Unveiling the effect of carbon dots on the TiO2-involved electron transport in perovskite solar cells
Source abstract
Abstract
Hydrothermal-synthesized TiO 2 was verified to effectively replace the commercial dyesol-TiO 2 as the electron transport layer for promising perovskite devices. Still, the electron transport ability of this TiO 2 is restricted by the surface defects. Herein, orange carbon dots prepared from p-phenylenediamine were employed as modifiers to regulate the TiO 2 -involved electron transport in perovskite solar cells. The results show that an appropriate amount of CDs can effectively reduce interface electron recombination, TiO 2-CDs layers can improve the lattice growth of subsequent perovskite and result in efficient electron extraction from perovskite to TiO 2 . More importantly, the electron mobility of TiO 2 increases from 3.00 × 10 −5 to 4.13 × 10 −5 cm 2·V −1·s −1 due to the addition of CDs. In terms of photovoltaic performance, the photoelectric conversion efficiency reached 21.14% when TiO 2-CDs were used as the mesoporous electron transfer layer, which is higher than that of TiO 2-based PSCs (17.29%) under the same conditions. Meanwhile, the TiO 2-CDs-based PSCs display negligible hysteresis, better stability and repeatability.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Advanced Photocatalysis Techniques · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
3. Perovskite single-crystal solar cells: advances and challenges10.1002/solr.202101085 ↗
4. Enhanced photoluminescence and solar cell performance via lewis base passivation of organic-inorganic lead halide perovskites10.1021/nn5036476 ↗
5. Single-crystal perovskite solar cells exhibit close to half a millimeter electron diffusion length
6. High efficiency inorganic perovskite solar cells based on low trap density and high carrier mobility CsPbI3 films
7. Phase-pure engineering for efficient and stable formamidinium-based perovskite solar cells10.1002/solr.202200060 ↗
8. Carbon nanomaterials-polymer composites for perovskite solar cells: preparation, properties and applications10.1039/D2TA02175G ↗
9. Superhalogen passivation for efficient and stable perovskite solar cells10.1002/solr.202200013 ↗
10. Review on practical interface engineering of perovskite solar cells: from efficiency to stability10.1002/solr.201900257 ↗
11. Recent progress on interface engineering for high-performance, stable perovskites solar cells10.1002/admi.202000118 ↗
12. Cr2O3 interlayer at TiO2/perovskite interface propelling the efficiency improvement of perovskite solar cells
13. Charge transfer enhancement of TiO2/perovskite interface in perovskite solar cells10.1007/s10854-021-06778-6 ↗
14. Effect of compact TiO2 layer on structural, optical, and performance characteristics of mesoporous perovskite solar cells10.1016/j.mtcomm.2018.12.007 ↗
15. Unveiling the effect of potassium treatment on the mesoporous TiO2/perovskite interface in perovskite solar cells10.1021/acsaem.1c02229 ↗
16. Performance enhancement of perovskite solar cells by doping TiO2 blocking layer with group VB elements10.1016/j.jallcom.2016.10.106 ↗
17. ZrCl4 for energy level alignment at the perovskite/TiO2 interface10.1016/j.electacta.2022.141214 ↗
18. Multifunctional organic additive for improving the open-circuit voltage of perovskite solar cells10.1002/solr.202200296 ↗
19. Improving the performance of perovskite solar cells with insulating additive-modified hole transport layers10.1021/acsami.1c24349 ↗
20. Designed p-type graphene quantum dots to heal interface charge transfer in Sn-Pb perovskite solar cells10.1016/j.nanoen.2022.107298 ↗
21. Hydrophobic graphene quantum dots for defect passivation and enhanced moisture stability of CH3NH3PbI3 perovskite solar cells10.1002/solr.202270072 ↗
22. Enhanced efficiency and stability of n-i-p perovskite solar cells by incorporation of fluorinated graphene in the Spiro-OMeTAD hole transport layer10.1002/aenm.202201344 ↗
23. Foldable perovskite solar cells using carbon nanotube-embedded ultrathin polyimide conductor
24. Property modulation of graphene oxide incorporated with TiO2 for dye-sensitized solar cells10.1021/acsomega.2c05637 ↗
25. The development of carbon dots: From the perspective of materials chemistry10.1016/j.mattod.2021.07.028 ↗
26. Influence of carbon dot synthetic parameters on photophysical and biological properties10.1039/D1NR01389K ↗
27. Carbon dot/inorganic nanomaterial composites10.1039/D2TA02628G ↗
28. Red-carbon-quantum-dot-doped SnO2 composite with enhanced electron mobility for efficient and stable perovskite solar cells10.1002/adma.201906374 ↗
29. Carbon quantum dots/TiOx electron transport layer boosts efficiency of planar heterojunction perovskite solar cells to 19%10.1021/acs.nanolett.6b05177 ↗
30. TiO2 modification with multi-acid treatment for efficient interfacial perovskite-TiO2 electron transport10.1016/j.jallcom.2021.162837 ↗
31. Carbon nanodots with intense emission from green to red and their multifunctional applications10.1016/j.jallcom.2018.01.194 ↗
32. Synthesis of mesoporous TiO2 induced by nanocellulose and its photocatalytic properties10.15376/biores.11.2.3084-3093 ↗
33. A Facile synthesis of mesoporous α-Fe2O3/TiO2 nanocomposites for hydrogen evolution under visible light10.1016/j.ceramint.2020.03.107 ↗
34. Activation of weak monochromic photocurrents by white light irradiation for accurate IPCE measurements of carbon-based multi-porous-layered-electrode perovskite solar cells10.5796/electrochemistry.20-64074 ↗
35. Multi-scalable grain growth via phenyl-C60-butyric acid methyl ester molecular aggregation in perovskite solar cells10.1021/acsaem.1c00826 ↗
36. Effective surface passivation via intermolecular interactions for high-performance perovskite solar cells10.1002/solr.202200082 ↗
37. Enhancing the grain size of organic halide perovskites by sulfonate-carbon nanotube incorporation in high performance perovskite solar cells10.1039/C6CC00268D ↗
38. Graphdiyne-based bulk heterojunction for efficient and moisture-stable planar perovskite solar cells10.1002/aenm.201802012 ↗
39. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals10.1126/science.aaa2725 ↗
40. Defects in metal triiodide perovskite materials towards high-performance solar cells: origin, impact, characterization, and engineering10.1039/C7CS00868F ↗
41. Revealing charge carrier mobility and defect densities in metal halide perovskites via space-charge-limited current measurements10.1021/acsenergylett.0c02599 ↗
42. Highly efficient perovskite solar cells with Ba(OH)2 interface modification of mesoporous TiO2 electron transport layer10.1021/acsaem.8b01271 ↗
43. Enhanced interfacial binding and electron extraction using boron-doped TiO2 for highly efficient hysteresis-free perovskite solar cells10.1002/advs.201901213 ↗
44. Efficient and stable solution-processed planar perovskite solar cells via contact passivation10.1126/science.aai9081 ↗
45. Thiocyanate assisted nucleation for high performance mix-cation perovskite solar cells with improved stability10.1016/j.jpowsour.2020.228320 ↗
46. Importance and advancement of modification engineering in perovskite solar cells10.1002/solr.202200171 ↗
47. Challenges for commercializing perovskite solar cells10.1126/science.aat8235 ↗