journal article·2024-04

Analyzing the composite heterostructure as an efficient electrolyte for low-temperature ceramic fuel cells

Junjiao Li, M.A.K. Yousaf Shah, Yuzheng Lu, Naveed Mushtaq, Muhammad Yousaf, Nabeela Akbar, Naila Arshad, Muhammad Sultan Irshad

Publisher page

Abstract

The hexagonal wurtzite structure (ZnO) is a well-known multifunctional semiconductor, and it is widely used as an electrolyte in energy applications such as fuel cells. ZnO, an n-type semiconductor, can be used as the electrolyte in fuel cells despite its insufficient open circuit voltage and negligible current density. After incorporating GDC to create a semiconductor ionic GDC/ZnO heterostructure, the ionic conductivity increased to 0.16 S/cm, and the fuel cell performance improved to 802 mW/cm 2 at 520 °C. It has been discovered that the heterostructure`s energy band bending and built-in electric field play a crucial role in the ionic transport and inhibiting the electronic conduction of GDC/ZnO, resulting in a notable material ionic property and fuel cell performance. Also, relaxation time distribution analysis revealed that interfacial conduction plays a significant role in the ionic conduction of GDC/ZnO . These results indicate that ZnO, which has a wide bandgap, may be tailored to an ionic conducting electrolyte for fuel cell applications using a heterostructure approach and energy band alignment method.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
2. Advanced low-temperature solid oxide fuel cells based on a built-in electric field
3. A brief review on ceria based solid electrolytes for solid oxide fuel cells10.1016/j.jallcom.2018.12.015 ↗
4. Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells10.1016/j.pmatsci.2011.08.002 ↗
5. Advantages of intermediate temperature solid oxide fuel cells for tractionary applications10.1016/S0378-7753(00)00564-4 ↗
6. Comparative study of different fuel cell technologies10.1016/j.rser.2011.09.020 ↗
7. Environmental impact of fuel cell technology10.1021/cr00033a007 ↗
8. Comparison of solid oxide fuel cell (SOFC) electrolyte materials for operation at 500C10.1016/j.ssi.2019.115138 ↗
9. Direct ammonia low-temperature symmetrical solid oxide fuel cells with composite semiconductor electrolyte10.1016/j.elecom.2022.107216 ↗
10. Study of CuNiZnGdCe-nanocomposite anode for low temperature SOFC10.1166/nnl.2012.1306 ↗
11. Advanced fuel cell based on new nanocrystalline structure Gd0. 1Ce0. 9O2 electrolyte10.1021/acsami.8b20454 ↗
12. Designing Gadolinium-doped ceria electrolyte for low temperature electrochemical energy conversion10.1016/j.ijhydene.2022.12.314 ↗
13. Surface and interfacial conduction using gadolinium-doped ceria electrolyte for advanced low temperature 400-500° C fuel cell
14. Semiconductor electrolyte for low-operating-temperature solid oxide fuel cell: Li-doped ZnO10.1016/j.ijhydene.2018.04.121 ↗
15. ZnO/MgZnO Heterostruct. Membr. Type II Band
16. Application of a triple-conducting heterostructure electrolyte of Ba0. 5Sr0. 5Co0. 1Fe0. 7Zr0. 1Y0. 1O3− δ and Ca0. 04Ce0. 80Sm0. 16O2− δ in a high-performance low-temperature solid oxide fuel cell10.1021/acsami.0c10061 ↗
17. Advanced fuel cell based on semiconductor perovskite La–BaZrYO3-δ as an electrolyte material operating at low temperature 550° C10.1016/j.ijhydene.2020.07.011 ↗
18. Demonstrating the potential of iron-doped strontium titanate electrolyte with high-performance for low temperature ceramic fuel cells10.1016/j.renene.2022.06.154 ↗
