journal article·2023-07

Piezoelectric properties and depolarization characteristics of BNKLT-0.15/0.075 ceramics doped with different ions

Zhuang Cao, Yao Huang, Peng Du, Weiping Li, Laihui Luo

Publisher page

Abstract

Ternary system Bi 0.5(Na 0.775K 0.15Li 0.075) 0.5TiO 3 (BNKLT-0.15/0.075) ceramics doped with Mn 2+, Fe 3+, Sm 3+ ions have been successfully prepared using the high temperature sintering method. The phase structure, piezoelectric properties and depolarization characteristics of the ceramics have been investigated. It is found that Mn 2+, Fe 3+ ions replace Ti 4+ ions and Sm 3+ ions replace Bi 3+ ions in the BNKLT-0.15/0.075 ceramics. 0.3 mol% Mn 2+ doping has a ‘hard’ effect in BNKLT-0.15/0.075 ceramics like it plays the role in lead-contained Pb(Ti,Zr)O 3 ferroelectric ceramics. Fe 3+ can significantly improve the d 33 and k p of the ceramics, while maintaining a slight increment of Q m. However, Sm 3+ doping decreases the d 33 and k p of the ceramics. The distinct difference of the doping effects on the electrical properties of the ceramics is tightly related to the depolarization process of the ceramics. It is found the thermally stimulated depolarization current (TSDC) of the prepared ceramics have two peaks: one is caused by the disintegration of long-range ferroelectric order into polar nanoregions at T d, and the other peak is induced by the phase transition from R3c to P4bm at T c-d . The depolarization process of the ceramics has been discussed basing on the TSDC, dielectric characterization and in-situ XRD measurement of the ceramics.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Effects of sintering temperature and poling conditions on the electrical properties of Ba0.70Ca0.30TiO3 diphasic piezoelectric ceramics10.1016/j.ceramint.2012.09.073 ↗
2. Flexible piezoelectric nanogenerator based on the Er3+ doped lead-free (Na0.5Bi0.5)TiO3-BaTiO3 piezoelectric nanofibers with strong upconversion luminescence10.1016/j.jallcom.2022.165766 ↗
3. All-inorganic flexible piezoelectric energy harvester enabled by two-dimensional mica10.1016/j.nanoen.2017.11.037 ↗
4. Enhanced piezoelectric properties in BF-BT based lead-free ferroelectric ceramics for high-temperature devices10.1016/j.ceramint.2022.09.145 ↗
5. Simultaneous enhancement of piezoelectricity and temperature stability in KNN‐based lead‐free ceramics via layered distribution of dopants10.1002/adfm.202204385 ↗
6. The mechanism for the enhanced piezoelectricity in multi-elements doped (K,Na)NbO3 ceramics10.1038/s41467-021-21202-7 ↗
7. Significantly improved energy storage performance of NBT-BT based ceramics through domain control and preparation optimization10.1016/j.cej.2021.129900 ↗
8. Phase diagrams and electrical properties of (Bi1/2Na1/2)TiO3-based solid solutions10.1063/1.3043588 ↗
9. Na1/2Bi1/2TiO3-based lead-free piezoceramics: a review of structure–property correlation10.18520/cs/v118/i10/1507-1519 ↗
10. Determination of depolarization temperature of (Bi1/2Na1/2)TiO3-based lead-free piezoceramics10.1063/1.3660253 ↗
11. Advances in tuning the “d33 ∝ 1/Td” bottleneck: simultaneously realizing large d33 and high Td in Bi0.5Na0.5TiO3-based relaxor ferroelectrics10.1039/D0TA01559H ↗
12. Microstructural, ferroelectric, and photoluminescent properties of (100)‐oriented Sm3+‐doped Na0.5Bi0.5TiO3 thin films10.1111/jace.15737 ↗
13. Structure and properties of Fe-modified Na0.5Bi0.5TiO3 at ambient and elevated temperature10.1103/PhysRevB.85.024121 ↗
