journal article·2023-08

Electrochemical anisotropy of Hastelloy X fabricated by selective laser melting in a NaNO3 solution

Shaoli Zhang, Youmin Shi, Yaping Zhang, Pengfei Guo, Xiangyang Li, Kai Luo

Publisher page

Abstract

The microstructure and electrochemical behavior of Hastelloy X fabricated by selective laser melting were investigated. The microstructure of selective laser melted Hastelloy X mainly comprises columnar crystals grown along the deposition direction, consisting of fine columnar dendrites. The results of the electrochemical tests conducted using a 10 wt% NaNO 3 solution show that the passive film that formed on the horizontal section (HS) and vertical section (VS) presented p-type semiconductor properties, but the stability and protectiveness of the passive film that formed on the VS was better than those of that on the HS. The surface morphology after dissolution indicates that the dissolution rate of the interdendritic region was faster than that of the dendritic trunk, which resulted in a faster dissolution rate for the center of the molten pool than that of the edge of the molten pool, and the dissolution rate of the HS was faster than that of the VS.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Laser powder bed fusion of Hastelloy X: effects of hot isostatic pressing and the hot cracking mechanism10.1016/j.msea.2018.07.008 ↗
2. Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting)10.1016/j.matdes.2019.107598 ↗
3. Anisotropic response in mechanical and corrosion properties of Hastelloy X fabricated by selective laser melting10.1016/j.conbuildmat.2019.06.132 ↗
4. Review of selective laser melting: materials and applications10.1063/1.4935926 ↗
5. Controlling the microstructure of Hastelloy-X components manufactured by selective laser melting
6. Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting10.1016/j.msea.2016.04.086 ↗
7. On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing
8. Oxide and spatter powder formation during laser powder bed fusion of Hastelloy X10.1016/j.powtec.2019.06.004 ↗
9. Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting
10. Effect of cutting conditions on surface roughness in finish turning Hastelloy X superalloy
11. Machining induced surface integrity in titanium and nickel alloys: a review10.1016/j.ijmachtools.2010.11.003 ↗
12. A high efficiency electrochemical machining method of blisk channels10.1016/j.cirp.2013.03.068 ↗
13. A review on material removal mechanism in electrochemical discharge machining (ECDM) and possibilities to enhance the material removal rate10.1016/j.precisioneng.2016.01.007 ↗
14. Electrochemical machining of complex components of aero-engines: Developments, trends, and technological advances10.1016/j.cja.2019.09.016 ↗
15. Effects of polarization on machining accuracy in pulse electrochemical machining10.1016/j.procir.2017.12.080 ↗
16. Improvement of trailing edge accuracy in blisk electrochemical machining by optimizing the electric field with an extended cathode10.1016/j.jmatprotec.2015.12.025 ↗
17. Electrochemical dissolution behavior of the nickel-based cast superalloy K423A in NaNO3 solution10.1016/j.electacta.2017.09.046 ↗
18. Columnar structure and electrochemical anisotropy of a nickel-based superalloy fabricated via laser solid forming10.1007/s10800-017-1096-8 ↗
19. Electrochemical removal of different phases from laser solid formed inconel 71810.1149/2.0951707jes ↗
20. Electrochemical behavior of Inconel 718 fabricated by laser solid forming on different sections10.1016/j.corsci.2017.12.021 ↗
21. Microstructure and electrochemical anodic behavior of Inconel 718 fabricated by high-power laser solid forming10.1016/j.electacta.2018.04.186 ↗
22. Effect of microstructure on the passive behavior of selective laser melting-fabricated Hastelloy X in NaNO3 solution10.1016/j.matchar.2020.110370 ↗
23. Microstructure and anodic electrochemical behavior of additive manufactured Hastelloy X alloy via directed energy deposition
24. Microstructural and texture development in direct laser fabricated IN71810.1016/j.matchar.2013.12.012 ↗
25. Dendrite growth at the limit of stability: tip radius and spacing10.1016/0001-6160(81)90082-1 ↗
26. A comparative study of primary and secondary passive films formed on AM355 stainless steel in 0.1M NaOH10.1016/j.apsusc.2017.08.151 ↗
27. The transpassive dissolution mechanism of 316L stainless steel10.1016/j.electacta.2009.01.040 ↗
28. Investigation of the electrochemical dissolution behavior of Inconel 718 and 304 stainless steel at low current density in NaNO3 solution10.1016/j.electacta.2014.12.155 ↗
29. Anodic dissolution behaviour and surface texture development of cobalt under electrochemical machining conditions10.1016/j.electacta.2013.05.070 ↗
30. Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting10.1016/j.corsci.2018.09.010 ↗
31. A point defect model for anodic passive films10.1149/1.2127591 ↗
32. Passive film on 2205 duplex stainless steel studied by photo-electrochemistry and ARXPS methods10.1016/j.corsci.2018.10.020 ↗
33. Electrochemical corrosion behavior of bulk ultra-fine grained Fe-Ni-Cr alloy10.1016/S1003-6326(14)63280-5 ↗
34. Passivity of 316L stainless steel in borate buffer solution studied by Mott–Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy10.1016/j.corsci.2010.07.013 ↗
35. Nature of the passive film on nickel10.1016/S0013-4686(02)00552-2 ↗
36. Mott‐Schottky plot of the passive film formed on iron in neutral borate and phosphate solutions10.1149/1.2100672 ↗
37. Influence of formation conditions on impedance properties of nickel passive layers formed in 1 M KOH10.1016/0013-4686(96)00135-1 ↗
38. A mixed-conduction model for oxide films on Fe, Cr and Fe–Cr alloys in high-temperature aqueous electrolytes––I. Comparison of the electrochemical behaviour at room temperature and at 200 °C10.1016/S0010-938X(02)00008-2 ↗
39. Effects of solution temperature on the kinetic nature of passive film on Ni10.1016/j.electacta.2010.09.077 ↗
40. Standard electrode potentials of the elements as a fundamental periodic property of atomic number10.1016/j.electacta.2007.03.022 ↗
41. Crystallographic orientation and electrochemical activity of AZ31 Mg alloy10.1016/j.elecom.2010.05.011 ↗