journal article·2025-01

Improved piezo-photocatalytic activity by controlling the oxygen vacancy content of NaNbO3 powders

Qiwei Sun, Qiuyan Yi, Hang Luo, Qiong Liu, Dou Zhang

Publisher page

Abstract

The sintering temperature of solid-state synthesis exceeds 1000 °C, which easily leads to the formation of oxygen vacancies. The presence of oxygen vacancies can alter the electronic/crystal structure and surface chemical properties of perovskite oxides. In this work, the content of oxygen vacancy of NaNbO 3 are controlled by adjusting the heat treatment conditions including atmosphere, temperature, and time. XPS and EPR are used to analyze the relative content of oxygen vacancies. The N 2 heat treatment time is 3 h, and as the temperature increases from 300 °C to 900 °C, the oxygen vacancy content increases from 16.4 % to 18.9 %. At 900 °C, the time is extended to 5 h, and the oxygen vacancy content increased to 26.4 %. The disordered outer structure in HRTEM images confirms the existence of oxygen vacancies. The effect of the presence of oxygen vacancy on the efficiency of piezocatalysis and piezo-photocatalysis of NaNbO 3 is cleared. The NaNbO 3 sample heat-treated in N 2 for 3 h (named NN-3h N 2) showed the best piezo-photocatalytic performance, with a rate constant (k) of 0.19175 min −1, which is much higher than the unmodified NaNbO 3 (0.11777 min −1). The electrochemical test results show that the NN-3h N 2 sample has better charge transfer ability and stronger photocurrent response, indicating that the presence of oxygen vacancies improves the migration and transfer efficiency of charge carriers. The volcanic trend indicates that an appropriate oxygen vacancy content is beneficial to the improvement of piezo-photocatalytic performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · Perovskite Materials and Applications · Luminescence Properties of Advanced Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Effect of MQL on the microstructure and strength of friction stir welded 6061 Al alloy10.1007/s00170-018-2957-y ↗
2. Multi-objective optimization and experimental investigation of friction stir welding under minimum quantity lubrication
3. Improved informer PV power short-term prediction model based on weather typing and AHA-VMD-MPE10.1016/j.energy.2024.132766 ↗
4. Revealing the degradation patterns of lithium-ion batteries from impedance spectroscopy using variational auto-encoders
5. Homonuclear transition-metal dimers embedded monolayer C2N as promising anchoring and electrocatalytic materials for lithium-sulfur battery: first-principles calculations10.1016/j.apsusc.2022.155507 ↗
6. Research progress in fault detection of battery systems: a review10.1016/j.est.2024.113079 ↗
7. Readily achieving concentration-tunable oxygen vacancies in Bi2O2CO3: triple-functional role for efficient visible-light photocatalytic redox performance10.1016/j.apcatb.2017.12.074 ↗
8. Synergetic effect of CQD and oxygen vacancy to TiO2 photocatalyst for boosting visible photocatalytic NO removal10.1016/j.jhazmat.2023.131237 ↗
9. Defect engineering of bismuth oxyiodide by OI3- doping for increasing charge transport in photocatalysis10.1021/acsami.6b10653 ↗
10. Impact of oxygen vacancy occupancy on piezo-catalytic activity of BaTiO3 nanobelt10.1016/j.apcatb.2020.119340 ↗
11. Excellent catalytic performance of molten-salt-synthesized Bi0.5Na0.5TiO3 nanorods by the piezo-phototronic coupling effect10.1016/j.nanoen.2021.105936 ↗
12. Enhanced catalytic activity of Molar-like BaTiO3 by oxygen vacancies10.1016/j.ceramint.2023.09.332 ↗