19. Design principle and assessing the correlations in Sb-doped Ba0. 5Sr0. 5FeO3–δ perovskite oxide for enhanced oxygen reduction catalytic performance10.1016/j.jcat.2020.12.005 ↗
20. Doped ceria electrolyte rich in oxygen vacancies for boosting the fuel cell performance of LT-CFCs
21. Unraveling the synergistic effect on ionic transport of ceria via the surface engineering for low-temperature ceramic fuel cells10.1063/5.0137303 ↗
22. Surface engineered homo-structure enabling the fast ionic conduction for ceramic fuel cells10.1016/j.jallcom.2023.169360 ↗
23. Semiconductor-membrane fuel cell (SMFC) for renewable energy technology10.1016/j.rser.2023.113639 ↗
24. Shaping triple-conducting semiconductor BaCo0. 4Fe0. 4Zr0. 1Y0. 1O3-δ into an electrolyte for low-temperature solid oxide fuel cells10.1038/s41467-019-09532-z ↗
25. The semiconductor SrFe0. 2Ti0. 8O3-δ-ZnO heterostructure electrolyte fuel cells10.1016/j.ijhydene.2019.09.145 ↗
26. Cubic silicon carbide/zinc oxide heterostructure fuel cells10.1063/5.0021460 ↗
27. Built-in Electric Field for Efficient Charge Separation and Ionic Transport in LiCoO2/SnO2 Semiconductor Junction Fuel Cells10.1021/acsaem.2c02152 ↗
28. Highly efficient sodium storage in iron oxide nanotube arrays enabled by built‐in electric field10.1002/adma.201902603 ↗
29. Heteroatomic interface engineering in MOF-derived carbon heterostructures with built-in electric-field effects for high performance Al-ion batteries10.1039/C8EE01046C ↗
30. Advanced fuel cell based on perovskite La–SrTiO3 semiconductor as the electrolyte with superoxide-ion conduction10.1021/acsami.8b10087 ↗
31. Designing High Interfacial Conduction beyond Bulk via Engineering the Semiconductor–Ionic Heterostructure CeO2− δ/BaZr0. 8Y0. 2O3 for Superior Proton Conductive Fuel Cell and Water Electrolysis Applications10.1021/acsaem.2c02995 ↗
32. Developing cuprospinel CuFe2O4–ZnO semiconductor heterostructure as a proton conducting electrolyte for advanced fuel cells10.1016/j.ijhydene.2020.04.198 ↗
33. Fast ionic conduction in semiconductor CeO2-δ electrolyte fuel cells, NPG Asia
34. Functional semiconductor–ionic composite GDC–KZnAl/LiNiCuZnO x for single-component fuel cell10.1039/c3ra47783e ↗
35. Junction and energy band on novel semiconductor-based fuel cells10.1016/j.isci.2021.102191 ↗
36. Toward next-generation fuel cell materials10.1016/j.isci.2023.106869 ↗
37. Gadolinia-doped ceria mixed with alkali carbonates for solid oxide fuel cell applications: I. A thermal, structural and morphological insight10.1016/j.jpowsour.2011.02.004 ↗
38. Effect of CuO/ZnO/FTO electrode properties on the performance of a photo-microbial fuel cell sensor for the detection of heavy metals10.1016/j.chemosphere.2022.134779 ↗
39. High-performing and stable non-doped ceria electrolyte with amorphous carbonate coating layer for low-temperature solid oxide fuel cells10.1016/j.electacta.2021.139067 ↗
40. Interface engineering of bi-layer semiconductor SrCoSnO3-δ-CeO2-δ heterojunction electrolyte for boosting the electrochemical performance of low-temperature ceramic fuel cell10.1016/j.ijhydene.2021.07.204 ↗
41. Electrochemical Properties of a Dual-Ion Semiconductor-Ionic Co0. 2Zn0. 8O-Sm0. 20Ce0. 80O2− δ Composite for a High-Performance Low-Temperature Solid Oxide Fuel Cell10.1021/acsaem.0c02095 ↗
42. Schottky junction effect on high performance fuel cells based on nanocomposite materials, Advanced Energy
43. Atomic interface engineering and electric‐field effect in ultrathin Bi2MoO6 nanosheets for superior lithium ion storage10.1002/adma.201700396 ↗
