Modulated crystallization and enhanced stable of high efficient perovskite solar cells with Pb(Ac)2
Source abstract
Abstract
α-Formamidinium lead iodide (α-FAPbI 3 ) has become one of the most promising candidate materials for stable perovskite solar cells (PSCs) owing to their outstanding optoelectronic properties and high thermal stability. The crystallinity of the active layer of perovskite is essential to the performance of perovskite solar cells. In this paper, we added lead acetate Pb(Ac) 2 as a grain growth agent into the perovskite precursor solution to prepare high-efficiency and stable perovskite solar cells. It was revealed that the crystals of Pb(Ac) 2-modified film grew selectively along the [200] direction and that the FAPbI 3 active layer grains were arranged neatly and densely, due to the significant influence of a moderate amount of weakly acidic Ac - on the crystal growth of FAPbI 3. The relative reduction in its grain boundaries led to the decrease in the grain boundary impedance, and it was easier for electrons to perform long-range migration in the perovskite active layer. The beneficial effects of Pb(Ac) 2 were further expiored by femtosecond Fs-TA measurements and density of states (tDOS) analysis, where the carrier lifetimes τ 2 was increased from 482.4 ps to 1340 ps, and the trap density of film states was significantly reduced. The filling factor (FF) and power conversion efficiency (PCE) were increased from 76.5% and 19.7–81.1% and 21.8%, respectively, the Pb(Ac) 2 devices were placed in air for 800 h for the light aging test, and the test results still maintained 90% of the original efficiency, which improved the stability of FAPbI 3 crystals.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Perovskite solar cells: must lead be replaced - and can it be done?10.1080/14686996.2018.1460176 ↗
2. Fast and accurate artificial neural network potential model for MAPbI3 perovskite materials10.1021/acsomega.9b00378 ↗
3. The introduction of a perovskite seed layer for high performance perovskite solar cells10.1039/C8TA07617K ↗
4. Semi-Planar non-fullerene molecules enhance the durability of flexible perovskite solar cells
5. Critical assessment of the use of excess lead iodide in lead halide perovskite solar cells10.1021/acs.jpclett.0c01820 ↗
6. High- performance perovskite solar cells based on passivating interfacial and intergranular defects10.1016/j.solmat.2020.110555 ↗
7. Defect passivation using ultrathin PTAA layers for efficient and stable perovskite solar cells with a high fill factor and eliminated hysteresis10.1039/C9TA08314F ↗
8. In situ growth of ultra-thin perovskitoid layer to stabilize and passivate MAPbI3 for efficient and stable photovoltaics10.1016/j.esci.2021.09.005 ↗
9. Ni substitution effect on the structure, magnetization, resistivity and permeability of zinc ferrites10.1039/D0TC05692H ↗
10. Magnetotransport properties and phase separation in iron substituted lanthanum-calcium manganite10.1088/2053-1591/aad118 ↗
11. Effect of doping of Ce4+/3+ on optical, strength and shielding properties of (0.5-x)TeO2-0.25MoO-0.25Bi2O3-xCeO2 glasses10.1016/j.matchemphys.2021.124444 ↗
12. Effect of Fe doping on structure, magnetic and electrical properties La0.7Ca0.3Mn0.5Fe0.5O3 manganite10.1016/j.ceramint.2018.05.124 ↗
13. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
14. High-Quality α-FAPbI3 film assisted by lead acetate for efficient solar cells10.1002/solr.202100747 ↗
15. FAPbI3-Based perovskite solar cells employing hexyl-based ionic liquid with an efficiency over 20% and excellent long-term stability10.1002/adfm.202002964 ↗
16. Superhalogen passivation for efficient and stable perovskite solar cells10.1002/solr.202200013 ↗
17. Inhibition of PbI2-induced defects by doping MABr for high-performance perovskite solar cells10.1039/D2NR01626E ↗
18. Interfacial defect passivation and charge carrier management for efficient perovskite solar cells via a highly crystalline small molecule10.1021/acsenergylett.1c01898 ↗
19. Sulfonate-Assisted surface iodide management for high-performance perovskite solar cells and modules10.1021/jacs.1c03419 ↗
20. Understanding how excess lead iodide precursor improves halide perovskite solar cell performance10.1038/s41467-018-05583-w ↗
21. Suppressed recombination for monolithic inorganic perovskite/silicon tandem solar cells with an approximate efficiency of 23%10.1016/j.esci.2022.04.001 ↗
22. Yttrium-doped Sn3O4 two-dimensional electron transport material for perovskite solar cells with efficiency over 23%10.1002/eom2.12202 ↗
23. The effect of illumination on the formation of metal halide perovskite films10.1038/nature22072 ↗
24. Impact of grain boundaries on efficiency and stability of organic-inorganic trihalide perovskites10.1038/s41467-017-02331-4 ↗
25. Ionic additive engineering toward high-efficiency perovskite solar cells with reduced grain boundaries and trap density
26. Grain growth of MAPbI3 via diethylammonium bromide induced grain mergence10.1021/acsami.0c01672 ↗
27. Study on photovoltaic stability and performance by incorporating tetrabutyl phosphonium iodide into the active layer of a perovskite type photovoltaic cell10.1039/D0RA04630B ↗
28. Enhanced efficiency of semitransparent perovskite solar cells via double- sided sandwich evaporation technique for four terminal perovskite-silicon tandem application10.3390/nano12091569 ↗
29. Moth eye-inspired highly efficient, robust, and neutral-colored semitransparent perovskite solar cells for building-integrated photovoltaics10.1002/eom2.12117 ↗
