Ag-doped Cu-Cr-Zr alloy electrode film by co-sputtering for flexible optoelectronic applications
Source abstract
Abstract
With the development of flexible optoelectronic devices, the research on electrode materials with high conductivity and excellent contact characteristics has received extensive attention. In this study, we successfully prepared Ag-doped Cu-Cr-Zr alloy electrode film by co-sputtering deposition on the glass and PI (polyimide) substrates, respectively. The study aimed to investigate the effect of Ag on the performance of Cu-Cr-Zr alloy electrode film for flexible optoelectronic applications. The results showed that Ag promoted the growth of the film in the direction of {111} crystal plane group and promoted the growth of more prominent grain. Moreover, doped Ag can reduce the porosity of the film. Thus, the resistivity of the film reduced from 3.18 μΩ·cm to 2.32 μΩ·cm after Ag doping. The flexible bending performance of the film was optimized, with the film’s resistivity of the film increasing only 5.6% after 20k bending. Furthermore, the film retained high adhesion strength, rating 4B on the glass substrate and 5B on the PI substrate. The root mean square of the film with a thickness of about 200 nm was less than 1.3 nm which means that the alloy film had good surface morphology. The Ag-doped Cu-Cr-Zr alloy electrode film is expected to have potential applications in flexible optoelectronic devices due to its high conductivity, excellent surface, and optimized flexible bending performance. In conclusion, the Ag-doped Cu-Cr-Zr alloy electrode film prepared in this study is a promising candidate for flexible optoelectronic applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Foldable hard coating materials based on reaction -controlled polysilsesquioxane resin for flexible electronic devices, Progress in Organic Coatings
2. Transparent Soft Actuators/Sensors and Camouflage Skins for Imperceptible Soft Robotics
3. Towards wearable electronic devices: A quasi-solid-state aqueous lithium-ion battery with outstanding stability, flexibility, safety and breathability."10.1016/j.nanoen.2017.12.006 ↗
4. Cotton-based wearable poly(3-hexylthiophene) electronic device for thermoelectric application with cross-plane temperature gradient10.1016/j.tsf.2018.09.046 ↗
5. Printable and flexible electronics: from TFTs to bioelectronic devices
6. Encapsulation of organic field effect tr ansistors for flexible biomedical microimplants10.1016/j.sna.2004.11.021 ↗
7. Copper metallization for ULSL and beyond10.1080/10408439508243732 ↗
8. Adhesive strength of electroplated copper films10.1016/S0924-0136(01)00624-0 ↗
9. A study on the galvanic reaction between Cu and Mo as well as MoW for TFT-LCDs by using a zero-Resistance ammeter10.1889/1.3256542 ↗
10. Ashcroft, First-principles study of adhesion at Cu/SiO2 interfaces
11. Diffusion of Metals in Silicon Dioxide10.1149/1.2108827 ↗
12. Thermal stability of copper interconnects fabricated by dry-etching process10.1016/0040-6090(94)05801-6 ↗
13. The electric field dependence of Cu migration induced dielectric failure in interlayer dielectric for integrated circuits10.1063/1.2714668 ↗
14. Takasawa S., Ishibashi S., Masuda T., Lower Resistivity Wiring Process for TFT Source/Drain Electrodes by Oxygen-mixture Sputtering of Cu-Ca Alloy, SID International Symposium: Digest of Technology Papers, (3):15, (2009).10.1889/1.3256539 ↗
15. Effect of Post Treatment For Cu-Cr Source/Drain Electrodes on a-IGZO TFTs10.3390/ma9080623 ↗
16. High-Performance and Flexible Neodymium- Doped Oxide Semiconductor Thin-Film Transistors With Copper Alloy Bottom-Gate Electrode10.1109/LED.2018.2823304 ↗
17. Highly conductive and adhesive ternary Cu–Cr–Zr alloy electrode for flexible optoelectronic applications10.1016/j.spmi.2021.106989 ↗
18. Alloy-Electrode-Assisted High-Performance Enhancement-Type Neodymium-Doped Indium-Zinc-Oxide Thin-Film Transistors on Polyimide Flexible Substrate10.34133/2021/5758435 ↗
19. Magnetron sputtering of alloy and alloy-based films10.1016/S0040-6090(98)01567-3 ↗