Investigation of Mg dopant in Cu2SnSe3 thin films for photovoltaic applications
Source abstract
Abstract
Abstract Mg-doped Cu 2 SnSe 3 films were prepared by DC magnetron co-sputtering at room temperature for 1 h with two different targets of Cu and Sn or Cu-Mg and Sn based upon the formula of (Cu 2− x Mg x )SnSe 3 at x = 0, 0.1, 0.2, and 0.3, abbreviated as Mg- x -Cu 2 SnSe 3 , or the [Mg]/([Cu]+[Mg]) composition ratios in the Cu-Mg target at 0, 0.05, 0.1, and 0.15, followed by a selenization procedure at 550 °C under the Se atmosphere. Mg-doped Cu 2 SnSe 3 films were a cubic structure. The direct optical band gaps of Mg- x -CTSe films at x = 0, 0.1, 0.2, and 0.3 were estimated to be 1.19 eV, 1.18 eV, 1.19 eV, and 1.21 eV, respectively. Defect chemistry was studied by measuring structural and electrical properties of Mg-doped Cu 2 SnSe 3 as a function of dopant concentration. Mg- x -CTSe films showed p -type at x = 0 and 0.1 and n -type at x = 0.2 and 0.3. The explanation based upon the Mg-to-Cu antisite donor defect for the change in electrical property was declared. Mg doping in controlling the electrical properties of CTSe films is fulfilled, as we did for its bulks.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%, physica status solidi (RRL)
2. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%, physica status solidi (RRL)
3. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
4. Effects of the metallic target compositions on the absorber properties and the performance of Cu2ZnSnSe4 solar cell devices fabricated on TiN-coated Mo/glass substrates10.1016/j.mseb.2014.03.014 ↗
5. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
6. 6% efficiency Cu2ZnSnS4-based thin film solar cells using oxide precursors by open atmosphere type CVD10.1039/c2jm16454j ↗
7. Development of 3.7 % efficient Cu2ZnSnSe4 solar cells by selenizing Cu-Zn-Sn films deposited by dc sputtering on TiN-protected Mo/glass substrates10.1007/s11664-014-3137-y ↗
8. Crystal growth and structure, electrical, and optical characterization of the semiconductor Cu2SnSe310.1063/1.1383984 ↗
9. Growth and characterization of coevaporated Cu2SnSe3 thin films for photovoltaic applications10.1016/j.tsf.2013.03.119 ↗
10. Investigations on co-evaporated Cu2SnSe3 and Cu2SnSe3–ZnSe thin films10.1016/j.apsusc.2011.05.008 ↗
11. Growth and characterization of Cu2SnSe3 thin films10.1016/j.matchemphys.2005.07.050 ↗
12. Formation of Cu2SnSe3 from stacked elemental layers investigated by combined in situ x-ray diffraction and differential scanning calorimetry techniques10.1016/j.jallcom.2013.10.248 ↗
13. Single-step sputtered Cu2SnSe3 films using the targets composed of Cu2Se and SnSe210.1016/j.tsf.2010.04.077 ↗
14. Mg dopant in Cu2SnSe3: an n-type former and a promoter of electrical mobility up to 387 cm2V−1s−110.1016/j.jssc.2014.06.013 ↗
15. Influence of substrate and selenization temperatures on the growth of Cu2SnSe3 films10.1007/s10853-011-5661-y ↗
16. Influence of the preparation conditions on the morphology and electrochemical performance of nano-sized Cu–Sn alloy anodes10.1016/j.jallcom.2006.08.074 ↗
17. Structural, optical and electric properties of nanocrystalline MgSe thin films deposited by chemical route using triethanolamine as a complexing agent10.1016/j.solidstatesciences.2013.05.016 ↗
18. Revised effective ionic radii and systematic studies of interatomie distances in halides and chaleogenides10.1107/S0567739476001551 ↗
19. Pankove · 1971 · 36
20. Pauw · Philips Res. Rep. · 1958 · 13
21. Hole mobility enhancement of Cu-deficient Cu1.75Zn(Sn1−xAlx)Se4 bulks10.1016/j.jssc.2013.08.005 ↗
22. Acceptor-donor transition and electrical property of Cu-Deficient (Cu2-xZnx)ZnSnSe4 (x = 0–0.3) bulks10.1149/2.0061409ssl ↗
23. The investigation of CuxZnSnSe4 bulks with x = 1.4–2.2 for debating the Cu excess and Cu deficiency used in thin-film solar cells10.1016/j.materresbull.2013.10.009 ↗
24. Influence of Mg doping on electrical properties of Cu(In,Ga)Se2 bulk materials10.1016/j.jallcom.2013.08.101 ↗
25. New monoclinic phase at the composition Cu2SnSe3 and its thermoelectric properties10.1021/ic401317k ↗
26. First principles calculations of defect formation in in-free photovoltaic semiconductors Cu2ZnSnS4 and Cu2ZnSnSe410.7567/JJAP.50.04DP07 ↗