30. The trapped charges at grain boundaries in perovskite solar cells10.1002/adfm.202107125 ↗
31. Morphology evolution of a high-efficiency PSC by modulating the vapor process10.1002/smll.202003582 ↗
32. Organic molecule assisted growth of perovskite films consisting of square grains by surface-confined process10.3390/nano11020473 ↗
33. Mesoporous PbI2 assisted growth of large perovskite grains for efficient perovskite solar cells based on ZnO nanorods10.1016/j.jpowsour.2017.01.024 ↗
34. Recent progress in perovskite solar cells: the perovskite layer10.3762/bjnano.11.5 ↗
35. Solvent engineering as a vehicle for high quality thin films of perovskites and their device fabrication10.1002/smll.202008145 ↗
36. Alkali chlorides for the suppression of the interfacial recombination in inverted planar perovskite solar cells10.1002/aenm.201970068 ↗
37. Multifunctional CNT: TiO2 additives in spiro-OMeTAD layer for highly efficient and stable perovskite solar cells10.1002/eom2.12099 ↗
38. Alkali additives enable efficient large area (>55 cm2) slot-die coated perovskite solar modules10.1002/adfm.202113026 ↗
39. Improved performance of printable perovskite solar cells with bifunctional conjugated organic molecule10.1002/adma.201705786 ↗
40. Additive engineering to grow micron‐sized grains for stable high efficiency perovskite solar cells10.1002/advs.201901241 ↗
41. Dual additive for simultaneous improvement of photovoltaic performance and stability of perovskite solar cell
42. Enhanced device performances of MAFACsPb(IxBr1–x) perovskite solar cells with dual-functional 2-Chloroethyl acrylate additives10.1021/acsami.0c08989 ↗
43. Zwitterion-Stabilizing scalable bladed α-Phase Cs0.1FA0.9PbI3 films for efficient inverted planar perovskite solar cells10.1021/acssuschemeng.0c00417 ↗
44. Organic polymers as additives in perovskite solar cells10.1021/acs.macromol.1c00665 ↗
45. Dual passivation of perovskite defects for light-emitting diodes with external quantum efficiency exceeding 20%10.1002/adfm.201909754 ↗
46. Carbon materials in perovskite solar cells: prospects and future challenges10.1002/eem2.12035 ↗
47. Elucidating the effect of the lead iodide complexation degree behind the morphology and performance of perovskite solar cells10.1039/C6NR09819C ↗
48. Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes10.1038/ncomms8081 ↗
49. Efficient perovskite solar cells by metal ion doping10.1039/C6EE01969B ↗
50. Efficient and stable CH3NH3PbI3−x(SCN)x planar perovskite solar cells fabricated in ambient air with low-temperature process10.1016/j.jpowsour.2017.11.070 ↗
51. Tailoring multifunctional anion modifiers to modulate interfacial chemical interactions for efficient and stable perovskite solar cells10.1016/j.nanoen.2022.107747 ↗
52. Performance enhancement of perovskite solar cells induced by lead acetate as an additive10.1002/solr.201800066 ↗
53. Acetic acid assisted crystallization strategy for high efficiency and long-term stable perovskite solar cell
54. Lead acetate produced from lead-acid battery for efficient perovskite solar cells10.1016/j.nanoen.2019.104380 ↗
55. One-step spray-coated all-inorganic CsPbI2Br perovskite solar cells10.1021/acsaem.1c00054 ↗
56. Formamidine acetate induces regulation of crystallization and stabilization in Sn-Based perovskite solar cells10.1021/acsami.1c05097 ↗
57. The trapped charges at grain boundaries in perovskite solar cells10.1002/adfm.202107125 ↗
58. Ethylamine iodide additive enables solid-to-solid transformed highly oriented perovskite for excellent photodetectors
59. Stabilization of the metastable lead iodide perovskite phase via surface functionalization10.1021/acs.nanolett.7b01500 ↗
60. Tuning molecular interactions for highly reproducible and efficient formamidinium perovskite solar cells via adduct approach10.1021/jacs.8b01037 ↗
61. Methylammonium chloride induces intermediate phase stabilization for efficient perovskite solar cells10.1016/j.joule.2019.06.014 ↗
62. Synthesis of highly-oriented black CsPbI3 microstructures for high-performance solar cells10.1021/acs.chemmater.0c00427 ↗
63. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
64. Controlled growth of textured perovskite films towards high performance solar cells10.1016/j.nanoen.2016.06.041 ↗
65. Photovoltaically top-performing perovskite crystal facets10.1016/j.joule.2022.09.012 ↗
66. Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity10.1126/science.abf7652 ↗
67. Suppressing the excessive solvated phase for dion-jacobson perovskites with improved crystallinity and vertical orientation10.1002/solr.202000371 ↗
68. Electronic processes at grain boundaries in polycrystalline semiconductors under optical illumination10.1109/T-ED.1977.18747 ↗
69. The electrical properties of polycrystalline silicon films10.1063/1.321593 ↗
70. Effects of surface states and of excitation on barrier heights in a simple model of a grain boundary or a surface10.1063/1.333038 ↗
71. Overstraeten, on the injection level dependence of the minority carrier lifetime in defected silicon substrates10.1016/0038-1101(84)90189-8 ↗
72. Heterostructural CsPbX3-PbS (X=Cl, Br, I) Quantum Dots with Tunable Vis–NIR Dual Emission10.1021/jacs.9b13681 ↗
73. Femtosecond transient absorption spectra and dynamics of carrier relaxation of tin perovskites in the absence and presence of additives10.1021/acs.jpclett.0c01589 ↗
74. Origin and elimination of photocurrent hysteresisby fullerene passivation in CH3NH3PbI3 planarheterojunction solar cells10.1038/ncomms6784 ↗