journal article·2025-01

Improving the power factor of spark plasma sintered Bi0,5Sb1,5Te3 via TiC dispersion

Reyhan Başar Boz, Cem Sevik, Servet Turan

Publisher page

Abstract

Integrating ceramic particles into the main thermoelectric material is a novel approach to enhance thermoelectric properties. In this work, we fabricated highly dense p-type Bi0,5Sb1,5Te3 thermoelectric materials dispersed with x wt% TiC particles (x = 0, 0.4, 0.6, 0.8) using the melting-solidification followed by spark plasma sintering (SPS) methods. The crystal structures were analyzed using X-ray diffraction (XRD), and surface and cross-sectional microstructures, as well as the presence of TiC particles in the matrix, were systematically investigated through scanning electron microscopy (SEM). The incorporation of TiC into the Bi0,5Sb1,5Te3 alloy resulted in a notable enhancement of electrical conductivity, exceeding 10 % at all range temperatures across all samples. The rise in weighted mobility and grain boundary coefficients are the main factors responsible for this enhancement. Nevertheless, the Seebeck coefficient measurements indicate a reduction in all samples as a result of the n-type semiconductor characteristics of TiC, where the carrier concentration is mostly governed by electrons. As a result, the power factor has improved by around 5 %. Additionally, the Vickers hardness of the Bi0,5Sb1,5Te3/TiC composites exhibited improvement exceeding 15 % compared to the base matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Microstructure tailoring in nanostructured thermoelectric materials10.1142/S2010135X16300024 ↗
2. Enhancement of thermoelectric properties by atomic-scale percolation in digenite Cu x S10.1039/C4TA01250J ↗
3. Carriers concentration tailoring and phonon scattering from n-type zinc oxide (ZnO) nanoinclusion in p-and n-type bismuth telluride (Bi2Te3): leading to ultra low thermal conductivity and excellent thermoelectric properties10.1016/j.jallcom.2016.10.076 ↗
4. Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe10.1126/science.aad3749 ↗
5. In-doped Pb0. 5Sn0. 5Te p-type samples prepared by powder metallurgical processing for thermoelectric applications10.1016/j.physb.2007.02.067 ↗
6. Phase separation and antisite defects in the thermoelectric TiNiSn half-Heusler alloys10.1016/j.jssc.2013.04.032 ↗
7. Thermoelectric properties of spark plasma sintered composites based on TiNiSn half-Heusler alloys10.1557/jmr.2011.107 ↗
8. Mechanical alloying and spark plasma sintering of higher manganese silicides for thermoelectric applications10.1007/s11664-013-2476-4 ↗
9. Enhancement of thermoelectric properties of Yb-filled skutterudites by an Ni-Induced “core–shell” structure10.1039/C4TA05083E ↗
10. Thermoelectric performance enhancement of CeFe 4 Sb 12 p-type skutterudite by disorder on the Sb 4 rings induced by Te doping and nanopores10.1007/s11664-015-3973-4 ↗
11. Thin-film thermoelectric devices with high room-temperature figures of merit10.1038/35098012 ↗
12. Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics10.1126/science.aaa4166 ↗
13. Reduction of thermal conductivity in Al2O3 dispersed p-type bismuth antimony telluride composites10.1016/j.matchemphys.2019.05.023 ↗
14. Enhanced thermoelectric figure-of-merit in Bi-Sb-Te nanocomposites with homogenously dispersed oxide ceramic ZrO2 nanoparticles10.1063/1.4984914 ↗
15. Enhanced seebeck coefficient by energy filtering in Bi-Sb-Te based composites with dispersed Y2O3 nanoparticles10.1016/j.intermet.2016.11.002 ↗
