journal article·2024-04

Boosting electrochemical properties of Li0.33La0.55TiO3-based electrolytes with Ag incorporation

Linxiang Wang, Zongmo Shi, Xiaomei Feng, Junzhan Zhang, Guoxin Hu, Hao Zhang, Qing Han, Qiantao Zhang

Publisher page

Abstract

Perovskite Li 0.33Ag xLa 0.557-xTiO 3 electrolytes were prepared using sol-gel chemical reaction, which was used as the intermediate layer of all solid-state rechargeable lithium batteries. The effects of Ag + content on the microstructures and electrochemical impedance properties of Li 0.33La 0.55TiO 3 (LLTO) were studied. The ionic conductivities of 1.54 × 10 −4 S/cm at room temperature and 1.6 × 10 −3 S/cm at 358 K were obtained for the Li 0.33Ag 0.10La 0.457TiO 3 sample, respectively. The improvement in conductivities was attributed to the structural integrity of LLTO electrolytes and the bottleneck size of Li + ions was expanded. Meanwhile, The Ag inclusions at grain boundaries reduced the grain boundary resistance, resulting in a significant increase in the conductivity of LLTO. This work proves that the large dielectric constant was due to the Li + ions dipole inside the electrolyte and the interfacial polarization of lithium-ion accumulation near the grain boundary. The Ag incorporation was an effective method for improving the resistance of lithium-ion battery electrolytes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Li0.33La0.557TiO3 ceramic nanofiber-enhanced polyethylene oxide-based composite polymer electrolytes for all-solid-state lithium batteries10.1039/C7TA10517G ↗
2. Enhanced Li+ conduction in perovskite Li3xLa2/3−x□1/3−2xTiO3 solid-electrolytes via microstructural engineering10.1039/C7TA00196G ↗
3. Augmented conductivity in Li3xLa2/3−xTiO3 nanoparticles: all-solid-state Li-ion battery applications10.1007/s10854-019-02648-4 ↗
4. Amorphous LiLaTiO3 as solid electrolyte material10.1149/2.006404jes ↗
5. A fundamental stability study for amorphous LiLaTiO3 solid electrolyte10.1149/2.0011503jes ↗
6. Li3xLa2/3−xTiO3 nanoparticles with different morphologies and self-organization, obtained from simple solution precipitation methods10.1016/j.matlet.2014.08.153 ↗
7. A study on Li0.33La0.55TiO3 solid electrolyte with high ionic conductivity and its application in flexible all-solid-state batteries10.1039/D1NR02427B ↗
8. Growth of lithium lanthanum titanate nanosheets and their application in lithium-ion batteries10.1021/acsami.5b10877 ↗
9. Elucidating the nature of grain boundary resistance in lithium lanthanum titanate10.1039/D0TA11539H ↗
10. Oriented crystal growth of La0.557Li0.330TiO3 in bulk ceramics induced by LaAlO3 single-crystal fibers10.1021/acs.cgd.0c01518 ↗
11. Microstructure and ionic conductivity of LLTO thin films: Influence of different substrates and excess lithium in the target10.1016/j.ssi.2014.12.005 ↗
12. Sr doped amorphous LLTO as solid electrolyte material
13. Investigations on pure and Ag doped lithium lanthanum titanate (LLTO) nanocrystalline ceramic electrolytes for rechargeable lithium-ion batteries10.1016/j.ceramint.2012.07.011 ↗
14. Unravelling the complex nanostructure of La0.5-xLi0.5-xSr2xTiO3 Li ionic conductors10.1039/C6DT00630B ↗
15. A correlation between formation enthalpy and ionic conductivity in perovskite-structured Li3xLa0.67−xTiO3 solid lithium ion conductors10.1039/C7TA02434G ↗
16. Origin of high interfacial resistance in solid‐state batteries: LLTO/LCO half‐cells10.1002/celc.202100189 ↗
17. Effects of B-site ion (Nb5+) substitution on the microstructure and ionic conductivity of Li0.5La0.5TiO3 solid electrolytes10.1080/00150193.2019.1684768 ↗
18. On the local structure and lithium dynamics of La0.5(Li, Na)0.5TiO3 ionic conductors a Raman study10.1021/cm0517770 ↗
19. Influence of microstructure on the ionic conductivity of yttria-stabilized zirconia electrolyte10.1016/S0921-5093(01)01935-9 ↗
20. Influence of Li2O-B2O3 glass on ionic migration and interfacial properties of La2/3-xLi3xTiO3 solid electrolyte10.1016/j.jallcom.2017.02.059 ↗
21. Microstructure and ionic conductivity of Li0.5-xLa0.5(Ti1-xNbx)O3 solid-state electrolytes
22. On the La2/3-xLi3xTiO3/Al2O3 composite solid-electrolyte for Li-ion conduction10.1016/j.jallcom.2013.04.195 ↗
23. Chemical interaction and enhanced interfacial ion transport in a ceramic nanofiber–polymer composite electrolyte for all-solid-state lithium metal batteries10.1039/C9TA12495K ↗
24. A correlation between formation enthalpy and ionic conductivity in perovskite-structured Li3xLa0.67-xTiO3 solid lithium ion conductors10.1039/C7TA02434G ↗
25. Ionic and electronic conductivity of solid electrolyte Li0.5La0.5TiO3 doped with LiO2-SiO2-B2O3 glass10.1016/j.jallcom.2017.12.361 ↗
26. Ionic conduction colossal permittivity and dielectric relaxation behavior of solid electrolyte Li3xLa2/3-xTiO3 ceramics10.1016/j.jeurceramsoc.2018.05.023 ↗
27. Rhombohedral-cubic transition in Li0.2Na0.3La0.5TiO3 perovskite10.1016/j.jssc.2004.06.037 ↗
28. Structural and electrical effects of Y-doped Li0.33La0.56-xYxTiO3 solid electrolytes on all-solid-state lithium ion batteries10.3938/jkps.74.73 ↗