journal article·2024-03

Effects of high-valence Mo content on microstructure and properties of Ba2Fe2-Mo O6- anode materials for solid oxide fuel cells

Xiangming Bao, Zixian Wang, Zhaoyuan Song, Xi Chen, Xiaogang Su, Xu Han, Leilei Zhang

Publisher page

Abstract

Double perovskites Ba 2Fe 2-xMo xO 6-δ (BFMo x, x = 1.0–0.3) were investigated as anodes of solid oxide fuel cells (SOFCs). In H 2, all the BFMo x samples exhibit sufficient electrical conductivities (σ > 2 S cm −1) at 600–800 °C. However, the BFMo 0.7 and BFMo 0.5 compositions exhibit relatively better redox stability than the others. Furthermore, using 250-μm-thick La 0.9Sr 0.1Ga 0.8Mg 0.2O 3-δ as electrolyte and Ba 0.6Sr 0.4Co 0.9Nb 0.1O 3-δ as cathode , the BFMo 0.7 and BFMo 0.5 anode cells also show higher electrochemical performances with peak power density attaining 905 and 908 mW cm −2, respectively, at 800 °C. Additi°nally, the BFMo 0.7 and BFMo 0.5 anodes show good electrochemical stability for long-term H 2 oxidation. However, the BFMo 0.7 anode exhibits an especially high thermal expansion coefficient (TEC) ∼61.9 × 10 −6 K −1 at 25–886 °C in air, nearly three times larger than that of the BFMo 0.5 anode under the same condition (TEC=∼14.8 ×10 −6 K −1). In view of this, the BFMo 0.5 is considered to be a preferred anode candidate for SOFC.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Materials for fuel-cell technologies10.1038/35104620 ↗
2. Direct CH4 fuel cell using Sr2FeMoO6 as an anode material10.1016/j.jpowsour.2011.03.053 ↗
3. Evaluation of Li2O as an efficient sintering aid for gadolinia-doped ceria electrolyte for solid oxide fuel cells10.1016/j.jpowsour.2014.03.010 ↗
4. Performance evaluation of an anode-supported solid oxide fuel cell with Ce0.8Sm0.2O1.9 impregnated GdBaCo2O5+δ cathode10.1016/j.ijhydene.2012.06.102 ↗
5. Performance degradation of double-perovskite PrBaCo2O5+δoxygen electrode in CO2 containing atmospheres10.1016/j.apsusc.2017.03.298 ↗
6. Review of anodic reactions in hydrocarbon fueled solid oxide fuel cells and strategies to improve anode performance and stability10.1007/s40243-020-0166-8 ↗
7. The effect of H2S on the performance of Ni-YSZ anodes in solid oxide fuel cells10.1016/j.jpowsour.2009.02.001 ↗
8. Sr2Fe4/3Mo2/3O6 as anodes for solid oxide fuel cells10.1016/j.jpowsour.2010.07.036 ↗
9. Effects of Sr-site deficiency on structure and electrochemical performance in Sr2MgMoO6 for solid-oxide fuel cell10.1016/j.jpowsour.2014.07.079 ↗
10. Double perovskites as anode materials for solid-oxide fuel cells10.1126/science.1125877 ↗
11. Double-perovskite anode materials Sr2MMoO6 (M = Co, Ni) for solid oxide fuel cells10.1021/cm8033643 ↗
12. Sr2Fe2-xMoxO6-δ perovskite as an anode in a solid oxide fuel cell: Effect of the substitution ratio10.1016/j.cattod.2015.04.025 ↗
13. Degree of order and redox balance in B-site ordered double-perovskite oxides, Sr2MMoO6-δ (M=Mg, Mn, Fe, Co, Ni, Zn)10.1016/j.jssc.2010.03.004 ↗
14. Sr- and Mo-deficiency Sr1.95TiMo1-xO6-δ double perovskites as anodes for solid-oxide fuel cells using H2S-containing syngas10.1016/j.ijhydene.2020.06.115 ↗
15. Superior electrochemical performance of non-precious Co-Ni-Mo alloy catalyst-impregnated Sr2FeMoO6-δ as an electrode material for symmetric solid oxide fuel cells10.1016/j.electacta.2016.07.037 ↗
16. Double-perovskites A2FeMoO6-δ (A = Ca, Sr, Ba) as anodes for solid oxide fuel cells10.1016/j.jpowsour.2010.04.021 ↗
17. Sr2Fe1.5Mo0.5O6-δ as a regenerative anode for solid oxide fuel cells10.1016/j.jpowsour.2011.06.085 ↗
18. Fast ion transport in solids, solid state batteries and devices10.1149/1.2402375 ↗
19. Pouchard · 1978
20. A study of oxygen ion conductivity in doped non-stoichiometric oxides10.1016/0167-2738(82)90045-5 ↗
21. Progress in Solid Electrolytes
22. Fast anion transport in solids10.1016/0167-2738(83)90017-6 ↗
23. A crystallographic search program for oxygen-conducting electrolytes10.1016/S0167-2738(88)80087-0 ↗
24. Factors controlling the oxide ion conductivity of fluorite and perovskite structured oxides10.1016/j.ssi.2004.07.036 ↗
25. Novel cobalt-free oxygen permeable membrane10.1039/b400857j ↗
26. A new family of barium-doped Sr2Fe1.5Mo0.5O6-δ perovskites for application in intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2014.05.146 ↗
27. Rational selection of advanced solid electrolytes for intermediate temperature fuel cells10.1016/0167-2738(92)90097-9 ↗
