High-efficiency cadmium-free Cu(In,Ga)Se2 flexible thin-film solar cells on ultra-thin glass as an emerging substrate
Source abstract
Abstract
Cu(In,Ga)Se 2 (CIGSe) solar cells have significantly progressed in associated flexible photovoltaic technologies. Recently, ultra-thin glass (UTG) has been recognized as an emerging novel flexible substrate that is compatible with conventional thick glass-based methodology. In this work, the flexible CIGSe solar cell on UTG using a well-known three-stage process yielded 18.1 % with CdS buffer, which is higher than that of conventional solar cells on thick glass. However, UTG becomes brittle at high temperatures (>600 °C) due to thermal reorganization of potassium. To address the issue, a thin Ag precursor layer was introduced, enabling effective grain growth at reduced temperatures (<500 °C). Optimized Ag alloying (∼1 at%) enhanced grain structure and device efficiency, reaching up to 17.45 % at lower temperatures. Additionally, (Zn,Mg)O as a cadmium-free buffer was explored to address environmental concerns. With the inclusion of an intrinsic zinc oxide (i-ZnO) layer, the CIGSe/(Zn,Mg)O heterojunction was protected from transparent conductive oxide (TCO) sputtering damage, showing increased open circuit voltage and efficiency. Overall, we have successfully demonstrated a flexible and environmentally friendly cadmium-free CIGSe solar cell with an efficiency of approximately 17.81 %. Moreover, scaling up the fabrication process for a large-area cell with 60 cm² achieved a device efficiency of 10.11 % with a lamination process. This study advances the potential of high-efficiency CIGSe solar cells on flexible UTG substrates for various practical applications, including building integration on curved surfaces, portable devices, and automobiles. • Demonstrated flexible, Cd‐free Cu(In,Ga)Se₂ solar cells on emerging ultrathin glass substrates. • Achieved a record efficiency of 17.81 % for flexible, Cd‐free Cu(In,Ga)Se₂ solar cells on ultrathin glass substrates. • Achieved an efficiency of 10.11 % for 60 cm² large-area Cd-free CIGSe cells. • Established a platform for controlling microstructure and defect properties through low-melting-point Ag doping.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Radiation resistant chalcopyrite CIGS solar cells: proton damage shielding with Cs treatment and defect healing via heat-light soaking
2. Review on the developments in copper indium gallium diselenide (CIGSe)-based thin film photovoltaic devices10.1007/s10854-024-12658-6 ↗
3. High-concentration silver alloying and steep back-contact gallium grading enabling copper indium gallium selenide solar cell with 23.6% efficiency
4. M. Hagmann, Flexible solar cells with record efficiency of 22.2%, in: EMPA, 2022.
5. MiaSole', New World Record Efficiency with Flexible CIGS Solar Cell, in, MiaSole', 2019.
6. CIGS solar cells on flexible ultra-thin glass substrates: characterization and bending test10.1016/j.tsf.2015.09.006 ↗
7. Nanomaterials in 2-dimensions for flexible solar cell applications–a review10.1080/23311916.2022.2143034 ↗
8. Effect of bending test on the performance of CdTe solar cells on flexible ultra-thin glass produced by MOCVD10.1016/j.solmat.2020.110552 ↗
9. Fabrication of bendable and narrow bandgap Cu (In,Ga)(S,Se)2 for tandem photovoltaics10.1038/s43246-024-00706-x ↗
10. Effect of potassium fluoride post-deposition treatment on Cu(In,Ga)Se2 thin films and solar cells fabricated onto sodalime glass substrates10.1016/j.solmat.2016.06.023 ↗
11. Chemistry of K in Cu(In,Ga)Se2 photovoltaic absorbers: effects of temperature on Cu-K-In-Se films10.1016/j.jallcom.2017.08.019 ↗
12. Mechanisms of extrinsic alkali incorporation in CIGS solar cells on flexible polyimide elucidated by nanoscale and quantitative analyses10.1016/j.nanoen.2019.104201 ↗
13. Direct insight into grain boundary reconstruction in polycrystalline Cu(In,Ga)Se2 with atomic resolution10.1103/PhysRevLett.108.075502 ↗
14. Cd-free Cu(In, Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
15. Characterization and device performance of (AgCu)(InGa)Se2 absorber layers
16. The comparison of (Ag, Cu)(In, Ga)Se2 and Cu(In, Ga)Se2 thin films deposited by three-stage coevaporation10.1109/JPHOTOV.2013.2280471 ↗
17. Surface modification of CIGS film by annealing and its effect on the band structure and photovoltaic properties of CIGS solar cells10.1016/j.cap.2014.09.023 ↗
18. Origin of reduced efficiency in Cu(In,Ga)Se2 solar cells with high Ga concentration: alloy solubility versus intrinsic defects10.1109/JPHOTOV.2013.2285617 ↗
19. Correlative transmission Kikuchi diffraction and atom probe tomography study of Cu(In,Ga)Se2 grain boundaries10.1002/pip.2966 ↗
20. Device characterization of (AgCu)(InGa)Se2 solar cells
