Manipulating the phase stability of a halide perovskite, CH3NH3PbI3 by high-pressure cycling
Source abstract
Abstract
Methylammonium lead iodide perovskite, CH 3NH 3PbI 3 (MAPbI 3 ) is a highly promising photovoltaic material, whose structural and electronic properties are very sensitive to applied stresses. Here, we show that the phase stability of a MAPbI 3 crystal can be controlled by structural defects and strains. We synthesized a single crystal of MAPbI 3 and measured its electrical properties across two successive structural phase transitions under applied pressure up to 4–9 GPa under multiple high-pressure cycling. We revealed three types of effects of this high-pressure treatment. ( i) An increasing the level of defects and strains in the crystal greatly delays the first reconstructive phase transition, conserving the ambient-pressure tetragonal phase up to a record pressure of ∼1.4 GPa, much higher compared to its typical stability range of up to 0.3–0.5 GPa only. ( ii ) A time exposure of the crystal at a fixed pressure corresponding to the beginning of the second phase transition to a “destabilized” structure eliminated some of defects and strains; it down-shifted the phase boundaries back. ( iii ) A recrystallization of the sample after pressure-induced amorphization enhanced its structural stability against amorphization upon subsequent pressurization cycle. We proposed that the most abundant defects and strains, which could appear in the pressure-cycled MAPbI 3 crystals, were related to migration of iodine atoms from their regular sites to the MA interstices. Temperature-dependent photoluminescence measurements indicated that the sample recovered after the high-pressure cycling crystallized back into the initial tetragonal crystal structure. Whereas, its stability range expanded toward lower temperatures by 20 K and a band gap slightly increased, from 1.59 to 1.625 eV (at 290 K). Using this organic-inorganic perovskite as an example, we show how the phase stability of such materials can be manipulated by creation and elimination of structural defects and local strains.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Optical properties and cooling technologies in crystalline materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
2. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
3. Advances in SnO 2 for efficient and stable n–i–p perovskite solar cells10.1002/adma.202110438 ↗
4. Single-crystal MAPbI3 perovskite solar cells exceeding 21% power conversion efficiency10.1021/acsenergylett.9b00847 ↗
5. Air-processed MAPbI3 perovskite solar cells achieve 20.87% efficiency and excellent bending resistance enabled via a polymer dual-passivation strategy10.1039/D3DT02080K ↗
6. Realize larger grain size of CH3NH3PbI3 film with reduced non-radiative recombination for high performance perovskite solar cells via precursor colloidal size engineering10.1016/j.jallcom.2021.161300 ↗
7. Stability improvement of MAPbI3-based perovskite solar cells using a photoactive solid-solid phase change material10.1016/j.jallcom.2021.163142 ↗
8. Shedding light on the energy applications of emerging 2D hybrid organic-inorganic halide perovskites
9. Highly efficient perovskite LEDs10.1038/s41578-021-00280-5 ↗
10. Comprehensive defect suppression in perovskite nanocrystals for high-efficiency light-emitting diodes10.1038/s41566-020-00732-4 ↗
11. Highly bright and stable single-crystal perovskite light-emitting diodes10.1038/s41566-023-01167-3 ↗
12. Photodetectors Based on Organic–Inorganic Hybrid Lead Halide Perovskites10.1002/advs.201700256 ↗
