Effect of laser-assisted irradiation on plasma electrolytic oxidation of titanium alloys: Arc spot evolution characteristics and photoelectric synergistic mechanisms
Source abstract
Abstract
Laser irradiation can be employed as an auxiliary energy field to optimize functional plasma electrolytic oxidation (PEO) coatings. Herein, the mechanism of the effect of laser-assisted irradiation on the morphology and composition of ceramic coatings prepared by PEO of titanium alloys in electrolytes with sodium tetraborate-based is discussed from the perspective of plasma arc spot evolution and photoelectric synergistic effect. X-ray diffraction (XRD), transmission electron microscopy (TEM), Mott-Schottky (M-S), scanning electron microscopy (SEM), and atomic force microscopy (AFM) were used to analyze the coating characteristics. The results showed that laser-assisted irradiation promoted the oxidation of the coatings, accelerated the conversion of the anatase phase to the rutile phase, reduced the oxygen vacancy defects and formed the "ant nest" porous microstructure. Monitoring of the voltage, electric field, and plasma discharge arc spot indicated that laser-assisted irradiation restricted the electric field diffusion on the anode surface, reduced the termination voltage, and significantly increased the intensity (maximum discharge percentage increased from 14.238 % to 20.358 %) and uniformity of distribution of the plasma discharge. Instantaneous photoresponse curves and electrochemical impedance spectroscopy confirmed that the PEO coatings exhibited fast and sustained photoelectric response under simultaneous laser irradiation, progressively enhanced with increasing laser irradiation energy. The photogenerated electrons excited by the semiconductor TiO 2 coating under the simultaneous irradiation of laser can be used as the initial carriers of the electron avalanche, which induces the generation of a plasma on the surface of the anode and thus enhances the plasma discharge behavior, which is the fundamental reason for the optimization of the coating characteristics.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Recent progress in surface modification of metals coated by plasma electrolytic oxidation: principle, structure, and performance10.1016/j.pmatsci.2020.100735 ↗
2. Single-step preparation of large area TiO2 photoelectrodes for water splitting10.1002/aenm.202000652 ↗
3. Effects of anodic voltages on microstructure and properties of plasma electrolytic oxidation coatings on biomedical NiTi alloy10.1016/j.jmst.2012.11.009 ↗
4. In-situ LDHs growth on PEO coatings on AZ31 magnesium alloy for active protection: roles of PEO composition and conversion solution10.1016/j.jma.2021.09.001 ↗
5. Plasma electrolytic oxidation of the magnesium alloy MA8 in electrolytes containing TiN nanoparticles10.1016/j.jmst.2017.01.021 ↗
6. Preparation of white ZrO2 coating with low solar absorptance on aluminum alloy by plasma electrolytic oxidation10.1016/j.ceramint.2023.06.192 ↗
7. Optimization of the microstructure of TiO2 photocatalytic surfaces created by plasma electrolytic oxidation of titanium substrates10.1016/j.surfcoat.2021.127000 ↗
8. Mg-Fe LDH sealed PEO coating on magnesium for biodegradation control, antibacteria and osteogenesis10.1016/j.jmst.2021.05.088 ↗
9. Review of micro-arc oxidation of titanium alloys: mechanism, properties and applications10.1016/j.jallcom.2023.169773 ↗
10. Effect of laser texturing on the antiwear properties of micro-arc oxidation coating formed on Ti-6Al-4V10.1016/j.surfcoat.2022.129114 ↗
11. Effect of laser surface remelting pretreatment with different energy density on MAO bioceramic coating10.1016/j.surfcoat.2020.125815 ↗
12. The influence of phase gradient within the micro arc oxidation (MAO) coatings on mechanical and tribological behaviors10.1016/j.surfcoat.2015.02.047 ↗
13. Antibacterial activity of bioceramic coatings on Mg and its alloys created by plasma electrolytic oxidation (PEO): a review10.1016/j.jma.2021.05.020 ↗
14. A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals10.1080/09506608.2018.1466492 ↗
15. Microstructure and corrosion resistance of ultrasonic micro-arc oxidation biocoatings on magnesium alloy10.1007/s40145-013-0064-y ↗
16. Construction of multi-layered Zn-modified TiO2 coating by ultrasound-auxiliary micro-arc oxidation: microstructure and biological property
17. Effect of ultrasonic on microstructure and growth characteristics of micro-arc oxidation ceramic coatings on 6061 aluminum alloy10.1016/j.vacuum.2013.05.022 ↗
18. Enhanced uniformity, corrosion resistance and biological performance of Cu-incorporated TiO2 coating produced by ultrasound-auxiliary micro-arc oxidation10.1016/j.apsusc.2021.150932 ↗
19. Mechanism of microarc oxidation treated Ti6Al4V alloy in a magnetic field10.1007/s11661-021-06555-4 ↗
20. Photoactive TiO2 ceramic coatings obtained by laser-assisted plasma electrolytic oxidation on commercial pure titanium10.1016/j.ceramint.2023.11.346 ↗
21. Effect of auxiliary laser irradiation on characteristics and properties of micro-arc oxidation coating on Ti6Al4V alloy10.1016/j.ceramint.2024.03.045 ↗
22. Laser-controlled chemical etching of aluminum10.1063/1.94285 ↗
23. Thermal effects in laser assisted jet electrochemical machining10.1016/j.cirp.2011.03.132 ↗
24. A tool-based hybrid laser-electrochemical micromachining process: Experimental investigations and synergistic effects10.1016/j.ijmachtools.2020.103569 ↗