44. Colossal ionic conductivity at interfaces of epitaxial ZrO2: Y2O3/SrTiO3 heterostructures10.1126/science.1156393 ↗
45. Microstructural studies on degradation of interface between LSM–YSZ cathode and YSZ electrolyte in SOFCs10.1016/j.ssi.2009.07.011 ↗
46. Layer-structured LiNi0. 8Co0. 2O2: a new triple (H+/O2−/e−) conducting cathode for low temperature proton conducting solid oxide fuel cells10.1016/j.jpowsour.2015.12.015 ↗
47. Investigation of layered Ni0. 8Co0. 15Al0. 05LiO2 in electrode for low-temperature solid oxide fuel cells10.1016/j.ijhydene.2017.11.056 ↗
48. Electrochemical characterization of Ni/ScYSZ electrodes as SOFC anodes10.1149/2.045404jes ↗
49. Enhancement of Ni–(Y 2 O 3) 0.08 (ZrO 2) 0.92 fuel electrode performance by infiltration of Ce 0.8 Gd 0.2 O 2− δ nanoparticles10.1039/C9TA12316D ↗
50. , Electrochemical impedance analysis of SOFC with transmission line model using distribution of relaxation times (DRT)10.1149/1945-7111/aba00f ↗
51. Performance and DRT analysis of P-SOFCs fabricated using new phase inversion combined tape casting technology10.1039/C7TA04967F ↗
52. Exceptionally High Proton Conductivity in Eu2O3 by Proton-coupled Electron Transfer Mechanism
53. Esaki diodes in van der Waals heterojunctions with broken-gap energy band alignment10.1021/acs.nanolett.5b01792 ↗
54. UV-enhanced ozone gas sensing response of ZnO-SnO2 heterojunctions at room temperature10.1016/j.snb.2016.08.158 ↗
55. A-site deficient semiconductor electrolyte Sr 1− x Co x FeO 3− δ for low-temperature (450–550° C) solid oxide fuel cells10.1039/D2RA03823D ↗
56. Densification behavior and space charge blocking effect of Bi2O3 and Gd2O3 co-doped CeO2 as electrolyte for solid oxide fuel cells10.1016/j.electacta.2015.02.090 ↗
57. Synthesis and evaluation of (La0. 6Sr0. 4)(Co0. 2Fe0. 8) O3 (LSCF)–Y0. 08Zr0. 92O1. 96 (YSZ)–Gd0. 1Ce0. 9O2− δ (GDC) dual composite SOFC cathodes for high performance and durability10.1016/j.ijhydene.2012.08.099 ↗
58. Processing and characterization of ultra-thin yttria-stabilized zirconia (YSZ) electrolytic films for SOFC10.1016/j.ssi.2005.10.010 ↗
59. An evaluation of electrochemical performance of a solid oxide electrolyzer cell as a function of co-sintered YSZ-SDC bilayer electrolyte thickness10.1016/j.enconman.2017.08.048 ↗
60. Electrochemical performance of a Ni0. 8Co0. 15Al0. 05LiO2 cathode for a low temperature solid oxide fuel cell10.1016/j.ijhydene.2020.06.189 ↗
61. Investigation and improvement on the storage property of LiNi0. 8Co0. 2O2 as a cathode material for lithium-ion batteries10.1016/j.jpowsour.2006.07.028 ↗
62. Electrical properties of nanocube CeO2 in advanced solid oxide fuel cells10.1016/j.ijhydene.2018.05.120 ↗
63. Multi-level architecture optimization of MOF-templated Co-based nanoparticles embedded in hollow N-doped carbon polyhedra for efficient OER and ORR10.1021/acscatal.8b02504 ↗
64. The role of Ce doping in enhancing sensing performance of ZnO-based gas sensor by adjusting the proportion of oxygen species10.1016/j.snb.2018.05.167 ↗
65. Accelerated proton transport based on a pin heterostructure membrane for low-temperature solid oxide fuel cells10.1021/acsaem.1c02773 ↗
66. Temperature effect on crystallinity and chemical states of nickel hydroxide as alternative superior catalyst for urea electrooxidation10.1016/j.electacta.2019.01.150 ↗
67. The (001) 3C SiC surface termination and band structure after common wet chemical etching procedures, stated by XPS, LEED, and HREELS10.1016/j.apsusc.2017.08.220 ↗