28. Re-evaluation of Ba0.5Sr0.5Co0.8Fe0.2O3-δ perovskite as oxygen semi-permeable membrane10.1016/j.memsci.2007.01.003 ↗
29. Electrochemical performance of double-perovskite Ba2MMoO6 (M = Fe, Co, Mn, Ni) anode materials for solid oxide fuel cells10.1016/j.jpowsour.2011.09.092 ↗
30. Double perovskite Ba2FeMoO6-δ as fuel electrode for protonic-ceramic membranes10.1016/j.ssi.2017.04.007 ↗
31. A- and B-site doping effect on physicochemical properties of Sr2-xBaxMMoO6 (M=Mg, Mn, Fe) double perovskites - candidate anode materials for SOFCs10.1142/S1793604716410022 ↗
32. Improved thermal expansion and electrochemical performances of Ba0.6Sr0.4Co0.9Nb0.1O3-δ-Gd0.1Ce0.9O1.95 composite cathodes for IT-SOFCs10.1016/j.ijhydene.2014.03.055 ↗
33. Preparation and electrochemical properties of La1.5Pr0.5NiO4 and La1.5Pr0.5Ni0.9Cu0.1O4 cathode materials for intermediate-temperature solid oxide fuel cells10.1016/j.materresbull.2019.01.016 ↗
34. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
35. Surprisingly high activity for oxygen reduction reaction of selected oxides lacking long oxygen-ion diffusion paths at intermediate temperatures: a case study of cobalt-free BaFeO3-δ10.1021/am502240m ↗
36. Cobalt-free perovskite cathode BaFe0.9Nb0.1O3-δ for intermediate-temperature solid oxide fuel cell10.1016/j.jallcom.2021.159701 ↗
37. Role of SrMoO4 in Sr2MgMoO6 synthesis10.1016/j.jssc.2011.03.045 ↗
38. Promoted CO2-poisoning resistance of La0.8Sr0.2MnO3-δ-coated Ba0.5Sr0.5Co0.8Fe0.2O3-δ cathode for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2016.07.074 ↗
39. Assessment of cobalt-free ferrite-based perovskite Ln0.5Sr0.5Fe0.9Mo0.1O3-δ (Ln = lanthanide) as cathodes for IT-SOFCs10.1016/j.jeurceramsoc.2020.11.035 ↗
40. Investigation of Ba fully occupied A-site BaCo0.7Fe0.3-xNbxO3-δ perovskite stabilized by low concentration of Nb for oxygen permeation membrane10.1016/j.memsci.2008.05.065 ↗
41. Alkaline-earth elements (Ca, Sr, and Ba) doped LaFeO3-δ cathodes for CO2 electroreduction10.1016/j.jpowsour.2019.227268 ↗
42. Preparation, surface state and band structure studies of SrTi(1-x)Fe(x)O(3-δ) (x=0-1) perovskite-type nano structure by X-ray and ultraviolet photoelectron spectroscopy10.1016/j.susc.2011.12.013 ↗
43. Characterization of Ta/W co-doped SrFeO3-δ perovskite as cathode for solid oxide fuel cells10.1016/j.jallcom.2019.05.096 ↗
44. Characterization of high-valence Mo-doped PrBaCo2O5+δ cathodes for IT-SOFCs10.1016/j.jallcom.2020.155600 ↗
45. Characterization of SrFe0.9-xCuxMo0.1O3-δ (x = 0, 0.1 and 0.2) as cathode for intermediate-temperature solid oxide fuel cells, Int. J10.1002/er.6156 ↗
46. Synthesis and characterization of Mo-doped SrFeO3-δ as cathode materials for solid oxide fuel cells10.1016/j.jpowsour.2011.11.021 ↗
47. High performance ferrite-based anode La0.5Sr0.5Fe0.9Mo0.1O3-δ for intermediate-temperature solid oxide fuel cell10.1016/j.electacta.2017.09.157 ↗
48. A redox- reversible perovskite electrode for CeO2- and LaGaO3- based symmetric solid oxide fuel cells10.1016/j.ceramint.2022.05.338 ↗
49. Investigation of Sc doped Sr2Fe1.5Mo0.5O6 as a cathode material for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2017.01.063 ↗
50. Effect of Cl doping on the electrochemical performance of Sr2Fe1.5Mo0.5O6-δ cathode material for solid oxide fuel cells10.1016/j.ceramint.2020.06.046 ↗
51. Oxygen vacancy-engineered cobalt-free Ruddlesden-Popper cathode with excellent CO2 tolerance for solid oxide fuel cells10.1016/j.jpowsour.2021.229872 ↗
52. Room-temperature magnetoresistance in an oxide material with an ordered double-perovskite structure10.1038/27167 ↗
53. Interaction between the d-Shells in the transition metals. II. Ferromagnetic compounds of manganese with perovskite structure10.1103/PhysRev.82.403 ↗
54. Advanced anodes for high-temperature fuel cells10.1038/nmat1040 ↗
55. Oxide anode materials for solid oxide fuel cells10.1016/j.ssi.2006.07.012 ↗
56. High-performance anode material Sr2FeMo0.65Ni0.35O6-δ with In Situ exsolved nanoparticle catalyst10.1021/acsnano.6b03979 ↗
57. Optimization of strontium molybdate based composite anode for solid oxide fuel cells10.1016/j.jpowsour.2014.10.062 ↗
58. Electrical conductivity, thermal expansion and electrochemical performances of Ba-doped SrCo0.9Nb0.1O3-δ cathodes for IT-SOFCs10.1016/j.ijhydene.2013.04.107 ↗
59. Hydrogen evolution from native biomass with Fe3+/Fe2+ redox couple catalyzed electrolysis10.1016/j.electacta.2017.06.124 ↗