journal article·2023-10

Engineering twin boundaries for enhancing strength and ductility of thermoelectric semiconductor PbTe

Min Huang, Pengcheng Zhai, Sergey I. Morozov, William A. Goddard, Guodong Li, Qingjie Zhang

Publisher page

Abstract

Twin boundary engineering is a potential strategy for achieving robust mechanical properties of materials. Our previous molecular dynamics simulations indicated that the nanotwin could significantly enhance the ductility of thermoelectric (TE) semiconductors PbTe due to coherent twin boundary (CTB) migration accompanied by the 'catching bond' at room temperature. To further improve the mechanical strength or ductility of PbTe, we investigated the role of the shear direction, the CTB orientation and the temperature on mechanical properties of nanotwinned PbTe. Under the shear stress along [1̅10] loading direction, the partial dislocations with a/6 [121] and a/6 [21̅1] Burgers vectors are preferentially activated on (111) twin plane with higher yield strength and ultimate shear strength than that of the (111)[112] slip system. The nanotwinned PbTe with CTB orientation ranging from 125° to 161° has both higher fracture strain and larger ultimate shear strength than 0° CTB orientation. This is attributed to the motion of the twinning partial dislocation significantly enhancing the ductility while the blocking of dislocations by CTBs further improving the shear strength and deformability of PbTe. Moreover, the low temperature (below 100 K) energetically enables the partial dislocation to nucleate and glide on the strong Te-CTB plane, which induces successive CTB migration along Pb- and Te-CTB planes, resulting in enhanced ductility of nanotwinned PbTe.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Multi-scale microstructural thermoelectric materials: transport behavior, non-equilibrium preparation, and applications10.1002/adma.201602013 ↗
2. Advances in thermoelectric materials research: looking back and moving forward10.1126/science.aak9997 ↗
3. Solar thermoelectric generators: pushing the efficiency up10.1038/nenergy.2016.172 ↗
4. Fracture toughness of thermoelectric materials10.1016/j.mser.2021.100607 ↗
5. Review of nanostructured devices for thermoelectric applications10.3762/bjnano.5.141 ↗
6. Skutterudite with graphene-modified grain-boundary complexion enhances zT enabling high-efficiency thermoelectric device10.1039/C6EE02467J ↗
7. Achieving ZT = 2.2 with Bi-doped n-type SnSe single crystals10.1038/ncomms13713 ↗
8. Complex doping of group 13 elements In and Ga in caged skutterudite CoSb310.1016/j.actamat.2014.11.022 ↗
9. Towards higher thermoelectric performance of Bi2Te3 via defect engineering10.1016/j.scriptamat.2015.06.031 ↗
10. Review of experimental approaches for improving zT of thermoelectric materials10.1016/j.mssp.2020.105303 ↗
11. 3D printing fabrication of amorphous thermoelectric materials with ultralow thermal conductivity10.1002/smll.201502153 ↗
12. Yb14MnSb11: new high efficiency thermoelectric material for power generation10.1021/cm060261t ↗
13. Promising Zintl-phase thermoelectric compound SrAgSb10.1021/acs.chemmater.0c02317 ↗
14. Thermal cycling, mechanical degradation, and the effective figure of merit of a thermoelectric module10.1007/s11664-012-2366-1 ↗
15. Deformable inorganic semiconductor10.1038/s41563-018-0066-9 ↗
16. Micro- and macromechanical properties of thermoelectric lead chalcogenides10.1021/acsami.7b15651 ↗
17. Thermoelastic stress analysis of multilayered films in a micro-thermoelectric cooling device10.1007/s10409-012-0207-3 ↗
18. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
19. Deformation twinning in nanocrystalline materials10.1016/j.pmatsci.2011.05.001 ↗
20. Simultaneously increasing the ductility and strength of ultra-fine-grained pure copper10.1002/adma.200601472 ↗