14. Enhanced high-temperature piezoelectric coefficients and thermal stability of Fe- and Mn-substituted Na0.5Bi0.5TiO3 ceramics10.1111/j.1551-2916.2011.04441.x ↗
15. Preparation and characterization of the bismuth sodium titanate (Na0.5Bi0.5TiO3) ceramic doped with ZnO10.1016/j.apt.2011.04.015 ↗
16. Depoling phenomena in Na0.5Bi0.5TiO3−BaTiO3: a structural perspective10.1103/PhysRevB.103.184106 ↗
17. Piezoelectric and ferroelectric properties of Bi-compensated (Bi1/2Na1/2)TiO3–(Bi1/2K1/2)TiO3 lead-free piezoelectric ceramics
18. Tailoring the piezoelectric and photoluminescence properties of Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3-BaTiO3-based multifunctional ceramics with Sm doping10.1007/s11664-020-08213-8 ↗
19. Large electrostrain in low‐temperature sintered NBT‐BT‐0.025FN incipient piezoceramics10.1111/jace.17058 ↗
20. Recent progresses on researches of new BNT-based lead-free piezoelectric ceramics10.1080/00150190701536531 ↗
21. Structure, electrical properties and temperature characteristics of Bi0.5Na0.5TiO3–Bi0.5K0.5TiO3–Bi0.5Li0.5TiO3 lead-free piezoelectric ceramics10.1007/s00339-008-4667-z ↗
22. Impedance spectroscopy of lead-free (1-x-y)Bi0.5Na0.5TiO3–xBi0.5K0.5TiO3–yBi0.5Li0.5TiO3 piezoelectric ceramics10.1080/10584587.2017.1285192 ↗
23. Enhanced electrical properties near the morphotropic phase boundary in lead-free Bi0.5Na0.34K0.11Li0.05Ti1-xNixO3-δ ceramics10.1016/j.radphyschem.2021.109716 ↗
24. T.J.I.J.o.M. Bongkarn, Metallurgy, Materials, Effect of Co2+ substitution in B-sites of the perovskite system on the phase formation, microstructure, electrical and magnetic properties of Bi0.5(Na0.68K0.22Li0.10)0.5TiO3 ceramics10.1007/s12613-021-2345-8 ↗
25. Electromechanical properties of acceptor-doped lead-free piezoelectric ceramics10.1111/jace.12805 ↗
26. The effect of Cu2+ substitution on the properties of BNKLT lead-free ceramics fabricated by the solid-state combustion technique10.1080/10584587.2020.1857177 ↗
27. Thermally stable ferroelectricity and photoluminescence in Sm-doped 0.8(Bi0.5Na0.5)TiO3-0.2SrTiO3 ferroelectric ceramics10.1016/j.ceramint.2016.09.146 ↗
28. Improved depolarization temperature via the ordered alignment of defect dipoles in (Na0.5Bi0.5)TiO3-BaTiO3 ceramics10.1016/j.jeurceramsoc.2019.10.041 ↗
29. High-temperature stable dielectrics in Mn-modified (1-x)Bi0.5Na0.5TiO3-xCaTiO3 ceramics10.1007/s10832-010-9617-4 ↗
30. Electrical and luminescence properties of Er-doped Bi0.5Na0.5TiO3 ceramics10.1016/j.mseb.2013.08.007 ↗
31. Tunable luminescence contrast in photochromic ceramics (1-x)Na0.5Bi0.5TiO3-xNa0.5K0.5NbO3:0.002Er by an electric field poling10.1021/acsami.8b15784 ↗
32. Enhancement of Qm by co-doping of Li and Cu to potassium sodium niobate lead-free ceramics10.1109/TUFFC.2008.743 ↗
33. (K,Na)NbO3-based ceramics for piezoelectric “hard”lead-free materials10.1111/j.1551-2916.2009.03528.x ↗
34. Effect of microwave sintering on the microstructure and piezoelectric properties of ZnO-doped Bi0.5Na0.5TiO3 ceramics10.2109/jcersj2.121.430 ↗
35. Effects of Co2O3 on the piezoelectric properties of Na0.5Bi0.5TiO3 lead-free piezoelectric ceramics10.4028/www.scientific.net/KEM.434-435.340 ↗
36. Deviation from Curie-Weiss behavior in relaxor ferroelectrics10.1103/PhysRevB.46.8003 ↗
37. Simultaneously achieving giant piezoelectricity and record coercive field enhancement in relaxor-based ferroelectric crystals10.1038/s41467-022-29962-6 ↗
38. Study of relaxor behavior in a lead-free (Na0.5Bi0.5)TiO3-SrTiO3-BaTiO3 ternary solid solution system10.1016/j.ceramint.2016.05.014 ↗