774-z ↗
51. Hierarchical architectural structures induce high performance in n-type GeTe-based thermoelectrics
52. Fracture toughness of thermoelectric materials10.1016/j.mser.2021.100607 ↗