16. Shifting up the optimum figure of merit of p-type bismuth telluride-based thermoelectric materials for power generation by suppressing intrinsic conduction10.1038/am.2013.86 ↗
17. Fabrication and thermoelectric properties of p-type Bi0. 5Sb1. 5Te3 compounds by ingot extrusion10.1016/S0025-5408(00)00425-6 ↗
18. Enhanced thermoelectric performance of Bi0. 5Sb1. 5Te3-expanded graphene composites by simultaneous modulation of electronic and thermal carrier transport10.1016/j.nanoen.2015.02.001 ↗
19. Attaining high mid-temperature performance in (Bi, Sb) 2Te3 thermoelectric materials via synergistic optimization10.1038/am.2016.134 ↗
20. Simultaneously increased carrier concentration and mobility in p-type Bi0. 5Sb1. 5Te3 throng Cd doping10.1016/j.jallcom.2020.154625 ↗
21. Enhanced thermopower and thermoelectric performance through energy filtering of carriers in (Bi2Te3) 0.2 (Sb2Te3) 0.8 bulk alloy embedded with amorphous SiO2 nanoparticles10.1063/1.4817074 ↗
22. Enhanced thermoelectric performance through carrier scattering at spherical nanoparticles in Bi0. 5Sb1. 5Te3/Ta2O5 composites10.1016/j.jallcom.2017.01.340 ↗
23. Fabrication and enhanced thermoelectric properties of alumina nanoparticle-dispersed Bi0. 5Sb1. 5Te3 matrix composites10.1155/2013/821657 ↗
24. Enhanced thermoelectric properties of Bi0. 5Sb1. 5Te3 composites with in-situ formed senarmontite Sb2O3 nanophase10.1016/j.jallcom.2018.10.408 ↗
25. Effects of Ni and carbon-coated Ni addition on the thermoelectric properties of 25Bi2Te3+ 75Sb2Te3 base composites.10.1016/j.matchemphys.2017.04.010 ↗
26. Band engineering of thermoelectric materials10.1002/adma.201202919 ↗
27. Compromise and synergy in high-efficiency thermoelectric materials.10.1002/adma.201605884 ↗
28. Multiple heteroatom induced carrier engineering and hierarchical nanostructures for high thermoelectric performance of polycrystalline In 4 Se 2.510.1039/C4TA05508J ↗
29. High temperature transport and thermoelectric properties of Ag-substituted Ca3Co4O9+ δ system10.1016/j.jallcom.2006.10.047 ↗
30. Enhanced thermoelectric performance through carrier scattering at spherical nanoparticles in Bi0. 5Sb1. 5Te3/Ta2O5 composites10.1016/j.jallcom.2017.01.340 ↗
31. A hybrid method for the synthesis of small Bi0. 5Sb1. 5Te3 alloy particles10.1016/j.jallcom.2016.12.052 ↗
32. Enhanced thermoelectric properties by effective decoupling of electrical, thermal properties and seebeck coefficient through the addition of rare earth sesquioxides in p-type BiSbTe alloys10.1016/j.intermet.2018.11.017 ↗
33. Thermoelectric properties of carbide ceramics: a comparative analysis of thermoelectric properties of B4C, SiC and TiC
34. Large ZT enhancement in hot forged nanostructured p-type Bi 0.5 Sb 1.5 Te 3 bulk alloys10.1039/C3TA13952B ↗
35. Thermoelectric performance enhancement in BiSbTe alloy by microstructure modulation via cyclic spark plasma sintering with liquid phase10.1002/adfm.202009681 ↗
36. Tellurium-evaporation-annealing for p-type bismuth–antimony–telluride thermoelectric materials.10.1016/j.jallcom.2012.08.130 ↗
37. Realizing high-performance BiSbTe magnetic flexible films via acceleration movement and hopping migration of carriers.10.1002/adfm.202111373 ↗
38. Modulation of carrier concentration and microstructure for high performance BixSb2-xTe3 thermoelectrics prepared by rapid solidification10.1016/j.jssc.2018.04.038 ↗
39. n-type thermoelectric performance in Co-doped Bi2Te3 polycrystalline alloys10.1016/j.mssp.2023.107694 ↗
40. Intrinsic conductivity as an indicator for better thermoelectrics10.1039/D3EE02167J ↗
