Synthesis of La2NiO4 by the molten salt method and its infrared radiation properties
Source abstract
Abstract
The layered perovskite structure material La 2NiO 4, which is a material with better infrared radiation properties, was synthesized successfully at 950 ºC and above by the molten salt method. The emissivity values of La 2NiO 4 were all above 0.973 in the 3–5 µm waveband, which was due to the narrow band gap, and those in the 8–14 µm waveband were all above 0.987. The force constants of La 2NiO 4 were calculated, and it was proven that higher infrared emissivity in the 8–14 µm waveband corresponds to lower force constants. In addition, the high temperature chemical stability of La 2NiO 4 was studied and it was found that no chemical reactions occurred in La 2NiO 4at high temperature. The infrared emissivity of La 2NiO 4 treated at 1400 ºC was tested. The results showed that the maximum attenuation rate of infrared emissivity was less than 0.40%, indicating that La 2NiO 4 still had excellent infrared radiation properties after heat treatment.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Perovskite Materials and Applications · Optical properties and cooling technologies in crystalline materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Fabrication and characterization of Pr6O11-HfO2 ultra-high temperature infrared radiation coating10.1016/j.jeurceramsoc.2019.06.004 ↗
2. Infrared radiation performance and calculation of B-site doped lanthanum aluminate from first principles10.1016/j.ceramint.2018.03.219 ↗
3. Development of high infrared emissivity porous ceramic coating using pre-synthesized flower-like CeO2 powder for high temperature applications10.1016/j.ceramint.2021.09.218 ↗
4. Fabrication and performances of preceramic polymer-based high-temperature High emissivity coating10.1016/j.jeurceramsoc.2020.06.040 ↗
5. Preparation and investigation of MoSi2/SiC coating with high infrared emissivity at high temperature10.1016/j.surfcoat.2018.12.036 ↗
6. Effects of structure and electronic properties of spinel ferrites on their emissivity in middle and short wavebands10.1016/j.jssc.2019.121089 ↗
7. Application of Al-doped SiC high emissivity powder material based on infrared radiating coating10.14233/ajchem.2014.18127 ↗
8. Crystallization behavior and infrared radiation property of nickel–magnesium cordierite based glass–ceramics10.1016/j.jnoncrysol.2007.08.031 ↗
9. Solvothermal synthesis of spinel ZnFe2O4 nanoparticles with enhanced infrared radiation property10.1016/j.cplett.2019.136647 ↗
10. Infrared emissivity of Sr doped lanthanum manganites in coating form10.1016/j.jallcom.2011.05.072 ↗
11. The effect of microstructure on the middle and short waveband emissivity of CuO-doped CuxCo1−xFe2O4 spinel10.1016/j.jallcom.2019.02.119 ↗
12. High infrared emissivity energy-saving coatings based on LaMnO3 perovskite ceramics10.1016/j.ceramint.2022.03.289 ↗
13. A highly accurate interatomic potential for LaMnO3 perovskites with temperature-dependence of structure and thermal properties10.1016/j.commatsci.2021.110406 ↗
14. Reactivity at the Ln2NiO4+δ/electrolyte interface (Ln = La, Nd) studied by electrochemical impedance spectroscopy and transmission electron microscopy10.1016/j.jpowsour.2014.04.082 ↗
15. Low-temperature processing technique of Ruddlesden-Popper cathode for high-performance solid oxide fuel cells10.1016/j.jallcom.2021.159092 ↗
16. Oxygen migration and proton diffusivity in transition-metal (Mn, Fe, Co, and Cu) doped Ruddlesden-Popper oxides, Journal of materials chemistry10.1039/C9TA05893A ↗
17. Elaboration and studies of physical and photo-electrochemical properties of La2NiO4 and its use with SnO2 in photo-evolution of hydrogen under visible light irradiation10.1016/j.ijleo.2021.166654 ↗
18. Study on infrared radiation properties of La3Ni2O7-based infrared radiative coatings
19. Influence of different sintering techniques on microstructure and phase composition of oxygen-transporting ceramic10.1016/j.jeurceramsoc.2015.03.039 ↗
20. WCA, La-based perovskite precursors preparation and its catalytic activity for CO2 reforming of CH410.1016/S0167-577X(03)00341-0 ↗
21. Synthesis and electrical conductivity of La2NiO4+δ derived from a polyaminocarboxylate complex precursor10.1016/j.matlet.2005.12.044 ↗