13. Lead–halide perovskites for next-generation self-powered photodetectors: a comprehensive review10.1364/PRJ.418450 ↗
14. Hot-pressed CH3NH3PbI3 polycrystalline wafers for near-infrared bioimaging and medical X-ray imaging10.1039/D3TC00760J ↗
15. A high performance Au/CH3NH3PbI3/Cu planar-type self-powered photodetector10.1039/D2TC02477B ↗
16. Effect of Ag nanoparticles on performance of CH3NH3PbI3 perovskite photodetectors10.1016/j.jallcom.2021.158608 ↗
17. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals10.1126/science.aaa2725 ↗
18. Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
19. Low surface recombination velocity in solution-grown CH3NH3PbBr3 perovskite single crystal10.1038/ncomms8961 ↗
20. Effects of precursor concentration and annealing temperature on CH3NH3PbI3 film crystallization and photovoltaic performance10.1016/j.jpcs.2017.03.020 ↗
21. Ultra-Low Thermal Conductivity in Organic–Inorganic Hybrid Perovskite CH3NH3PbI310.1021/jz5012109 ↗
22. Potential applications for perovskite solar cells in space10.1016/j.nanoen.2020.105019 ↗
23. Kudrawiec, Bandgap Pressure Coefficient of a CH3NH3PbI3 Thin Film Perovskite10.1021/acs.jpclett.3c01258 ↗
24. Atomistic origins of CH3NH3PbI3 degradation to PbI2 in vacuum10.1063/1.4916821 ↗
25. Role of surface terminations in the chemical stability of CH3NH3PbI3 perovskite in combined light, H2O, and O2 environments: DFT/AIMD calculations and experimental validation
26. Temperature and pressure induced structural transitions of lead iodide perovskites10.1039/D3TA05315F ↗
27. Visible light response, electrical transport, and amorphization in compressed organolead iodine perovskites10.1039/C5NR07842C ↗
28. Probing structure–property relationship in chemical vapor deposited hybrid perovskites by pressure and temperature10.1557/s43578-021-00229-y ↗
29. Pressure-Dependent Polymorphism and Band-Gap Tuning of Methylammonium Lead Iodide Perovskite10.1002/anie.201601788 ↗
30. Mechanism of Pressure-Induced Phase Transitions, Amorphization, and Absorption-Edge Shift in Photovoltaic Methylammonium Lead Iodide10.1021/acs.jpclett.6b01648 ↗
31. High-pressure behavior of methylammonium lead iodide (MAPbI3) hybrid perovskite10.1063/1.4948577 ↗
32. Dynamic disorder in methylammoniumtrihalogenoplumbates (II) observed by millimeter-wave spectroscopy10.1063/1.453467 ↗
33. Calorimetric and IR spectroscopic studies of phase transitions in methylammonium trihalogenoplumbates (II)10.1016/0022-3697(90)90021-7 ↗
34. Structural Study on Cubic–Tetragonal Transition of CH3NH3PbI310.1143/JPSJ.71.1694 ↗
35. Complete structure and cation orientation in the perovskite photovoltaic methylammonium lead iodide between 100 and 352 K10.1039/C4CC09944C ↗
36. Pressure-Induced Effects in Organic–Inorganic Hybrid Perovskites10.1021/acs.jpclett.7b00347 ↗
37. Photovoltaic Hybrid Perovskites under Pressure10.1021/acs.jpclett.7b00520 ↗
38. High-pressure structural and optical properties of organic-inorganic hybrid perovskite CH3NH3PbI3, Acta Phys
39. Simultaneous band-gap narrowing and carrier-lifetime prolongation of organic-inorganic trihalide perovskites10.1073/pnas.1609030113 ↗
40. Indirect to direct bandgap transition in methylammonium lead halide perovskite10.1039/C6EE03474H ↗
41. Optical behaviors of a microsized single-crystal MAPbI3 plate under high pressure10.1021/acs.jpcc.9b10416 ↗
42. K. Wang, R. Liu, Y. Qiao, J. Cui, B. Song, B. Liu, B. Zou, Pressure-induced reversible phase transition and amorphization of CH3NH3PbI3, ArXiv:1509.03717v1 (2015).