41. Charge transport mechanism in copper phthalocyanine thin films with and without traps10.1039/C7RA08316E ↗
42. Grain boundary dominated charge transport in Mg 3 Sb 2-based compounds10.1039/C7EE03326E ↗
43. Effect of SPS process sintering on the microstructure and mechanical properties of nanocrystalline TiC for tools application10.1016/j.ijrmhm.2011.06.013 ↗
44. Thermoelectric property studies on Cu-doped n-type CuxBi2Te2. 7Se0. 3 nanocomposites.10.1002/aenm.201100149 ↗
45. Band engineering and tuning thermoelectric transport properties of p-type Bi0. 52Sb1. 48Te3 by Pb doping for low-temperature power generation10.1016/j.scriptamat.2017.10.009 ↗
46. Synthesis of YbyCo4Sb12∕ Yb2O3 composites and their thermoelectric properties.10.1063/1.2345249 ↗
47. Fabrication and enhanced thermoelectric properties of alumina nanoparticle-dispersed Bi0. 5Sb1. 5Te3 matrix composites10.1155/2013/821657 ↗
48. Reduction of thermal conductivity through the dispersion of tic nanoparticles into a p-type bi0. 5sb1. 5te3 alloy by ball milling and spark plasma sintering
49. New double negative and positive temperature coefficients of conductive EPDM rubber TiC ceramic composites10.1016/S0014-3057(01)00208-7 ↗
50. Enhanced thermoelectric performance of Bi0. 3Sb1. 7Te3 based alloys by dispersing TiC ceramic nanoparticles10.1016/j.jallcom.2020.158376 ↗
51. New double negative and positive temperature coefficients of conductive EPDM rubber TiC ceramic composites10.1016/S0014-3057(01)00208-7 ↗
52. Enhanced thermoelectric performance of β-Zn4Sb3 based nanocomposites through combined effects of density of states resonance and carrier energy filtering10.1038/srep17803 ↗
53. Experimental estimation of the Lorenz number and scattering parameter for p-type bismuth antimony telluride via multiple doping under constant temperature conditions10.1016/j.ceramint.2022.01.119 ↗
54. Strengthening mechanism in graphene nanoplatelets reinforced aluminum composite fabricated through spark plasma sintering10.1016/j.msea.2017.04.009 ↗
55. Consideration of Orowan strengthening effect in particulatereinforced metal matrix nanocomposites: a model for predicting their yield strength10.1016/j.scriptamat.2005.12.017 ↗
56. Enhanced thermoelectric and mechanical properties of Bi0. 5Sb1. 5Te3 alloy with dispersed yttrium oxide ceramic nanoparticles10.1007/s12598-023-02576-7 ↗
57. BiSbTe-based nanocomposites with high ZT: the effect of SiC nanodispersion on thermoelectric properties.10.1002/adfm.201300146 ↗
58. Design of additives with different physical properties to control nanostructures of n-type Bi2Te3 thermoelectric thin films grown by a sputtering process10.1007/s40042-022-00491-1 ↗
59. Microstructure control and thermoelectric properties improvement to n-type bismuth telluride based materials by hot extrusion10.1016/j.jallcom.2006.04.030 ↗
60. Weighted mobility ratio engineering for high-performance Bi–Te-based thermoelectric materials via suppression of minority carrier transport.10.1002/adma.202005931 ↗
61. Thermoelectric materials and transport physics
62. Gradient nanotwins and enhanced weighted mobility synergistically upgrade Bi0. 5Sb1. 5Te3 thermoelectric and mechanical performance10.1002/adfm.202315591 ↗
63. Two-band model interpretation of the p-to n-transition in ternary tetradymite topological insulators10.1063/1.4922857 ↗
64. A high-entropy B 4 (HfMo2 TaTi) C and SiC ceramic composite10.1039/C8DT04555K ↗
65. Crystallographic relations between Ti3SiC2 and TiC10.1007/PL00010876 ↗