22. Anisotropic growth of La2NiO4+δ: Influential pre-treatment in molten-flux synthesis10.1016/j.jcrysgro.2019.06.021 ↗
23. Preparation and characterization of supported dense oxygen permeating membrane of mixed conductor La2NiO4+δ10.1016/S0376-7388(03)00190-X ↗
24. Comparison of electrochemical response and electric field emission characteristics of pristine La2NiO4 and La2NiO4/CNT composites: Origin of multi-functionality with theoretical penetration by density functional theory10.1016/j.electacta.2020.137676 ↗
25. Synthesis of La2NiO4 via a PVA-based route10.1016/j.ceramint.2011.05.137 ↗
26. Sintering, microstructure and conductivity of La2NiO4+δ ceramic10.1016/j.ceramint.2007.02.003 ↗
27. Chromium deposition and poisoning of La2NiO4 cathode of solid oxide fuel cell10.1098/rsos.180634 ↗
28. Effects of molten salt temperature and holding time on synthesis of hercynite by molten salt method10.1016/j.ceramint.2022.01.012 ↗
29. Molten-salt method for the synthesis of zeolitic materials; II, Characterization of zeolitic materials10.1016/S1387-1811(99)00195-X ↗
30. Preparation of ZnNb2O6 powders by molten salt method10.4028/www.scientific.net/AMR.412.94 ↗
31. Defect generation and morphology transformation mechanism of CeO2 particles prepared by molten salt method10.1016/j.ceramint.2022.10.007 ↗
32. Effect of LiF dosage on morphology of ZrO2 prepared by the molten salt method
33. Synthesis and characterization of submicro-sized V2AlC ceramics by a two-step modified molten salt method10.1016/j.ceramint.2021.02.183 ↗
34. Flux-mediated crystal growth of metal oxides: synthetic tunability of particle morphologies, sizes, and surface features for photocatalysis research10.1039/C4CE01587H ↗
35. Effect of raw material particle size on the synthesis of La2Zr2O7 by the molten salt method10.1021/acs.inorgchem.2c04473 ↗
36. Role of magnetic fluctuations on the temperature dependence of the resistivity of a La2NiO4.11 single crystal10.1016/S1293-2558(03)00038-4 ↗
37. Role of pO2 and film microstructure on the memristive properties of La2NiO4+δ/LaNiO3−δbilayers10.1039/D1TA10296F ↗
38. Construction of single-crystal nanoparticles assembled CuFe2O4 spinel microspheres towards high infrared emissivity10.1016/j.jallcom.2022.167365 ↗
39. Band gap and oxygen vacancy engineering of honeycomb‐like CuFe2O4 spinels toward enhanced high infrared emissivity10.1111/jace.19067 ↗
40. Facile solid-state synthesis of tetragonal CuFe2O4 spinels with improved infrared radiation performance10.1016/j.ceramint.2021.12.268 ↗
41. First-principle calculations and experimental investigation on the infrared emissivity property of Mg-doped ZnO10.1016/j.materresbull.2017.08.011 ↗
42. First-principles and experimental studies of the IR emissivity of Sn-doped ZnO10.1016/j.mssp.2013.04.010 ↗
43. A facile hydrothermal synthesis of nanoscale CuFe2O4 spinels with enhanced infrared radiation performance10.1016/j.jallcom.2017.11.370 ↗
44. Effects of solvents on the synthesis and infrared radiation emissivity of CuFe2O4 spinels10.1016/j.jallcom.2018.06.010 ↗
45. Enhanced infrared radiation properties of CoFe2O4 by doping with Y3+ via sol–gel auto-combustion10.1016/j.ceramint.2014.04.147 ↗
46. Acetate-intercalated Ni–In layered double hydroxides with low infrared emissivity: Synthesis, delamination and restacked to form the multilayer films10.1016/j.apsusc.2013.10.109 ↗
47. Properties and performance of La2NiO4+δ-LaNiO3 composite cathodes for intermediate-temperature solid oxide fuel cells10.1080/00150193.2013.848763 ↗
48. Oxygen electrode reaction on Nd2NiO4+δ cathode materials: impedance spectroscopy study10.1016/S0167-2738(02)00689-6 ↗
49. Oxygen ion transport in La2NiO4-based ceramics10.1039/a903276b ↗
50. A comparative study of different concentrations of (Co/Ni/Cu) effects on elastic properties of Li–Mn ferrite employing IR spectroscopy and ultrasonic measurement10.1016/j.ceramint.2021.06.071 ↗
51. Dependence of the infrared emissivity on SiC content and microstructure of microarc oxidation ceramic coatings formed in Na2SiO3 electrolyte10.1016/j.apsusc.2017.06.166 ↗
52. Effect of surface morphology and densification on the infrared emissivity of C/SiC composites10.1016/j.apsusc.2014.06.044 ↗