21. Improved carrier transport in CIGS solar cells induced by Ag treatment10.1016/j.jallcom.2021.161193 ↗
22. Highly efficient Ag-alloyed Cu(In,Ga)Se2 solar cells with wide bandgaps and their application to chalcopyrite-based tandem solar cells10.1016/j.nanoen.2018.03.052 ↗
23. Secondary phase formation in (Ag,Cu)(In,Ga)Se2 thin films grown by three-stage co-evaporation10.1016/j.solmat.2017.03.001 ↗
24. Crystallographic and electrical properties of wide gap Ag(In1− x, Gax)Se2 thin films and solar cells10.1016/j.stam.2005.11.016 ↗
25. Wide-gap (Ag,Cu)(In, Ga)Se2 solar cells with different buffer materials—a path to a better heterojunction10.1002/pip.3232 ↗
26. Exploring the deposition pathway in the notch region of double-graded bandgap ACIGS solar cells
27. An investigation of the surface properties of (Ag,Cu)(In,Ga)Se2 thin films10.1109/JPHOTOV.2012.2204391 ↗
28. Challenges in the deposition of (Ag, Cu)(In, Ga)Se2 absorber layers for thin-film solar cells10.1088/2515-7639/abd73d ↗
29. Band offset of high efficiency CBD-ZnS/CIGS thin film solar cells10.1016/S0040-6090(03)00265-7 ↗
30. MgZnO based ultraviolet photodetector with high photoresponsivity achieved by fluorine doping10.1016/j.tsf.2017.03.054 ↗
31. Analysis of microstructural properties, energy band structure, and defect levels of ZnS films obtained from micro-controlled SILAR method10.1002/sia.6520 ↗
32. Influences of Mg concentration in ZnMgO film on energy band alignment at CIGSSe/Zn1-xMgxO interface and performances of CIGSSe solar cells10.1016/j.solener.2022.09.039 ↗
33. Cd-free Zn(O, S) as alternative buffer layer for chalcogenide and kesterite based thin films solar cells: a review10.1166/jnn.2020.17537 ↗
34. Performance improvement in Cd-free Cu(In,Ga)Se2 solar cells by modifying the electronic structure of the ZnMgO buffer layer10.1039/C4RA07776H ↗
35. Optimization of i-ZnO window layers for Cu(In,Ga)Se2 solar cells with ALD buffers
36. Transparent electrode and buffer layer combination for reducing carrier recombination and optical loss realizing over a 22%-efficient Cd-free alkaline-treated Cu(In, Ga)(S, Se)2 solar cell by the all-dry process10.1021/acsami.0c01980 ↗
37. U.T.I. (UTI), Ultra-thin Flexible Glass in, 2025.
38. Flexible and lightweight perovskite/Cu (In, Ga) Se2 tandem solar cells
39. Silver surface treatment of Cu(In, Ga)Se2 (CIGS) thin film: a new passivation process for the CdS/CIGS heterojunction interface10.1002/solr.202000290 ↗
40. Optical and quantum efficiency analysis of (Ag, Cu)(In,Ga)Se2 absorber layers
41. The electronic structure of Cu(In1− xGax)Se2 alloyed with silver10.1016/j.tsf.2011.01.368 ↗
42. Ag incorporation in low-temperature grown Cu(In,Ga)Se2 solar cells using Ag precursor layers10.1016/j.solmat.2015.11.028 ↗
43. Structural characterization of the (AgCu)(InGa)Se2 thin film alloy system for solar cells10.1016/j.tsf.2011.01.138 ↗
44. High efficiency CIGS solar cells by bulk defect passivation through Ag substituting strategy10.1021/acsami.9b21354 ↗
45. Thin Ag precursor layer-assisted co-evaporation process for low-temperature growth of Cu(In,Ga)Se2 thin film10.1021/acsami.9b09253 ↗
46. Characterization of (AgCu)(In,Ga)Se2 absorber layer fabricated by a selenization process from metal precursor10.1109/JPHOTOV.2012.2221083 ↗
47. Formation and characterisation of MoSe2 for Cu(In,Ga)Se2 based solar cells10.1016/j.tsf.2004.11.098 ↗
48. Determining factor of MoSe2 formation in Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2012.02.015 ↗
49. Electrical impact of MoSe2 on CIGS thin-film solar cells10.1039/c3cp53310g ↗
50. Silver-promoted high-performance (Ag,Cu)(In,Ga)Se2 thin-film solar cells grown at very low temperature10.1002/solr.202100108 ↗
51. Diffusion of indium and gallium in Cu(In, Ga)Se2 thin film solar cells10.1016/S0022-3697(03)00127-6 ↗
52. Enabling low-temperature deposition of high-efficiency CIGS solar cells with a modified three-stage co-evaporation process10.1021/acsaem.9b02025 ↗
53. Impact of grain size and grain nature in thin-film solar cells10.1002/ente.202300754 ↗
54. Size and grain-boundary effects on the performance of polycrystalline CIGS-based solar cells
55. Reaction engineering and precursor film deposition for CIS synthesis
56. Real time spectroscopic ellipsometry analysis of the three-stages of CuIn1− xGaxSe2 co-evaporation, in
57. Phase equilibria in the Cu-Se system10.1007/BF02758413 ↗
58. Effects of Ammonia-Induced Surface Modification of Cu (In, Ga) Se2 on High-Efficiency Zn (O, S)-Based Cu (In, Ga) Se2 Solar Cells10.1002/solr.201800254 ↗
59. Gottstein · 2004
60. Finite element modeling for analysis of electroluminescence and infrared images of thin-film solar cells10.1016/j.solener.2020.08.058 ↗
61. 12.95% Efficient Cu (In, Ga) Se2 solar cells by single-step atmospheric selenization, scaled to monolithically integrated modules10.1021/acsaem.0c02254 ↗