13. Magnetic and electrical properties of LBaMn2O6-γ (L=Pr, Nd, Sm, Eu, Gd, Tb) manganites10.1103/PhysRevB.66.184424 ↗
14. The role of oxygen vacancies of ABO3 perovskite oxides in the oxygen reduction reaction10.1039/D0EE00092B ↗
15. Improved energy storage performance of sandwich-structured P(VDF-HFP)-based nanocomposites by the addition of inorganic nanoparticles10.1039/D3TC00979C ↗
16. Evolution of structure and physical properties in Al-substituted Ba-hexaferrites10.1088/1674-1056/25/1/016102 ↗
17. Structure, magnetic, and electrodynamic properties of SrInxFe12-xO4/Ni0.5Zn0.5Fe2O4 composites at low temperature10.1111/jace.19798 ↗
18. Ultra-low temperature co-fired ceramics with adjustable microwave dielectric properties in the Na2O-Bi2O3-MoO3 ternary system: a comprehensive study10.1039/D1TC05557G ↗
19. Effect of gallium doping on electromagnetic properties of barium hexaferrite10.1016/j.jpcs.2017.07.014 ↗
20. Impact of thermobaric conditions on phase content, magnetic and electrical properties of the CoFe2O4 ceramics10.1016/j.jallcom.2023.170083 ↗
21. Defective TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications10.1039/c3nr00476g ↗
22. Tunable phase structure in NaNbO3 ceramics by grain-size effect, electric field and heat treatment10.1016/j.actamat.2023.118778 ↗
23. On the coexistence of ferroelectric and antiferroelectric polymorphs in NaNbO3 fibers at room temperature10.1039/D2TC04039E ↗
24. Microscopic mechanism of ferroelectric properties in barium hexaferrites10.1016/j.jallcom.2022.167433 ↗
25. Fabrication of LiCoO2 cathode powder for thin film battery by aerosol flame deposition10.1016/j.jpowsour.2007.06.136 ↗
26. Development of biomimetic needle-like apatite nanocrystals by a simple new method
27. Magnetic ordering in La1-xSrxMnO3-x/2 anion-deficient manganites10.1134/1.1826167 ↗
28. Activation of Co-O bond in (110) facet exposed Co3O4 by Cu doping for the boost of propane catalytic oxidation10.1016/j.jhazmat.2023.131319 ↗
29. Photocatalytic methane activation by dual reaction sites co-modified WO310.1016/S1872-2067(22)64169-X ↗
30. Manipulating oxygen vacancies to spur ion kinetics in V2O5 structures for superior aqueous zinc-ion batteries10.1002/adfm.202305659 ↗
31. Tuning oxygen vacancies in Bi4Ti3O12 nanosheets to boost piezo-photocatalytic activity10.1016/j.nanoen.2023.108202 ↗
32. A (Bi2O2)2+ layer as a significant carrier generator and transmission channel in CaBi2Nb2O9 platelets for enhanced piezo-photo-catalytic performance10.1016/j.nanoen.2023.108252 ↗
33. Increasing solar absorption for photocatalysis with black hydrogenated titanium dioxide nanocrystals10.1126/science.1200448 ↗
34. Noble-metal-free photocatalytic hydrogen evolution activity: the impact of ball milling anatase nanopowders with TiH2
35. Cation ordering and magnetic properties of neodymium-barium manganites10.1134/S106378420801009X ↗
36. Oxygen-vacancy-enhanced piezo-photocatalytic performance of AgNbO310.1016/j.scriptamat.2021.114234 ↗
37. High piezo-catalytic activity of ZnO/Al2O3 nanosheets utilizing ultrasonic energy for wastewater treatment10.1016/j.jclepro.2019.118532 ↗
38. Enhanced piezocatalytic activity of Sr0.5Ba0.5Nb2O6 nanostructures by engineering surface oxygen vacancies and self-generated heterojunctions10.1021/acsami.0c21202 ↗
39. Insight into the effect of OH modification on the piezo-photocatalytic hydrogen production activity of SrTiO310.1016/j.jcis.2021.10.170 ↗
40. Efficient piezocatalytic H2O2 production of atomic-level thickness Bi4Ti3O12 nanosheets with surface oxygen vacancy
41. Signally enhanced piezo-photocatalysis of Bi0.5Na0.5TiO3/MWCNTs composite for degradation of rhodamine B10.1016/j.chemosphere.2022.136596 ↗