43. High-Pressure Single-Crystal Structures of 3D Lead-Halide Hybrid Perovskites and Pressure Effects on their Electronic and Optical Properties10.1021/acscentsci.6b00055 ↗
44. Pressure-induced transformation of CH3NH3PbI3: the role of the noble-gas pressure transmitting media10.1107/S2052520619004554 ↗
45. Pressure-induced locking of methylammonium cations versus amorphization in hybrid lead iodide perovskites10.1021/acs.jpcc.8b05188 ↗
46. Pressure-induced metallization of the halide perovskite (CH3NH3)PbI310.1021/jacs.7b01162 ↗
47. High-pressure investigations in CH3NH3PbX3 (X=I, Br, and Cl)
48. Equal footing of thermal expansion and electron–phonon interaction in the temperature dependence of lead halide perovskite band gaps10.1021/acs.jpclett.9b00876 ↗
49. Structural regulation and optical behavior of three-dimensional metal halide perovskites under pressure10.1039/D0TC02796K ↗
50. Unusual pressure-induced electronic structure evolution in organometal halide perovskite predicted from first-principles10.1016/j.orgel.2019.01.003 ↗
51. Effect of hydrostatic pressure on the structural phase transitions in CH3NH3PbX3 (X = Cl, Br, I)10.1080/00150199708012851 ↗
52. First-principles calculations of the structural and elastic properties of CH3NH3PbI3 under high pressure10.1007/s13538-021-01003-5 ↗
53. Phase transition pathway of hybrid halide perovskites under compression: Insights from first-principles calculations
54. Effect of pressure-induced structural phase transition on electronic and optical properties of perovskite CH3NH3PbI310.1016/j.mssp.2019.01.038 ↗
55. Defect activity in lead halide perovskites10.1002/adma.201901183 ↗
56. Advanced spectroscopic techniques for characterizing defects in perovskite solar cells10.1038/s43246-023-00379-y ↗
57. Physics of defects in metal halide perovskites10.1088/1361-6633/ac7c7a ↗
58. Defect-induced local variation of crystal phase transition temperature in metal-halide perovskites10.1038/s41467-017-00058-w ↗
59. Enhanced structural stability and photo responsiveness of CH3NH3SnI3 perovskite via pressure-induced amorphization and recrystallization10.1002/adma.201600771 ↗
60. Perovskite CH3NH3PbI3 crystals and films. Synthesis and characterization10.1016/j.jcrysgro.2017.01.019 ↗
61. CH3NH3PbI3 crystal growth, structure and composition10.1088/1742-6596/1124/4/041008 ↗
62. Measurement of Seebeck effect (thermoelectric power) at high pressure up to 40GPa10.1016/j.jpcs.2010.03.028 ↗
63. Automated portable high-pressure setup for study of phase transitions in solids10.1016/j.jpcs.2006.06.004 ↗
64. Ultra-high pressure apparatus10.1016/0370-1573(88)90174-3 ↗
65. Toroid type high-pressure device: history and prospects10.1080/08957950412331298761 ↗
66. Eremets · 1996
67. A composite high-pressure cell with sintered diamond insets for study of thermoelectric and thermomagnetic properties in a range up to 30GPa: Application to Pr and PbTe10.1016/j.jpcs.2008.04.009 ↗
68. A Hard oxide semiconductor with a direct and narrow bandgap and switchable p-n electrical conduction10.1002/adma.201403304 ↗
69. Colossal enhancement of the thermoelectric power factor in stress-released orthorhombic phase of SnTe10.1063/5.0043954 ↗
70. Giant room-temperature power factor in p -type thermoelectric SnSe under high pressure10.1002/advs.202103720 ↗
71. Using pressure to unravel the structure–dynamic-disorder relationship in metal halide perovskites10.1038/s41598-023-36501-w ↗
72. Inhibition of defect-induced α-to-δ phase transition for efficient and stable formamidinium perovskite solar cells10.1038/s41467-023-41853-y ↗
73. Correlation of elastic and optoelectronic properties near structural phase transition in organic–inorganic lead iodide perovskite single crystals10.1088/1361-648X/abb9bb ↗
74. Temperature-dependent charge-carrier dynamics in CH3NH3PbI3 perovskite thin films10.1002/adfm.201502340 ↗
75. CH3NH3PbI3, A Potential Solar Cell Candidate: Structural and Spectroscopic Investigations10.1021/acs.jpca.6b09718 ↗
76. Phase diagram of methylammonium/formamidinium lead iodide perovskite solid solutions from temperature-dependent photoluminescence and raman spectroscopies10.1021/acs.jpcc.9b10185 ↗
77. Stress-controlled n–p conductivity switch based on intercalated ZrTe210.1063/5.0050611 ↗
78. Controlling the semiconductor–metal transition in Cu-intercalated TiSe2 by applying stress10.1039/D3TC00210A ↗