Two-in-one additive engineering strategy induced high-quality CsPbBr3 film in printable mesoscopic perovskite solar cells
Source abstract
Abstract
The use of all-inorganic cesium lead tribromide (CsPbBr 3 ) in photovoltaics has gained significant attention due to its outstanding environmental stability and low cost of preparation. Printable perovskite solar cells (PSCs) based on CsPbBr 3 have demonstrated a more straightforward fabrication procedure and remarkable stability, indicating great development potential. However, the preparation of the CsPbBr 3 film can be challenging, as it requires depositing a high-quality PbBr 2 film in a triple-layer porous scaffold and avoiding the incomplete conversion of PbBr 2 in the subsequent step. Herein, we propose a two-in-one additive engineering strategy using 4-tert-Butylpyridine (TBP) into the PbBr 2 solution and dimethyl sulfoxide (DMSO) to the CsBr precursor. The improved perovskite layer with better infiltration in scaffold, low carrier recombination rate and high absorption ability results in the boosting performance of PSCs. When the TBP is coupled with DMSO to fabricate printable mesoscopic CsPbBr 3 PSCs, the device achieves a power conversion efficiency as high as 8.36 %. Furthemore, the modified CsPbBr 3 PSC without any encapsulation retains above 97 % of its initial efficiency after 1600 h of storage in ambient air, indicating outstanding stability.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · TiO2 Photocatalysis and Solar Cells · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
2. Unique properties of halide perovskites as possible origins of the superior solar cell performance10.1002/adma.201306281 ↗
3. Ultrasmooth organic–inorganic perovskite thin-film formation and crystallization for efficient planar heterojunction solar cells10.1038/ncomms7142 ↗
4. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
5. Improving the stability of perovskite solar cells10.1126/science.354.6309.192-b ↗
6. A review of perovskites solar cell stability
7. Multifunctional self-combustion additives strategy to fabricate highly responsive hybrid perovskite photodetectors10.1021/acsami.0c08485 ↗
8. Structure engineering of hierarchical layered perovskite interface for efficient and stable wide bandgap photovoltaics10.1016/j.nanoen.2020.104917 ↗
9. Towards extending solar cell lifetimes: addition of a fluorous cation to triple cation-based perovskite films10.1002/cssc.201700797 ↗
10. Inorganic caesium lead iodide perovskite solar cells10.1039/C5TA06398A ↗
11. Integrated 4-terminal all-inorganic perovskite tandem solar cell with open-circuit voltage exceeding 2.1 V for water splitting10.1021/acsenergylett.2c02262 ↗
12. Thermal stability of CsPbBr3 perovskite as revealed by in situ transmission electron microscop10.1063/1.5108849 ↗
13. Alkyl‐chain‐regulated charge transfer in fluorescent inorganic CsPbBr3 perovskite solar cells10.1002/anie.202000199 ↗
14. Enhanced efficiency of air-stable CsPbBr3 perovskite solar cells by defect dual passivation and grain size enlargement with a multifunctional additive10.1021/acsami.0c08827 ↗
15. Recent progress on all-inorganic metal halide perovskite solar cells
16. Minimizing the voltage loss in hole‐conductor‐free printable mesoscopic perovskite solar cells10.1002/aenm.202102229 ↗
17. Improvement and regeneration of perovskite solar cells via methylamine gas post-treatment10.1002/adfm.201703060 ↗
18. A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability10.1126/science.1254763 ↗
19. Amide additives induced a fermi level shift to improve the performance of hole-conductor-free, printable mesoscopic perovskite solar cells10.1021/acs.jpclett.9b02463 ↗
20. High performance printable perovskite solar cells based on Cs0.1FA0.9PbI3 in mesoporous scaffolds10.1016/j.jpowsour.2019.01.065 ↗
21. Recent progress in inorganic tin perovskite solar cells
22. Highly stable all-inorganic perovskite solar cells processed at low temperature10.1002/solr.201800075 ↗
23. Slow surface passivation and crystal relaxation with additives to improve device performance and durability for tin-based perovskite solar cells10.1039/C8EE00956B ↗
24. Controllable perovskite crystallization via antisolvent technique using chloride additives for highly efficient planar perovskite solar cells10.1002/aenm.201803587 ↗
25. Additive engineering for efficient and stable perovskite solar cells
26. Multi-site passivation-based antisolvent additive engineering with gradient distribution for superior triple cation P-I-N perovskite solar cells10.1016/j.nanoen.2022.107193 ↗
27. Incorporating 4- tert -butylpyridine in an antisolvent: a facile approach to obtain highly efficient and stable perovskite solar cells10.1021/acsami.7b16912 ↗
28. 4-Tert butylpyridine induced MAPbI3 film quality enhancement for improving the photovoltaic performance of perovskite solar cells with two-step deposition route10.1016/j.apsusc.2019.04.069 ↗
29. 4-tert-butyl pyridine additive for moisture-resistant wide bandgap perovskite solar cells10.1016/j.optmat.2021.111876 ↗
30. The effects of pyridine molecules structure on the defects passivation of perovskite solar cells10.1007/s10008-021-04905-1 ↗
31. DMF as an additive in a two-step spin-coating method for 20% conversion efficiency in perovskite solar cells10.1021/acsami.7b08504 ↗
32. Solvent-engineering toward CsPb(IxBr1−x)3 films for high-performance inorganic perovskite solar cells10.1039/C8TA07968D ↗
33. Grain enlargement and defect passivation with melamine additives for high efficiency and stable CsPbBr3 perovskite solar cells10.1002/cssc.201903288 ↗
34. Water, a green solvent for fabrication of high-quality CsPbBr3 films for efficient solar cells10.1021/acsami.9b20376 ↗
35. High-purity inorganic perovskite films for solar cells with 9.72% efficiency10.1002/anie.201800019 ↗
36. Mesoporous-carbon-based fully-printable all-inorganic monoclinic cspbbr3 perovskite solar cells with ultrastability under high temperature and high humidity10.1021/acs.jpclett.0c02739 ↗
37. Trivalent europium ions doped CsPbBr3 for highly efficient and stable printable mesoscopic perovskite solar cells and driving water electrolysis10.1002/solr.202200361 ↗
38. Understanding steric-charge-dependence of conjugated passivators on π-Pb2+ bond strength for efficient all-inorganic perovskite solar cells10.1016/j.cej.2021.134230 ↗
39. Influence of different concentrations of 4-tert-butyl-pyridine in a gel polymer electrolyte towards improved performance of dye-sensitized solar cells (DSSC)10.1016/j.solener.2020.12.058 ↗
40. Investigating the role of 4- Tert butylpyridine in perovskite solar cells10.1002/aenm.201601079 ↗