Wet-chemical surface texturing of AZO substrate for improved perovskite solar cells
Source abstract
Abstract
Aluminum-doped zinc oxide (AZO) is a promising substrate for perovskite solar cells (PSCs) because of its low cost, easy accessibility, and good conductivity. However, its relatively low transmittance with low resistance and inevitable reflectance loss makes it unfavorable for high-performance AZO-based PSCs. Herein, a simple and effective strategy that textures the surface of AZO substrate via a diluted HCl etching, is developed to boost PSC performance. The textured AZO substrate exhibits greater haze, higher transmittance, and lower reflectance for permitting more photons to reach and be absorbed within PSCs. In addition, the textured AZO substrate not only exhibits improved surface wettability that can enhance the buried interfacial contact and enable the growth of high-quality perovskite film, but also possesses reduced oxygen vacancies and lower work function (WF) that can suppress the recombination and reduce the energy barrier for electron extraction. As a result, the PSC on textured AZO substrate shows improved fill factor (FF, 70 %) and enhanced short-circuit current density (J sc, 23.7 mA/cm 2) compared with the reference cells (63 % and 21.1 mA/cm 2 ), yielding a much-increased power conversion efficiency (PCE) from 13.9 % to 17.6 %. The present work opens the door for the employment of AZO substrate in future commercialization of PSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Solar cell efficiency tables (Version 61)10.1002/pip.3646 ↗
2. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
3. Ultrahydrophobic 3D/2D fluoroarene bilayer-based water-resistant perovskite solar cells with efficiencies exceeding 22 %10.1126/sciadv.aaw2543 ↗
4. Conformal quantum dot–SnO2 layers as electron transporters for efficient perovskite solar cells10.1126/science.abh1885 ↗
5. Power output stabilizing feature in perovskite solar cells at operating condition: selective contact-dependent charge recombination dynamics10.1016/j.nanoen.2019.04.051 ↗
6. The effect of B-site doping in all-inorganic CsPbIxBr3−x absorbers on the performance and stability of perovskite photovoltaics10.1039/D2EE01070D ↗
7. Interface modification to achieve high-efficiency and stable perovskite solar cells10.1016/j.cej.2022.134613 ↗
8. Facile NaF treatment achieves 20 % efficient ETL-free perovskite solar cells10.1021/acsami.2c06110 ↗
9. Cost-performance analysis of perovskite solar modules10.1002/advs.201600269 ↗
10. Rear electrode materials for perovskite solar cells
11. An indium-free anode for large-area flexible OLEDs: defect-free transparent conductive zinc tin oxide10.1002/adfm.201503753 ↗
12. Application of indium tin oxide/aluminum-doped zinc oxide transparent conductive oxide stack films in silicon heterojunction solar cells10.1021/acsaem.1c02209 ↗
13. Room-temperature sputtered aluminum-doped zinc oxide for semitransparent perovskite solar cells10.1021/acsaem.0c01081 ↗
14. Atomic layer engineering of aluminum-doped zinc oxide films for efficient and stable perovskite solar cells10.1002/admi.202200575 ↗
15. Improved performance and reliability of p-i-n perovskite solar cells via doped metal oxides10.1002/aenm.201600285 ↗
16. Indium-free flexible perovskite solar cells with AZO/Cu/Ag/AZO multilayer transparent electrodes
17. Increased efficiency for perovskite photovoltaics based on aluminum-doped zinc oxide transparent electrodes via surface modification10.1021/acs.jpcc.7b00419 ↗
18. Enhanced thermal stability of electron transport layer-free perovskite solar cells via interface strain releasing10.1016/j.jpowsour.2019.227091 ↗
19. Performance enhancement of all-inorganic carbon-based CsPbIBr2 perovskite solar cells using a moth-eye anti-reflector10.3390/nano11102726 ↗
20. Organic-acid texturing of transparent electrodes toward broadband light trapping in thin-film solar cells10.1016/j.nanoen.2015.08.015 ↗
21. Dominant effect of the grain size of the MAPbI3 perovskite controlled by the surface roughness of TiO2 on the performance of perovskite solar cells10.1039/D0CE00169D ↗
22. Low temperature processed, high-performance and stable NiOx based inverted planar perovskite solar cells via a poly(2-ethyl-2-oxazoline) nanodots cathode electron-extraction layer
23. Synergistic interface energy band alignment optimization and defect passivation toward efficient and simple-structured perovskite solar cell10.1002/advs.201902656 ↗
24. Coordinated optical matching of a texture interface made from demixing blended polymers for high-performance inverted perovskite solar cells10.1021/acsnano.9b07594 ↗
25. Organic-acid texturing of transparent electrodes toward broadband light trapping in thin-film solar cells10.1016/j.nanoen.2015.08.015 ↗
26. Vapor textured aluminum-doped zinc oxide on cellophane paper for flexible thin film solar cells10.1016/j.solmat.2018.08.025 ↗
27. Using the light scattering properties of multi-textured AZO films on inverted hemisphere textured glass surface morphologies to improve the efficiency of silicon thin film solar cells10.1016/j.apsusc.2018.03.143 ↗
28. Quinary nanocrystal-based passivation strategy for high efficiency and stable perovskite photovoltaics10.1002/solr.202100737 ↗
29. Enhanced performance in Al-doped ZnO based transparent flexible transparent thin-film transistors due to oxygen vacancy in ZnO film with Zn-Al-O interfaces fabricated by atomic layer deposition10.1021/acsami.7b02609 ↗
30. Interface engineering in n-i-p metal halide perovskite solar cells
31. Al-doped ZnO transparent conducting oxide with appealing electro-optical properties – realization of indium free transparent conductors from sputtering targets with varying dopant concentrations
32. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO210.1038/s41467-018-05760-x ↗
33. Enlarging grain sizes for efficient perovskite solar cells by methylamine chloride assisted recrystallization10.1016/j.jechem.2021.05.026 ↗
34. Highly efficient (200) oriented MAPbI3 perovskite solar cells10.1016/j.cej.2021.133845 ↗
35. Dramatically promoted crystallization control of organolead triiodide perovskite film by a homogeneous cap for high efficiency planar-heterojunction solar cells10.1039/C6TA04332A ↗
36. Optical, electrical and structural properties of aluminum-doped nano-zinc oxide thin films deposited by magnetron sputtering10.1007/s10854-014-2457-2 ↗
37. Effect of substrate temperature on photoelectric properties of AZO thin films10.1002/pssa.202200684 ↗
38. High-performance planar-heterojunction solar cells based on ternary halide large-band-gap perovskites10.1002/aenm.201400960 ↗
39. Enhancing the optical, morphological and electronic properties of the solution-processed CsPbIBr2 films by Li doping for efficient carbon-based perovskite solar cells10.1016/j.apsusc.2019.143990 ↗
40. MXene-modulated electrode/SnO2 interface boosting charge transport in perovskite solar cells10.1021/acsami.0c17338 ↗
41. Enhanced light absorption of thin perovskite solar cells using textured substrates10.1016/j.solmat.2017.04.038 ↗
42. Highly-improved performance of inverted planar perovskite solar cells by glucose modification10.1039/D0TC00365D ↗
43. Simultaneous power conversion efficiency and stability enhancement of Cs2AgBiBr6 lead-free inorganic perovskite solar cell through adopting a multifunctional dye interlayer