42. Hollow-structured BaTiO3 nanoparticles with cerium-regulated defect engineering to promote piezocatalytic antibacterial treatment10.1016/j.apcatb.2023.122520 ↗
43. Impact of oxygen vacancy on piezo-photocatalytic catalytic activity of barium titanate10.1016/j.apsusc.2023.156794 ↗
44. Oxygen vacancies in piezoelectric ZnO twin-mesocrystal to improve peroxymonosulfate utilization efficiency via piezo-activation for antibiotic ornidazole removal10.1002/adma.202209885 ↗
45. Oxygen vacancy engineering of zinc oxide for boosting piezo-electrocatalytic hydrogen evolution10.1016/j.apsusc.2023.156556 ↗
46. Vibration catalysis of eco-friendly Na0.5K0.5NbO3-based piezoelectric: an efficient phase boundary catalyst10.1016/j.apcatb.2020.119353 ↗
47. Superior photo-piezoelectric catalytic performance using Bi0.5Na0.5TiO3@BiVO4 based cloth10.1039/D1TA05315A ↗
48. Enhanced piezoelectric-induced catalysis of SrTiO3 nanocrystal with well-defined facets under ultrasonic vibration10.1016/j.ultsonch.2019.104819 ↗
49. Enhanced piezoelectric catalytic properties of NaNbO3 powder by defects engineering10.1016/j.apsusc.2023.157363 ↗
50. Low-content barium doping induces two-phase coexistence in NaNbO3 to enhance the piezo-photocatalytic activity10.1016/j.ceramint.2022.08.257 ↗
51. Modulating polarization rotation to stimulate the high piezocatalytic activity of (K, Na)NbO3 lead-free piezoelectric materials10.1016/j.apcatb.2022.121471 ↗
52. Piezoelectric materials for synergistic piezo- and radio-catalytic tumor therapy10.1016/j.nantod.2022.101510 ↗
53. Diffused phase transition boosted dye degradation with Ba(ZrxTi1-x)O3 solid solutions through piezoelectric effect10.1016/j.nanoen.2021.106474 ↗
54. Piezo-photocatalytic flexible PAN/TiO2 composite nanofibers for environmental remediation10.1016/j.scitotenv.2022.153790 ↗
55. A novel strategy for excellent piezocatalytic activity in lead-free BaTiO3-based materials via manipulating the multiphase coexistence10.1021/acsami.2c14322 ↗
56. Piezoelectric polarization modulated novel Bi2WO6/g-C3N4/ZnO Z-scheme heterojunctions with g-C3N4 intermediate layer for efficient piezo-photocatalytic decomposition of harmful organic pollutants10.1016/j.jcis.2021.09.007 ↗
57. Effect of Bi2WO6 nanosheets on the ultrasonic degradation of organic dyes: roles of adsorption and piezocatalysis10.1016/j.jclepro.2020.121125 ↗
58. Piezoelectric BaTiO3 with the milling treatment for highly efficient piezocatalysis under vibration10.1016/j.jallcom.2022.164234 ↗
59. Enhancement of piezoelectric catalysis of Na0.5Bi0.5TiO3 with electric poling for dye decomposition10.1016/j.ceramint.2021.10.151 ↗
60. Strong piezocatalysis in barium titanate/carbon hybrid nanocomposites for dye wastewater decomposition10.1016/j.jcis.2020.10.145 ↗
61. Ultrahigh piezocatalytic capability in eco-friendly BaTiO3 nanosheets promoted by 2D morphology engineering10.1016/j.jcis.2021.03.040 ↗
62. Effect of oxygen vacancies and crystal symmetry on piezocatalytic properties of Bi2WO6 ferroelectric nanosheets for wastewater decontamination10.1039/D1EN00022E ↗
63. Synergetic effect of piezoelectricity and Ag deposition on photocatalytic performance of barium titanate perovskite10.1016/j.solener.2021.06.032 ↗
64. A new strategy for large-scale synthesis of Na0.5Bi0.5TiO3 nanowires and their application in piezocatalytic degradation10.1039/D1NA00024A ↗
65. Integrated piezo-photocatalysis of electrospun Bi4Ti3O12 nanostructures by bi-harvesting visible light and ultrasonic energies10.1016/j.ceramint.2020.11.112 ↗