journal article·2024-09

(1-x)Ni0.9Mn2.1O4-xLaCr0.6Mn0.4O3 composite ceramic with controllable electrical properties for low resistance NTC thermistors

Huwei Xiao, Chang Liu, Tianyang Zheng, Yunfei Liu, Yinong Lyu

Publisher page

Abstract

A series of NTC composite ceramics based on (1- x)Ni 0.9Mn 2.1O 4- xLaCr 0.6Mn 0.4O 3 ( x = 0.2, 0.25, 0.3, 0.4, and 0.5) were prepared by the solid-state method. The composite ceramics are mainly composed of the orthogonal perovskite phase and the cubic spinel phase. The Ni ions are diffused into the perovskite phase, La and Cr ions are diffused into the spinel phase. The interdiffusion of ions in two phases leads to the structural change of the two phases in the composite ceramics. The conduction mechanism of composite ceramics is the coexistence of electron jumping and double exchange conduction. The resistivity ρ 25 and B values vary in the range of 17.4–1056 Ω cm and 2140–3600 K, respectively. Indicating that the electrical properties can be adjusted arbitrarily. In addition, increasing the content of perovskite can improve the stability of the material. The prepared NTC composite ceramic has good electrical properties and stability, so it has good application potential in the field of low resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrical and Thermal Properties of Materials · Ferroelectric and Piezoelectric Materials · Advanced Sensor Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Negative temperature coefficient resistance (NTCR) ceramic thermistors: an industrial perspective10.1111/j.1551-2916.2009.02990.x ↗
2. LaMnO3-Ni0.75Mn2.25O4 supported bilayer NTC thermistors10.1111/jace.12870 ↗
3. Enhanced conductivity and stability of Co0.98CuxMn2.02-xO4 ceramics with dual phases and twin structures10.26599/JAC.2023.9220783 ↗
4. CaMn0.05Zr0.95O3-NiMn2O4 composite ceramics with tunable electrical properties for high temperature NTC thermistors10.1016/j.ceramint.2022.07.289 ↗
5. Characterization of nickel manganite NTC thermistor films prepared by aerosol deposition at room temperature10.1016/j.jeurceramsoc.2017.09.005 ↗
6. Electrical properties and aging behavior of Na-doped Mn1.95Co0.21Ni0.84O4 NTC ceramics10.1016/j.ceramint.2020.06.218 ↗
7. Structure and electrical properties characterization of NiMn2O4 NTC ceramics10.1016/j.inoche.2021.108856 ↗
8. LaMn1-xTixO3-NiMn2O4 (0 ≤ x ≤ 0.7): a composite NTC ceramic with controllable electrical property and high stability10.1016/j.jeurceramsoc.2019.03.003 ↗
9. Electrical properties and stability of low temperature annealed (Zn, Cu) co-doped (Ni, Mn)3O4 spinel thin films10.1080/21870764.2021.1920157 ↗
10. Effect of Zn substitution on the phase, microstructure and electrical properties of Ni0.6Cu0.5ZnxMn1.9-xO4 (0 ≤ x ≤ 1) NTC ceramics10.1016/j.mseb.2014.06.011 ↗
11. Aging improvement in Cu-containing NTC ceramics prepared by co-precipitation method10.1016/j.jallcom.2013.08.014 ↗
12. Improvement of electrical properties of single-phase film thermistors by a Ni0.75Mn2.25O4/LaMnO3 bilayer structure
13. Preparation and characterization for LaMnO3 and 0.3LaMnO3-0.7Y2O3 high temperature bilayer structure NTC thermistors
14. Spark plasma sintering of MgAl2O4-LaCr0.5Mn0.5O3 composite thermistor ceramics and a comparison investigation with conventional sintering.10.1016/j.jallcom.2016.03.139 ↗
15. Studies on the structural, electrical and magnetic properties of LaCrO3, LaCr0.5Cu0.5O3 and LaCr0.5Fe0.5O3 by sol-gel method10.1016/j.materresbull.2012.04.068 ↗
16. LaCrO3-based anodes: stability considerations10.1016/S0378-7753(03)00099-5 ↗
17. Novel electrical properties of Mn-doped LaCrO3 ceramics as NTC thermistors10.1016/j.jallcom.2021.159269 ↗
18. Preparation and characterization of NiMn2O4 negative temperature coefficient ceramics by solid-state coordination reaction
19. Structural and electrical properties of NiMgxMn2-xO4 NTC thermistors prepared by using sol-gel derived powders10.1016/j.mseb.2011.01.020 ↗
20. Ion migration: a “Double-Edged Sword” for halide perovskite-based electronic devices
21. Valence-induced distortion controls the resistivity and thermal stability of Co2.77Mn1.71Fe1.10Zn0.42O8 ceramics10.1016/j.matdes.2020.108736 ↗
22. Direct measurement of electronic band structures at oxide grain boundaries10.1021/acs.nanolett.9b05298 ↗
23. Influence of lattice defects on the high pressure properties of Ni0.66Mn2.34O4 NTC ceramics10.1016/j.ceramint.2022.11.106 ↗
24. Nd1-xSrxMnO3 (x = 0.3): a perovskite manganite ceramic that exhibits PTC and NTC double properties10.1016/j.ceramint.2022.09.325 ↗
25. The effect of cation composition on the electrical properties and aging of Mn-Co-Ni thermistors10.1016/S0272-8842(99)00049-8 ↗
26. Ageing behaviour of electrical resistance in manganite NTC ceramics10.1016/S0955-2219(03)00377-7 ↗