Preparation and properties of anode material LSCM for SOFC
Source abstract
Abstract
La 0.75Sr 0.25Co xMn 1-xO 3-δ (x=0.3–0.7)(LSCM) was synthesized by sol-gel method as a potential anode material for solid oxide fuel cell (SOFCs). The results showed that it was helpful to form the LSCM perovskite phase by adjusting the pH value of precursor fluid, and the LSCM has good morphological characteristics according to processing conditions. Single-phase perovskite space group R-3c(167) rhombohedral crystal structure was obtained by calcining LSCM xerogel at 1000 °C for 3 hours. The related volume change phase transition is only about 1%. By comparison, it is found that La 0.75Sr 0.25Co 0.5Mn 0.5O 3-δ (LSCM05) has relatively high conductivity, the maximum ionic conductivity is 5.25 S·cm −1 at 800 °C, the activation energy is 0.83 eV, and the peak power density of the assembled single cell is 0.36 W·cm −2 , which is expected to be used as electrode material for IT-SOFCs. In addition, the density of states and energy band structure of LSCM is simulated and calculated through density functional theory (DFT), and it is successfully verified that its component LSCM05 has relatively high conductivity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Study on La0.75Sr0.25Cr0.5Mn0.5O3-δ-Ce0.8Gd0.2O1.9 composite electrode as anode of LaGaO3-based direct carbon solid oxide fuel cell10.1007/s11771-022-5045-2 ↗
2. Electrochemical performance of La0.7Sr0.3Fe0.9Ni0.1O3-δ symmetric electrode for solid oxide fuel cell
3. Double perovskite material as anode for solid oxide fuel cells
4. Chromium poisoning and degradation at LaNi0.6Fe0.4O3 cathode with LaNi0.6Fe0.4O3-Gd0.2Ce0.8O2 functional layer for SOFC under open circuit condition10.1007/s10008-018-3923-1 ↗
5. Co-free triple perovskite La1.5Ba1.5Cu3O7±δ as a promotion air electrical material for solid oxide fuel cells.10.1016/j.jpowsour.2022.231371 ↗
6. Performance of La0.5Sr1.5MnO4±δ ruddlesden-popper manganite as electrical material for symmetrical solid oxide fuel cells10.1016/j.electacta.2019.03.037 ↗
7. The performance of La0.6Sr1.4MnO4 layered perovskite electronic material for intermediate temperature symmetrical solid oxide fuel cells10.1016/j.jpowsour.2014.06.163 ↗
8. Layered oxygen-deficient double perovskite GdBaFe2O5+δ as electrical material for symmetrical solid-oxide fuel cells10.1016/j.electacta.2021.137807 ↗
9. Performance of double perovskite symmetrical electronic materials Sr2TiFe1–xMoxO6–δ(x=0.1,0.2) for solid oxide fuel cells10.1016/j.electacta.2018.01.062 ↗
10. Properties of A-site nonstoichiometry (Pr0.4)xSr0.6Co0.2Fe0.7Nb0.1O3−σ(0.9≤x≤1.1) as symmetrical electronic material for solid oxide fuel cells10.1016/j.jpowsour.2013.09.077 ↗
11. Further optimization of the properties of Pr0.6Sr0.4Fe0.9W0.1O3-δ by Cu-doping as symmetric elections for solid oxide fuel cells10.1016/j.jallcom.2022.167685 ↗
12. A composite sol-gel process to prepare a YSZ electrolyte for solid oxide fuel cells10.1016/j.jpowsour.2012.01.109 ↗
13. Information of thermochemically stable apatite La10(SiO4)6O3 as electrolyte for solid oxide fuel cells10.1016/j.ceramint.2012.01.049 ↗
14. Composite electrodes for ceria-carbonate intermediate temperature electrolytes10.1016/j.electacta.2012.12.035 ↗
15. Preparation and characterization of ceria co-doped with Ca and Mg10.1016/j.ssi.2012.02.001 ↗
16. Synthesis and thermal behavior of La9.33Si2Ge4O26 apatite for SOFCs10.1016/j.jallcom.2011.11.091 ↗
17. Chemical synthesis and character of Ca-substituted YAlO3 as electrolyte for solid oxide fuel cells10.1016/j.jallcom.2010.02.095 ↗
18. Improved solid oxide fuel cell performance with nanostructured electrolytes10.1021/nn201354p ↗
19. Electronic performance and distribution of relaxation times analysis of tungsten stabilized La0.5Sr0.5Fe0.9W0.1O3-δ electronic for symmetric solid oxide fuel cells10.1016/j.ijhydene.2021.06.140 ↗
20. ANON.
21. Oxygen deficient ruddlesden popper type Lanthanum Strontium Cuprate doped with Bismuth as a cathode for Solid Oxide Fuel Cells10.1021/acsami.9b05445 ↗
22. XPS study of surface state of novel perovskite system Dy0.5Sr0.5Co0.8Fe0.2O3-δ as cathode for solid oxide fuel cells
23. Preparation and properties of Ce0.8Sm0.16Y0.03Gd0.01O1.9- Bain0.3Ti0.7O2.85 composite electrolyte10.3390/ma15165591 ↗
24. Preparation and Properties of Solid Electrolyte Ce0.8Sm0.16PrxGd0.04-xO1.9
25. Innovative solid oxide fuel cells based on BaIn0.3Ti0.7O2.85 electrolyte and La2Mo2O9 amorphous reduced phase as anode material10.1016/j.jpowsour.2015.10.030 ↗
26. Theoretical exploration of single-layer Tl2O as a catalyst in lithium-oxygen battery cathodes10.1021/acs.jpcc.9b09665 ↗
27. Hybrid density functional study of structural, bonding, and electronic properties of the manganite series La(1-x)CaxMnO3 (x = 0,1/4,1)10.1103/PhysRevB.89.205110 ↗
28. Unfolding B-O-B bonds for an enhanced ORR performance in ABO3-type perovskites