21. Phonon scattering by nanoscale twin boundaries10.1016/j.nanoen.2016.12.026 ↗
22. Dramatically reduced lattice thermal conductivity of Mg2Si thermoelectric material from nanotwinning10.1016/j.actamat.2019.02.041 ↗
23. Strong anharmonic phonon scattering induced giant reduction of thermal conductivity in PbTe nanotwin boundary10.1103/PhysRevB.97.085304 ↗
24. Simultaneous optimization of electrical and thermal transport properties of Bi0.5Sb1.5Te3 thermoelectric alloy by twin boundary engineering10.1016/j.nanoen.2017.05.031 ↗
25. The influence of twin boundary on lattice thermal conductivity of thermoelectric InSb10.1063/5.0068007 ↗
26. Realizing enhanced thermoelectric performance and hardness in icosahedral Cu5FeS4−xSex with high-density twin boundaries
27. Superstrengthening Bi2Te3 through nanotwinning10.1103/PhysRevLett.119.085501 ↗
28. Enhanced strength through nanotwinning in the thermoelectric semiconductor InSb10.1103/PhysRevLett.119.215503 ↗
29. Mechanical response and plastic deformation of coherent twin boundary with perfect and defective structures10.1016/j.mechmat.2019.103266 ↗
30. Shear induced deformation twinning evolution in thermoelectric InSb10.1038/s41524-021-00581-x ↗
31. Modeling grain size dependent optimal twin spacing for achieving ultimate high strength and related high ductility in nanotwinned metals10.1016/j.actamat.2011.05.027 ↗
32. Plastic deformation mechanisms of tension-compression asymmetry of nano-polycrystalline tial: Twin boundary spacing and temperature effect10.1016/j.commatsci.2019.109218 ↗
33. Transition of dislocation nucleation induced by local stress concentration in nanotwinned copper10.1038/ncomms8648 ↗
34. Size and strain rate effects in tensile strength of penta-twinned Ag nanowires10.1007/s10409-017-0675-6 ↗
35. Influence of loading directions on dislocation slip mechanism of nanotwinned Ni with void defect at the twin boundary10.1016/j.commatsci.2018.05.026 ↗
36. Effects of twin boundary orientation on plasticity of bicrystalline copper micropillars: a discrete dislocation dynamics simulation study10.1016/j.actamat.2019.07.007 ↗
37. Enhancement of mechanical properties of InSb through twin boundary engineering10.1016/j.scriptamat.2022.114734 ↗
38. Temperature-dependent anharmonic effects on shear deformability of Bi2Te3 semiconductor10.1016/j.scriptamat.2021.114016 ↗
39. Temperature-dependent mechanisms of dislocation–twin boundary interactions in Ni-based equiatomic alloys10.1016/j.actamat.2021.116886 ↗
40. Temperature dependence of single twin boundary motion in Ni–Mn–Ga martensite10.1063/1.3573860 ↗
41. Dynamically compressive behaviors and plastic mechanisms of a CrCoNi medium entropy alloy at various temperatures10.1007/s10409-022-09003-w ↗
42. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗
43. Nano-twin-induced exceptionally superior cryogenic mechanical properties of a Ni-based GH3536 (Hastelloy X) superalloy
44. Large enhancement of thermoelectric properties in n-type PbTe via dual-site point defects10.1039/C7EE01871A ↗
45. Lattice dislocations enhancing thermoelectric PbTe in addition to band convergence
46. Nanotwin-induced ductile mechanism in thermoelectric semiconductor PbTe10.1016/j.matt.2022.03.010 ↗
47. Pressure tensor of partial-charge and point-dipole lattices with bulk and surface geometries10.1103/PhysRevB.49.755 ↗
48. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
49. Molecular dynamics simulations of lattice thermal conductivity and spectral phonon mean free path of PbTe: Bulk and nanostructures10.1016/j.commatsci.2011.08.016 ↗
50. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
51. Neutron powder diffraction study of strain and crystallite size in mechanically alloyed PbTe10.1016/S0022-4596(03)00017-3 ↗