25. Laser enhanced electroplating and maskless pattern generation10.1063/1.91242 ↗
26. Experiment study of laser thermal enhanced electrochemical deposition10.1007/s00542-015-2759-1 ↗
27. Experimental and numerical investigation of laser-assisted electrodeposition based on amorphous forming: laser-electrodeposition correlation and explanation of enhancing mechanism10.1016/j.jmapro.2022.10.055 ↗
28. Functional coatings formed on the titanium and magnesium alloys as implant materials by plasma electrolytic oxidation technology: fundamental principles and synthesis conditions10.1515/corrrev-2015-0069 ↗
29. Plasma electrolytic oxidation of magnesium and its alloys: mechanism, properties and applications10.1016/j.jma.2017.02.004 ↗
30. Thick oxide coatings formed by spark anodizing of Mg-Al alloy in alkaline phosphate-silicate electrolytes10.1016/j.jallcom.2017.03.210 ↗
31. Growth pattern of soft-spark micro-arc oxide coating on titanium alloy in silicon anion electrolyte10.1016/j.surfcoat.2023.130030 ↗
32. Review of the soft sparking issues in plasma electrolytic oxidation10.3390/met8020105 ↗
33. An investigation of ceramic coating growth mechanisms in plasma electrolytic oxidation (PEO) processing10.1016/j.electacta.2013.08.137 ↗
34. Control of the physical properties of anodic coatings obtained by plasma electrolytic oxidation on Ti6Al4V alloy10.1016/j.surfcoat.2015.10.052 ↗
35. Characterization of the plasma electrolytic oxidation of titanium in sodium metasilicate10.1016/j.apsusc.2012.10.183 ↗
36. Characterization and cytocompatibility of hierarchical porous TiO2 coatings incorporated with calcium and strontium by one-step micro-arc oxidation
37. Osteoconductive element-doped, porous, and low-elastic-modulus duplex coatings on a Ti-6Al-4 V alloy: a hybrid coating system for accelerating cell growth10.1016/j.jallcom.2023.169131 ↗
38. Growth characteristics of scanning micro-arc oxidation coating on Ti6Al4V alloy10.1080/02670844.2023.2207930 ↗
39. In-situ formation of textured TiN coatings on biomedical titanium alloy by laser irradiation10.1016/j.jmbbm.2017.11.019 ↗
40. In-situ investigation of the semiconductive properties and protective role of Cu2O layer formed on copper in a borate buffer solution10.1016/j.jelechem.2017.12.028 ↗
41. Passivity of 316L stainless steel in borate buffer solution studied by Mott–Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy10.1016/j.corsci.2010.07.013 ↗
42. Plasma electrolytic oxidation of copper in an aluminate based electrolyte with the respective additives of Na3PO4, NaH2PO4 and NaH2PO210.1016/j.apsusc.2021.150477 ↗
43. Electrochemical behaviour of titanium in KOH at high potential10.1016/j.electacta.2015.11.027 ↗
44. Evolution process of the plasma electrolytic oxidation (PEO) coating formed on aluminum in an alkaline sodium hexametaphosphate ((NaPO3)6) electrolyte10.1016/j.jallcom.2019.05.253 ↗
45. Characterisation of titanium passivation films by in situ ac impedance measurements and XPS analysis10.1016/0022-0728(94)87136-1 ↗
46. The influence of pulse timing and current mode on the microstructure and corrosion behaviour of a plasma electrolytic oxidation (PEO) coated AM60B magnesium alloy10.1016/j.jallcom.2012.07.003 ↗
47. Investigation of the formation mechanisms of plasma electrolytic oxidation coatings on Mg alloy AM50 using particles10.1016/j.electacta.2016.03.042 ↗
48. Review of plasma electrolytic oxidation of titanium substrates: mechanism, properties, applications and limitations10.1016/j.apsadv.2021.100121 ↗
49. Correlation between plasma electrolytic oxidation treatment stages and coating microstructure on aluminum under unipolar pulsed DC mode10.1016/j.surfcoat.2014.11.007 ↗
50. Growth regularity of ceramic coating on magnesium alloy by plasma electrolytic oxidation10.1016/j.jallcom.2008.01.069 ↗
51. Influence of process parameters on growth behaviour and properties of coatings obtained by plasma electrolytic oxidation (PEO) on AA 606110.1007/s10800-018-1186-2 ↗
52. Effect of surface finish on the colour anodising of Ti-6Al-4V at various voltages10.1080/00202967.2022.2111121 ↗
53. Superhydrophobic surfaces and coatings by electrochemical anodic oxidation and plasma electrolytic oxidation10.1016/j.cis.2020.102245 ↗
54. Recent advances in electrochemically surface treated titanium and its alloys for biomedical applications: a review of anodic and plasma electrolytic oxidation methods
55. Production of N-doped anatase TiO2 on TiN-coated Ti substrates by plasma electrolytic oxidation for visible-light photocatalysts10.1016/j.ceramint.2019.07.275 ↗
56. The effects of anion deposition and negative pulse on the behaviours of plasma electrolytic oxidation (PEO)—A systematic study of the PEO of a Zirlo alloy in aluminate electrolytes10.1016/j.electacta.2016.12.115 ↗
57. A mechanism for the growth of a plasma electrolytic oxide coating on Al10.1016/j.electacta.2016.04.186 ↗
58. Experimental evaluation of some electrolytic breakdown hypotheses10.1016/0013-4686(71)85169-1 ↗
59. Dielectric breakdown of anodic oxide films on valve metals10.1016/S0010-938X(67)80109-4 ↗
60. Space charge in formation of anodic oxide films10.1016/0001-6160(56)90123-7 ↗
61. Mechanisms underlying degradation pathways of microcystin-LR with doped TiO2 photocatalysis10.1016/j.cej.2017.07.161 ↗
62. Post-breakdown anodization of aluminium10.1016/0013-4686(77)87011-4 ↗
63. Theory of electrical breakdown during formation of barrier anodic films10.1016/0013-4686(77)80042-X ↗